LTECH LED Controller (Single-zone)

The Mini Pro series LED remote control uses RF 2.4GHz wireless transmission technology, with a control distance (unobstructed) of up to 30 meters. When paired with the P-series controllers (P1/P2/P3/P4/P5), one controller is compatible with 5 outputs, supporting five types of lighting fixtures: DIM/CT/RGB/RGBW/RGBCW. One remote control can control numerous controllers within its effective range, enabling functions such as turning lights on/off, adjusting brightness, adjusting color temperature and RGB static colors, dynamic mode effects, and scene recall, meeting users’ needs for different lighting applications. For example, the dimming remote (M1A/M1B) has a quick brightness function, allowing one-button switching of brightness percentage; the color temperature remote (M2A/M2B) has a night light function, allowing one-button switching to low brightness; the RGBW remote (M4A/M4B) and RGBCW remote (M5A/M5B) can switch dynamic modes via mode buttons, or achieve a 9-mode loop effect via remote control combination keys.

Tekniset parametrit

Malli	M1A	M1B	M2A	M2B	M4A	M4B	M5A	M5B
Väri	Valkoinen	Musta	Valkoinen	Musta	Valkoinen	Musta	Valkoinen	Musta
Himmennystyyppi	HIMMEÄ		CT		RGB/ RGBW		RGBCW
Langaton tyyppi	RF 2.4 GHz
Working voltage	3Vdc (Button battery CR2032×1)
Valmiustilavirta	＜ 2uA
Distance of the remote	30M (Under unobstructed conditions)
Työlämp.	-25 ℃ ~ 50 ℃
Paino	40g±10g
Mitat	104×58×9mm (remote)，108×63×14mm (remote+hold)

Mitat

Tuotteen asennus

Two ways to fix the remote holder :

1. Kiinnitä kaukosäätimen pidike seinään kahdella ruuvilla.
2. Kiinnitä kaukosäätimen pidike seinään 3M-liimalla.
   • Huomautus: Vedä akun kieleke ulos ennen ensimmäistä käyttöä

Vaihtoakku

1. Use a screwdriver to unscrew the bottom screw
2. Pull out the battery compartment and replace the battery

Painikkeiden toiminnot

Dimming Remote Control M1A/M1B

• Power: Turns the light on or off. Brightness
• Touch Ring: Touch to change the light’s brightness.
• Brightness +/-: Adjusts the brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 4 Brightness Settings: 25%, 50%, 75%, 100% (4 brightness levels with shortcut keys).
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

Color Temperature Remote Control M2A/M2B

• Power: Turns the light on or off. Color Temperature Touch Ring: Touch to change the light’s color temperature.
• Night Light: Switches to low brightness, night light mode.
• Brightness +/-: Adjusts brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• 3 Color Temperatures: Cool White, White Light, Warm Light; 3 color temperature shortcut keys.
• Scene: Short press to recall a scene; long press for 3 seconds to save the current light state to the scene.

RGB/RGBW Remote Control M4A/M4B

• Power: Turns the lights on or off.
• Touch Color Ring: Touch the RGB color ring to select a color.
• Mode/Speed: Short press to switch dynamic modes; long press to adjust speed. Short press both “R” and “W” keys simultaneously to cycle through dynamic modes.
• Brightness +/-: Adjust brightness; short press for 10 levels; long press for 1-6 seconds for 255 levels of continuous adjustment.
• Red/Green/Blue: Short-press to turn the static red/green/blue channels on or off. Long press for 1-6 seconds to continuously adjust the brightness of the current channel.
• White Light: For RGBW lights, short-press to turn the W channel on or off; long-press for 1-6 seconds to continuously adjust the W brightness.
• Scene: Short press to recall the scene; long press for 3 seconds to save the current lighting state to the scene.

RGBCW Remote Control M5A/M5B

• Power: Turns the lights on or off.
• Touch Color Ring: Select colors using the touch color temperature/RGB color ring.
• Mode/Speed: Short press to switch between dynamic modes; long press to adjust speed. Short press the “R” and ” “ keys simultaneously to cycle through dynamic modes.
• Color Temperature: Short press to turn the color temperature channel on or off; touch the color ring to switch to the color temperature touch ring. Long press for 1-6 seconds to continuously adjust the brightness of the current color temperature.
• RGB: Short-press to turn the RGB channel on or off; touch the color ring to switch to the RGB touch ring. Long-press for 1-6 seconds to continuously adjust the brightness of the current color.
• Red/Green/Blue: Short press to turn the static red/green/blue channel on or off. Long-press for 1-6 seconds to continuously adjust the brightness of the current channel.
• Scene: Short press to recall the scene; long press for 3 seconds to save the currentlighting state to the scene.

Väri	R/G/B values
Punainen	R100% G0% B0%
Keltainen	R100% G100% B0%
Vihreä	R0% G100% B0%
Syaani	R0% G100% B100%
Sininen	R0% G0% B100%
Violetti	R100% G0% B100%
Valkoinen	R100% G100% B100%

Dynaaminen tila	Red-purple gradient	Staattinen tila	Punainen
	Blue-purple gradient
			Vihreä
	Color temperature gradient (warm yellow, cool white)
			Sininen
	Three-color gradient (RGB)
	Six-colo  gradient (red, green, blue, yellow, purple, cyan)		Keltainen
	Seven colors changing (red, green, blue, yellow, purple, cyan, white)		Violetti
	Seven-color gradient (red, green, blue, yellow, purple, cyan, white)
			Syaani
	Three-color gradient (RGB)
			Mixed light white
	White gradually brightens and darkens

Used with P series controllers

Koodipariliitos

Key pairing code

1. Short-press the controller’s ID learning button. The load indicator will start flashing. Please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Power-on code pairing

1. After the controller powers off and back on, please complete the following steps within 10 seconds.
2. Pairing with Mini Pro series Single-zone remote control: Press and hold the Power button until the load indicator flashes quickly and stays on, and the color ring changes. Pairing complete.

