scentify V2 Lux Diffuser User Manual

scentify V2 Lux Diffuser User Manual

scentify-logo

scentify V2 Lux Diffuser

scentify-V2-Lux-Diffuser-product

Varoitus

Lue kaikki ohjeet ennen tuotteen käyttöä.

(DANGER]

  • Use in environments between -10°C and 50°C only. Operation outside this ange may damage the product and cause satety hazards. For use below 2000m altitude only
  • Use only the specified rated voltage. Otherwise, safety risks may occur.
  • Älä altista akkua tai laitetta tulelle tai liian korkeille lämpötiloille.

[VAROITUS]

  • Use only the recommended vaporizing medium. Other substances may produce toxic gases or pose a fire risk.
  • Use only in conjunction with the supplied power supply device.
  • Use only the safe ultra-low voltage specified by the appliance to prevent malfunction.
  • If the supply cord is damaged, replace it with a special cord o ssemblv available trom the manutacturer or service agent on . Rechargeable batteries may only be replaced by qualified personne drv batteries excepted’ Do not tamper with original operating devices or functions.
  • RED Article 10 (2)
  • This product can be used across EU member states RED Article 10 (10)
  • Rungon ja tuotteen välinen RF-etäisyys on 20 cm
  • Frequency Range: 2402-2480M Hz
  • Max.RF Output Power: -1.92 dBm

FCC:n lausunto

Tämä laite on FCC-sääntöjen osan 15 mukainen. Toiminta on kahden seuraavan ehdon alaista:

  1. Tämä laite ei saa aiheuttaa haitallisia häiriöitä ja
  2. tämän laitteen on hyväksyttävä kaikki vastaanotetut häiriöt, mukaan lukien häiriöt, jotka voivat aiheuttaa ei-toivottua toimintaa.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference hv one or more of the followine measures*

  • Suuntaa uudelleen vastaanottoantenni.
  • Lisää laitteen ja vastaanottimen välistä etäisyyttä.
  • Liitä laite pistorasiaan, joka on eri piirissä kuin se, johon vastaanotin on kytketty.
  • Pyydä apua jälleenmyyjältä tai kokeneelta radio-/TV-teknikolta.

FCC varoitus:

Any changes or modifications not expressly approved by th arty responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter. Not applicable

RF-valotus

Tämä laite noudattaa FCC:n säteilyaltistusrajoja, jotka on asetettu hallitsemattomalle ympäristölle. Tämä laite tulee asentaa ja sitä tulee käyttää siten, että jäähdyttimen ja kehon välinen etäisyys on vähintään 20 cm.

ISED-lausunto

Tämä laite sisältää lisenssivapaat lähettimet/vastaanottimet, jotka ovat Kanadan Innovation, Science and Economic Development Canadan lisenssivapaan RSS-standardin mukaisia. Toiminta on kahden seuraavan ehdon alaista:

  1. Tämä laite ei saa aiheuttaa häiriöitä.
  2. Tämän laitteen on hyväksyttävä kaikki häiriöt, mukaan lukien häiriöt, jotka voivat aiheuttaa laitteen ei-toivottua toimintaa. Digitaalinen laite on Kanadan CAN ICES – 3 (B)/NMB – 3 (B) mukainen.

TEKNISET TIEDOT

  • Product Name Lux Diffuser V2
  • Model Scentify Lux
  • Diffuser V2
  • Dimensions 10 × 8 × 4in
  • Oil capacity 200ml
  • Voitage 6.3 W.
  • Power Consumption 100ml

TÄRKEÄÄ

Do not pour oil directly into the device Keep upright at all times Tilting may cause damage

ALOITTAMINEN

scentify-V2-Lux-Diffuser-fig-1

PAINIKKEET

scentify-V2-Lux-Diffuser-fig-2Tehoa
Paina ja pidä pohjassa 3 sekuntia kytkeäksesi diffuusorin päälle tai pois päältä.

scentify-V2-Lux-Diffuser-fig-3Säädä intensiteettiä

  • Press+ to increase intensity.
  • Press_ to decrease intensity

Ympäristön valaistus
Short press the power button to cycle through light colors.

Tehdasasetusten palautus
Press and hold + and -buttons simultaneously to restore factory settings.

