GDFStudio Täysikokoinen lattiasänky aidalla ja ovella - Käyttöohje

1. Johdanto

Thank you for choosing the GDFStudio Full Size Floor Platform Bed with Fence and Door. This manual provides detailed instructions for the assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Turvallisuustiedot

• Aikuisten kokoonpano vaaditaan: Aikuisten on koottava tämä tuote. Pidä lapset loitolla kokoamisen aikana.
• Lue ohjeet: Ensure all instructions are read and understood before assembly and use.
• Tarkista kaikki osat: Verify that all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Käyttö tasaisella alustalla: Assemble and use the bed on a flat, stable, and level surface to prevent tipping.
• Kiristä kiinnikkeet: Periodically check and tighten all fasteners to ensure the bed remains stable. Do not overtighten.
• Painorajoitus: Do not exceed the recommended weight limit for a full-size bed frame.
• Ei laatikkojousta tarvita: This platform bed is designed for use without a box spring. Using a box spring may raise the mattress height excessively.

3. Pakkauksen sisältö

Before assembly, please ensure all components listed below are present in your package. If any parts are missing or damaged, please contact customer support.

Image: Detailed diagram illustrating all components and their respective dimensions for the bed frame.

Komponenttiluettelo:

• Sängynpäädyn/jalkopäädyn paneelit
• Side Rails with Fence
• Ovilevy
• Tukilistat
• Keskimmäiset tukijalat (jos sovellettavissa)
• Tarvikepaketti (ruuvit, pultit, kuusiokoloavain)
• Käyttöohje

4. Asennus ja kokoonpano

Follow these steps carefully for a smooth assembly process. It is recommended to assemble the bed with two adults.

1. Pura komponentit: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (like a carpet) to prevent scratches.
2. Kokoa sivukaiteet: Attach the side rails to the headboard and footboard panels using the provided hardware. Ensure all connections are secure but do not fully tighten until the frame is complete.
3. Asenna ovi: Attach the door panel to the designated opening on the side rail using the hinges and latch provided. Ensure the door swings freely and latches securely.


Image: Detail of the door's hinge and latch for secure closure.

4. Tukilautojen asettaminen: Lay the wooden support slats across the bed frame. Ensure they are evenly spaced and secured to the side rails as per the instructions. These slats provide mattress support and eliminate the need for a box spring.


Kuva: View of the sturdy wooden slats providing mattress support.

5. Lopullinen kiristys: Once all parts are assembled, go back and fully tighten all screws and bolts. Do not overtighten to avoid damaging the wood.
6. Sängyn sijainti: Siirrä koottu sängynrunko varovasti haluttuun paikkaan.

5. Käyttöohjeet

This floor platform bed is designed for direct mattress placement. No box spring is required. The integrated fence and door provide a secure and enclosed sleeping area.

• Patjan sijoitus: Place your full-size mattress directly onto the wooden support slats.
• Oven toiminnallisuus: The small door allows for easy entry and exit. Ensure the latch is properly engaged when the door is closed to keep it secure.
• Low Profile Design: The low height of the bed makes it easily accessible.

Image: The assembled bed frame with a mattress and decorative items, showcasing sen matala-profile design and fence.

6. Huolto

• Puhdistus: Pyyhi puurunko pehmeällä, d:lläamp liinalla. Vältä voimakkaita kemikaaleja tai hankaavia puhdistusaineita, jotka voivat vahingoittaa pintaa.
• Säännöllinen tarkastus: Tarkista säännöllisesti kaikkien pulttien ja ruuvien kireys. Kiristä tarvittaessa.
• Vältä kosteutta: Keep the bed away from excessive moisture or direct sunlight to prevent warping or fading of the wood.

7. Vianmääritys

Yleisiä ongelmia ja ratkaisuja:

• Sänky tuntuu heiluvalta: Ensure all bolts and screws are fully tightened. Check that the bed is on a level surface.
• Slats are not fitting: Double-check that the side rails are correctly installed and that the slats are oriented properly.
• Ovi ei sulkeudu kunnolla: Inspect hinges and latch for any obstructions or misalignment. Adjust if needed.

8. Tekniset tiedot

9. Takuu ja tuki

GDFStudio products are manufactured with quality and care. For any questions regarding assembly, missing parts, or product defects, please contact GDFStudio customer support. Please have your model number (326331W) and purchase information ready when contacting support.

For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official GDFStudio websivusto.