Huomautus: One controller can be paired with a maximum of 10 remote controllers. If more than 10 remote controllers are paired, the ID code of the first remote controller will be automatically deleted.

Tyhjennä koodi

To delete all remote controls: Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the remote controls together

Code pairing (assuming B learns from A)

1. Simultaneously press and hold the top two buttons on remote control B until the indicator light stays on, then release.
2. Within 5 seconds, press any button on remote control A. The indicator light on remote control B will turn off, indicating successful learning. *Remote controls of the same model can learn from each other.

Tyhjennä koodi
Simultaneously press and hold the top two buttons on the remote control for 6 seconds until the indicator light flashes twice, indicating successful code clearing.

Merkkivalon tila

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 6 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.
  • Huomautus: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Kuljetus ja varastointi

1. Transportation Products can be shipped via vehicles, boats, and planes. During transportation, products should be protected from rain and sun. Please avoid severe shock and vibration during the loading and unloading process.
2. Storage: The storage conditions should comply with the Class I Environmental Standards. The products that have been stored for more than six months are recommended to be re-inspected and can be used only after they have been qualified.

Huomioitavaa

Please use in a dry indoor environment:

• When installing the battery. pleæeconnectthepositive and negative terminals correctly. Ifthe remote will not be used for along period, take the battery out.
• When the remote distance is shorten and or the remote dæsn’t work frequently, please change the battery in time.
• Please carefully take it and put it down to prevent falls that cause damage.
• please donotattemptto fix products by yourself. If you have any question please contact your suppliers
• Tätä ohjekirjaa voidaan muuttaa ilman erillistä ilmoitusta. Tuotteen toiminnot riippuvat tavaroista. Ota rohkeasti yhteyttä virallisiin jälleenmyyjiimme, jos sinulla on kysyttävää.

Takuusopimus

• Takuuajat toimituspäivästä: 5 vuotta
• Free repair or replacement serv’icæ for quality problems is provided within warranty periods. Warranty exclusions below:
• The following conditions are not within the guarantee range of free repairing or replacement services:

Beyond warranty periods:

• Kaikki korkean volyymin aiheuttamat keinotekoiset vauriottage. overload. or improper operations; Products with severe physical damage:
• luonnonkatastrofien ja ylivoimaisen esteen aiheuttamat vahingot;
• Takuutarrat ja viivakoodit ovat vaurioituneet.
• No contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law
2. Our company has the right to amend or adjust the terms of this warranty. and release in written form shall prevail.

VAROITUS

• NIELEMISVAARA: Tämä tuote sisältää nappipariston tai kolikkopariston.
• Nieleminen voi aiheuttaa KUOLEMAN tai vakavan vamman.
• Nielty nappiparisto tai kolikkoparisto voi aiheuttaa sisäisiä kemiallisia palovammoja jopa 2 tunnissa.
• PIDÄ uudet ja käytetyt paristot POISSA LASTEN ULOTTUVILTA
• Hakeudu välittömästi lääkärin hoitoon, jos pariston epäillään nieltävän tai jonnetun kehon sisään
  • a) Poista ja kierrätä välittömästi tai hävitä käytetyt paristot paikallisten määräysten mukaisesti ja säilytä lasten ulottumattomissa. ÄLÄ hävitä paristoja talousjätteen mukana tai polta.
  • b) Myös käytetyt paristot voivat aiheuttaa vakavan vamman tai kuoleman.
  • c) Soita paikalliseen myrkytystietokeskukseen saadaksesi hoitotietoja.
  • d) The compatible battery type: CR2032.
  • e) Akun nimellistilavuustage: 3Vdc.
  • f) Ei-ladattavia paristoja ei saa ladata uudelleen.
  • g) Do not force discharge, recharge, disassemble, heat above (manufacturer’s specified temperature rating), or incinerate. Doing so may result in injury due to venting, leakage, or explosion, resulting in chemical burns.
  • h) Varmista, että paristot on asennettu oikein napaisuuden (+ ja -) mukaisesti.
  • i) Älä sekoita vanhoja ja uusia paristoja, eri merkkisiä tai erityyppisiä paristoja, kuten alkali-, hiili-sinkki- tai ladattavia paristoja.
  • j) Poista ja kierrätä välittömästi tai hävitä paristot laitteista, joita ei ole käytetty pitkään aikaan, paikallisten määräysten mukaisesti.
  • k) Kiinnitä paristolokero aina täysin. Jos paristolokero ei sulkeudu kunnolla, lopeta tuotteen käyttö, poista paristot ja pidä ne lasten ulottumattomissa.

Asiakirjat / Resurssit

LTECH LED Controller (Single-zone) [pdfKäyttöopas M1A, M1B, M2A, M2B, M4A, M4B, M5A, M5B, EX4S Single Zone RF-DMX RGBW Controller, EX4S, Single Zone RF-DMX RGBW Controller, RF-DMX RGBW Controller, RGBW Controller, Controller

Viitteet

• Käyttöopas