Cocoon offers a diverse range of products including smart security cameras, home automation devices, ethanol fireplaces, and travel accessories.
Koteloida is a versatile brand encompassing a range of consumer products across smart home security, lifestyle, and travel categories. The brand is widely recognized for Cocoon Products (Cocoon Connect), a leading provider of smart security solutions including High Definition wire-free cameras, DVR surveillance kits, and Wi-Fi-enabled home automation accessories. These products seamlessly integrate with the Cocoon Connect App for remote monitoring and control.
Beyond electronics, the brand includes Cocoon Fires, which designs elegant bio-ethanol fireplaces such as the hanging Aeris model, and Cocoon Innovations, famous for the GRID-IT!® gadget organizers. Whether you are setting up a smart security system or installing a designer fireplace, you can find the necessary user manuals, quick start guides, and technical specifications here.
Uusimmat käyttöohjeet manuals+ tälle tuotemerkille kuratoitu.
Katso tämän merkin asennus-, määritys- ja vianmääritysvideoita.
Yleisiä kysymyksiä tämän tuotemerkin käyttöoppaista, rekisteröinnistä ja tuesta.
To enter pairing mode, reset the camera by pressing and holding the reset button for approximately 10 seconds until the camera chimes. After about 15 seconds, the LED indicator should start flashing (usually blue or red) to indicate it is ready to pair via the app.
For most smart wireless cameras, download the 'Cocoon Connect' app from the iOS App Store or Google Play Store. For DVR security systems, you may need the 'Cocoon HD' app as specified in your product manual.
Ensure your mobile device is connected to a 2.4GHz Wi-Fi network, as most Cocoon cameras do not support 5GHz networks. Also, check that you have entered the correct Wi-Fi password during the setup process and that the camera is within good range of your router.
If the burner is overfilled, never ignite it. Remove the combustion chamber using the lifting handles, empty the excess fuel into a suitable container, and wipe off any spillage. Allow the residual fuel to evaporate for at least 1 hour before attempting to light it again.