hygger HG273

hygger 150W Submersible Aquarium Heater User Manual

Malli: HG273 | Merkki: hygger

Tärkeitä turvallisuusohjeita

Tuote loppuview

The hygger 150W Submersible Aquarium Heater (Model HG273) is designed to provide stable and consistent heating for 20-30 gallon freshwater or saltwater aquariums. It features a digital temperature controller for precise temperature management and includes advanced safety features such as overheat and out-of-water protection.

Tärkeimmät ominaisuudet:

Pakkauksen sisältö

Tekniset tiedot

AttribuuttiArvo
Mallin nimiHG273
Tehoa150W
Akvaarion koko20-30 gallonaa
Lämpötila-alue59-93°F (15-34°C)
Lämpötilan tarkkuus0.5 °F (0.5 °C)
Lämpötilan sieto± 1 ° F (± 1 ° C)
Heating Rod Size8.1 cm x 1.06 cm
VoitageAC 110-120V/60Hz (US Standard)
Johdon pituus2.6ft + 3.9ft / 0.8m + 1.2m
Tuotteen paino13.1 unssia
MateriaaliExplosion-proof Quartz Glass

Asennus

Follow these steps to properly install your hygger aquarium heater:

  1. Pura pakkauksesta: Carefully remove the heater and controller from the packaging. Inspect for any damage.
  2. Sijoitus: Position the heater fully submerged in your aquarium. It can be placed vertically or horizontally. Ensure the heater is at least 5cm below the water surface.
  3. Turvallinen: Use the included strong suction cups to firmly attach the heater to the inside wall of your tank.
  4. Ohjaimen sijoittelu: Place the digital temperature controller outside the aquarium in a dry location. Remember, the controller is not waterproof.
  5. Virtaliitäntä: Kun lämmitin on tukevasti paikallaan ja täysin upotettu veteen, kytke virtajohto sopivaan pistorasiaan.
Diagram showing correct vertical and horizontal placement of the hygger aquarium heater, emphasizing full submersion and keeping the controller dry.
Image: Proper placement of the hygger aquarium heater, illustrating both vertical and horizontal installation methods. Ensure the heater is fully submerged and the controller remains dry.
Close-up images highlighting the strong suction cups, water sensor for auto-shutoff, protective shell, and explosion-proof quartz sand glass features of the hygger aquarium heater.
Kuva: Yksityiskohtainen view of the heater's components, including suction cups for secure mounting, the water sensor for safety, the protective shell, and the explosion-proof quartz glass construction.

Käyttöohjeet

Your hygger aquarium heater is designed for easy operation with its external digital controller.

Lämpötilan asettaminen:

  1. Upon power connection, the controller will display the real-time water temperature.
  2. Press the "SET" button briefly to increase the preset temperature. Each press will cycle through the available temperature range (59-93°F).
  3. Once your desired temperature is displayed, stop pressing the "SET" button. The display will flash briefly and then return to showing the actual water temperature. The set temperature is now saved.

Merkkivalot:

Close-up of the digital temperature controller showing temperature setting, indicator lights, and instructions for setting the desired temperature.
Image: The external digital controller, illustrating how to set the desired temperature and the meaning of the red (heating) and green (standby) indicator lights.

Tuotevideo:

Video: An official product video demonstrating the features and operation of the hygger Small Aquarium Heater, including installation and temperature setting.

Huolto

Oikea huolto varmistaa lämmittimen pitkän käyttöiän ja tehokkaan toiminnan.

Vianetsintä

If you encounter issues with your hygger aquarium heater, refer to the following common problems and solutions:

Virhekoodi / OireKuvausRatkaisu
"ER" displayed on controllerHeater is out of water or water level is too low (dry-run protection activated).Ensure the heater is fully submerged in water. If the water level is low, add water to the tank. The heater will resume normal operation once fully submerged.
"EE" displayed on controllerWater temperature exceeds 97°F (overheat protection activated).Check the ambient room temperature. If the tank is in a warm environment, consider moving it or using a chiller. The heater will stop heating until the temperature drops below the safety threshold.
Lämmitin ei lämmitäThe red indicator light is off, and the water temperature is below the set point.Check if the heater is plugged in correctly. Verify the set temperature is higher than the current water temperature. Ensure there are no error codes displayed. If issues persist, contact customer support.
Image showing the hygger aquarium heater displaying 'Er' error code when partially out of water, demonstrating dry-run protection.
Image: The heater's controller displaying the "Er" error code, indicating that the heater is not fully submerged in water.
Image showing the hygger aquarium heater displaying 'EE' error code when water temperature exceeds 97°F, demonstrating overheat protection.
Image: The heater's controller displaying the "EE" error code, indicating that the water temperature has exceeded 97°F.

Takuu

Tässä hygger-akvaariolämmittimessä on 2 vuoden valmistajan takuu. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, or unauthorized repair.

Tukea

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact hygger customer support through the retailer where the product was purchased or visit the official hygger websivustolta yhteystiedot.