COOLO Zigbee Occupancy Sensor
Yliview
This Zigbee 3.0 occupancy sensor detects human presence and motion using an onboard radar sensor. It includes a status indicator and a reset/pairing button for network configuration, and it requires connection to a Zigbee gateway to pair, communicate, and upload data.
Tekniset tiedot
| Parametri | Tekniset tiedot |
|---|---|
| Tuotteen nimi | Zigbee Occupancy / Human Presence Sensor |
| Langaton protokolla | Zigbee 3.0 |
| Havaintokulma | ≥80° |
| Havaintoetäisyys | ≤5m |
| Työvoimatage | 3.0V DC |
| Akun tyyppi | CR2450 |
| Valmiustilavirta | ≤60uA |
| MMW Radar Frequency | 10GHz / 24GHz (Optional Versions) |
Ohjeet
Application remote control
Master home safety through mobile APP and know home safety status at any time.
Edistynyt liiketunnistin
P’R detects people or animals that are moving5m detectiordistance Whether day or night, can real-time monitoring
Go out, worry about burglars at home
Set a reminder of leave home, detect entering and leaving the mobile app, and receive the alarm
Don’t worry about getting p at night in the dark.
More security for light switches: night me PIR next to your bed, a-it of the senses ot the sensor to tun the I strip rx) more worrying me
Smart experience Beautiful life
With a motion sensor, the light automatically lights up in the hazy night when someone passes by, giving you enough security
The connection to the gateway is very simple and only requires two steps
Jakaminen
Share control of this device with your family or friends through the App to enhance your relationship,
Kuinka käyttää
- Power on: Align the opening tool with the battery compartment slot, rotate the battery cover anticlockwise to open and power on.
- Pair to Zigbee network: Press and hold the RESET button for 3 seconds, then release. Confirm the red LED flashes to enter network configuration mode.
- Install: Peel off the protective film from the adhesive pad on the base and firmly stick the sensor at the chosen location.
- Place for best coverage: Install at about 2.5m–3.5m above ground (or 1.5m–3.0m depending on environment).
Under normal use of users, the manufacturer provides a free 2- year product quality warranty (except for the panel) replacement, and provides lifelong maintenance quality assurance beyond the 2-year warranty period. The following conditions are not covered by the warranty:
- Damage caused by external factors such as artificial damage or water inflow;
- Käyttäjä purkaa tai asentaa tuotteen itse (lukuun ottamatta paneelin purkamista ja kokoamista);
- Tämän tuotteen teknisten parametrien lisäksi Ylivoimaisesta esteestä, kuten maanjäristyksestä tai tulipalosta, aiheutuvat tappiot;
- Asennus, johdotus ja käyttö ei ole ohjeen mukainen;
- Tuotteen parametrien ja skenaarioiden laajuuden ulkopuolella.
Pääsyasetukset:
Note: add an intelligent gateway before adding this device.
- Install the battery on the device and make sure the mobile phone is connected to the network.
- The first power-on will automatically enter the distribution network mode, or press the reset button (the reset button is on the back of the product) with the pin for more than 10 seconds, and the device indicator will flash to enter the distribution network mode. After the distribution network is successful, the distribution network indicator will go out.
- Open the app, click the gateway, and add a subdevice under the gateway. Make sure that the system automatically searches for the device after the indicator light flashes. After waiting for one minute, the system can automatically add the device.
Tuotteen rakennekaavio
Asennusmenetelmä:
Take the product out of the package, stick the double-sided adhesive tape on the back center of the product, tear off the protective paper of the adhesive tape, and paste it at any place where it needs to be installed.
Mitta
Vianetsintä
- Cannot pair/communicate: Ensure the sensor is connected to a Zigbee gateway; the manual notes it must be connected to successfully pair, communicate, and upload data.
- False triggers (unwanted detections): If the default settings cause false triggers, decrease the motion detection sensitivity. Also ensure there are no obstacles directly in front of the radar induction area and avoid mounting near moving/vibrating objects (e.g., air conditioners, electric fans, waving curtains).
- Static presence is not maintained: Increase the static detection sensitivity and set the Presence Keep Time to a longer duration (for configurations that support static presence).
- Weak wireless performance: Avoid building obstacles between the sensor and the Zigbee gateway, as thick concrete walls can significantly reduce transmission range.
Asiakirjat / Resurssit
 | Zigbee Occupancy Sensor |
Viitteet
- Käyttöopasmanual.tools