INTENSIITEETIT

scentify-V2-Lux-Diffuser-fig-18

CONNECTING YOUR DIFFUSER – BLUETOOTH

  1. Open the Scentify App
    • Tap Bluetooth Connection
    • See Connection Tips below if your diffuser does not appearscentify-V2-Lux-Diffuser-fig-4
  2. Select Your Diffuser
    • Choose your diffuser from the device listscentify-V2-Lux-Diffuser-fig-5
  3. Anna salasana
    • Enter the default password: 8888 Tap Loginscentify-V2-Lux-Diffuser-fig-6
  4. Change password (optional)
    • Tap the About tab
    • Tap Change Passwordscentify-V2-Lux-Diffuser-fig-7
  5. Edit Device Name (optional)
    • Tap the device name or label to edit it
    • Napauta Tallennascentify-V2-Lux-Diffuser-fig-8KYTKENTÄVINKKEJÄ
      • Varmista, että Bluetooth on käytössä puhelimessasi
      • Allow Bluetooth permissions when prompted
      • Stay close to the diffuser during setup
      • If permissions were denied, enable Bluetooth access in your phone settings
      • Make sure the diffuser is powered on before connecting
  6. Change Light color
    • Tap the color icons to change the color of the diffuser logo light.
  7. Säädä kirkkautta
    • Tap Brightness to adjust the logo light brightness (Off, Low, or High).scentify-V2-Lux-Diffuser-fig-9
  8. Kalibroida
    • When the bottle is empty, tap Calibrate to reset the oil level to 0% Refill the bottle with oil (up to 200ml)
    • The diffuser will automatically synchronize and track the remaining oil level based on the amount added
  9. ON/OFF-painike
    • Tap to turn the diffuser on or off
  10. Valitse aikataulu
    • Tap a schedule to edit settings
    • Tap + to add a new schedule Swipe left to delete a schedulescentify-V2-Lux-Diffuser-fig-10
  11. Set Operating Hours
    • Select the start and end time for your schedule
  12. Select Repeat Days
    • Choose the days you want the diffuser to run
    • All days are selected by default
  13. Säädä intensiteettiä
    • Use – or+ to adjust intensity levels
  14. Create Custom Intensity
    • Set custom spray and pause durations
  15. Tallenna asetukset
    • Tap Save to apply your schedule and settingsscentify-V2-Lux-Diffuser-fig-11

CONNECTING TO APP – WIFI

  1. Open the Scentify App
    • Tap WiFi Connection
    • Make sure your phone is connected to a 2.4GHz WiFi networkscentify-V2-Lux-Diffuser-fig-12
  2. Login or Create an Account
    • Login to your existing account Or create a new accountscentify-V2-Lux-Diffuser-fig-13
  3. Add Your Diffuser
    • Napauta Lisää laite
    • Select your diffuser from the device list
    • Napauta Lisääscentify-V2-Lux-Diffuser-fig-14
  4. Valitse WiFi-verkkosi
    • Choose your WiFi network Enter your WiFi password
    • Make sure your phone is connected to the same network
    • NOTE: Only 2.4GHz WiFi networks are supported. scentify-V2-Lux-Diffuser-fig-15
  5. Täydellinen asennus
    • Wait while the app connects the diffuser to the cloud and initializes the device. Keep your smartphone and diffuser close to the router during setup. When setup is complete, enter a custom name for the diffuser if desired. Tap Confirm to finish.scentify-V2-Lux-Diffuser-fig-16
  6. Määritä laiteasetukset
    • Tap your diffuser to access Device Control For scheduling, intensity settings, calibration, and other app functions, see the Bluetooth Setup & App Settings pagescentify-V2-Lux-Diffuser-fig-17

KYTKENTÄVINKKEJÄ

  • Make sure Bluetooth and WiFi are enabled on your phone
  • Use a 2.4GHz WiFi network during setup
  • Make sure your phone is connected to the same WiFi network you are connecting the diffuser to
  • Allow Bluetooth and Location permissions when prompted
  • Stay close to the diffuser during setup
  • If permissions were denied, enable Bluetooth and Location access in your phone settings
  • Make sure the diffuser is powered on before connecting

VIANETSINTÄ

scentify-V2-Lux-Diffuser-fig-19

PUHDISTUS

  1. Remove the oil bottle from the diffuser.
  2. Empty any remaining fragrance oil from the bottle.
  3. Fill the bottle with isopropyl alcohol (rubbing alcohol). For a deeper cleaning, warm water and white vinegar may also be used.
  4. Remove the bottle and empty any remaining liquid
  5. Run the diffuser at the highest intensity setting for approximately 15 minutes to flush the internal system.
  6. Remove the bottle and empty any remaining cleaning solution.
  7. Allow all parts to fully dry before refilling with fragrance oil.

HUOLTO & SÄILYTYS

  • Power off the diffuser when the bottle is empty.
  • Remove the oil bottle before transporting or storing the diffuser.
  • Store the diffuser upright in a cool, dry location at normal room temperature. Clean the diffuser periodically to maintain optimal performance.
  • Inspect the bottle, tubing, and seals periodically for wear or damage.

RESET THE DIFFUSER

Press and hold the + and – buttons simultaneously for approximately 5 seconds to restore factory settings.

Need Additional Help? Contact support at info@scentify.com

Asiakirjat / Resurssit

PDF thumbnailV2 Lux Diffuser
User Manual · MO405, 2BBB5-MO405, 2BBB5MO405, STF-H100, V2 Lux Diffuser, V2, Lux Diffuser, Diffuser

Viitteet

Esitä kysymys

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Esitä kysymys

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.