classic Line logo Electra logo

KÄYTTÖOHJE

Pääteosoitteen ohjelmoija

Electra PAS.17A Terminal Address Programmer 0

PRG.PAS.MCS
170 x 112 x 35 mm / 270 g
Plastic case + mechanical keyboard 0°C … 45°C – IP 31
Power supply: 9V (battery/rechargeable battery)
Connection to the terminal via UTP Patch Cable 0.25 cm
Addresses available for programming: between “000” and “998”
Typing “999” ends the address programming.
KUVAUS

The PRG.PAS.MCS programmer allows the programming of  the address (apartment number) for all types of terminals in the Klassinen linja range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.

CONNECTION TO THE TERMINAL

Electra PAS.17A Terminal Address Programmer 1

  1. UTP Patch Cable 0.25 cm
  2. Takaisin
  3. Edessä
  4. PRG.PAS.MCS Programmer
  5. Terminal video – audio (MCS.47X, PAS.27X, PAS.37X)
ON/OFF
  1. The programmer is turned on by pressing the ON key.
  2. The programmer turns off:
    – 3 seconds after entering the last digit of the programmed address;
    – 10 seconds after being turned on, if no key is pressed.
OHJELMOINTI

Vaihe 1: Connect the programmer to the terminal.
Vaihe 2: Paina ON key on the programmer → The display shows [Adresa post].
Vaihe 3: On the terminal, press and hold the Key plus avain.
Vaihe 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the Key plus key can be released.

07.2025 INS.PRG.PAS.MCS


VALMISTAJA EU:ssa:
ELECTRA srl
Parc Industrial Miroslava
Str. Principala 33, 707307, Jud. Iași – RO

Telephone-A1 Fax-A1 +40 232 214.370
Message-A1 sales@electra.ro
Globel AA1 www.electra.ro

TUKEA
ELECTRA Building Communications GmbH
Gadnergasse 71, Stockwerk 1, Büro Top 132
1110 Wien – AT

Telephone-A1 Fax-A1 +43 1 810 20 99
Message-A1 sales@electra-automation.at
Globel AA1 www.electra-automation.at

Asiakirjat / Resurssit

Electra PAS.17A Terminal Address Programmer [pdfKäyttöohje
PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A Terminal Address Programmer, PAS.17A, Terminal Address Programmer, Address Programmer, Programmer

Viitteet

Jätä kommentti

Sähköpostiosoitettasi ei julkaista. Pakolliset kentät on merkitty *