1. Johdanto
This manual provides essential information for the safe and effective use of your Andeman EP-177 4000A Jump Starter with 150PSI Air Compressor. Please read all instructions carefully before operation and retain this manual for future reference.
Image 1.1: Andeman EP-177 Jump Starter with Air Compressor and included accessories.
2. Mitä laatikossa on
Varmista, että pakkauksessa on kaikki osat:
- Epower-177 Jump Starter x1
- Gas Needle x1
- Gas Nozzle x2
- Käyttöopas x1
- Jumper Cable x1
- Inflatable Tube x1
- Säilytyslaukku x1
- Latauskaapeli x1
Image 2.1: All items included in the Andeman EP-177 product package.
3. Tuotteen ominaisuudet
The Andeman EP-177 combines multiple functionalities for automotive and portable power needs:
- 4000A Peak Jump Starter: Capable of starting 12V vehicles with up to 8.5L gas or 7L diesel engines.
- 150PSI Air Compressor: Integrated portable inflator for tires, sports equipment, and other inflatables.
- 24000 mAh varavirtalähde: High-capacity battery with Type-C Quick Charge and USB-A/USB-B outputs for charging electronic devices.
- Monitilainen LED-valo: Features standard illumination, SOS, and alert modes for various situations.
- 10 turvasuojausta: Advanced safety features including overload, spark, reverse polarity, and over-temperature protection.
Image 3.1: The Andeman EP-177 functioning as both a jump starter and a tire inflator.
4. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Merkki | Andeman |
| Malli | Epower-177 |
| Huippulähtövirta | 4000 Amps |
| Akun kapasiteetti | 24000 mAh |
| Moottorien yhteensopivuus | Jopa 8.5 litraa bensiiniä / 7 litraa dieseliä |
| Ilmakompressorin paine | Jopa 150 PSI |
| Charging Input (Type-C) | 5V/3A, 9V/2A, 12V/1.5A |
| USB-A-lähtö | QC3.0 |
| USB-B-lähtö | 5V/3A |
| DC-lähtö | 15V |
| Tuotteen mitat | 1.97" S x 4.33" L x 7.68" K |
| Tuotteen paino | 2.86 kiloa |
| Akun tyyppi | Litium-ioni |
5. Asennus
5.1 Ensimmäinen lataus
Before first use, fully charge the Andeman EP-177. Connect the provided charging cable to the Type-C input port on the device and to a suitable USB power adapter (not included). The device supports fast charging, reaching full capacity in approximately 1.8 hours. A 10-minute charge can provide enough power for an emergency jump start.
Image 5.1: Charging the Andeman EP-177 via its Type-C port.
5.2 Akun tason tarkistaminen
The device features a digital display indicating the battery power percentage. Ensure the device is adequately charged before use, especially for jump-starting vehicles.
6. Käyttöohjeet
6.1 Ajoneuvon hyppykäynnistys
- Vaihe 1: Insert the jumper cable into the jump starter's port. Ensure a secure connection.
- Vaihe 2: Liitä punainen clamp ajoneuvon akun positiiviseen (+) napaan ja mustaan napaanamp ajoneuvon akun negatiiviseen (-) napaan.
- Vaihe 3: Once the green indicator light on the jumper cable connector illuminates, start the vehicle.
- Vaihe 4: Kun ajoneuvo on käynnistynyt, irrota hyppykaapeli clamps from the vehicle battery within 30 seconds, then disconnect the cable from the jump starter.
Image 6.1: Step-by-step guide for jump starting a vehicle.
6.2 Ilmakompressorin käyttö
- Vaihe 1: Press and hold the power button for 2 seconds to turn on the device. Short press to switch between on/pause.
- Vaihe 2: Choose the appropriate nozzle/needle and connect it to the inflatable tube, then attach to the item to be inflated.
- Vaihe 3: Short press the mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Use the "+" or "-" buttons to adjust the target pressure.
- Vaihe 4: Start inflation by short pressing the power button. The pump will stop automatically at the set pressure or when paused manually.
Huomautus: For continuous use, allow the compressor to rest for 10 minutes after every 10 minutes of operation to prevent overheating.
Image 6.2: The Andeman EP-177 functioning as a tire inflator.
6.3 Käyttö varavirtalähteenä
The device can charge various electronic devices via its USB-A (QC3.0), USB-B (5V/3A), and Type-C (5V/3A, 9V/2A, 12V/1.5A) output ports. Connect your device using a compatible charging cable.
Image 6.3: The Andeman EP-177 used as a power bank to charge various devices.
6.4 LED-taskulampun käyttö
The integrated LED light offers three modes:
- Standard Lighting: Tarjoaa jatkuvaa valaistusta.
- SOS-tila: Emits an SOS signal for emergency situations.
- Varoitustila: Flashing light for increased visibility.
To activate or cycle through modes, press the dedicated flashlight button on the device.
Image 6.4: The Andeman EP-177's LED flashlight in use.
7. Turvaohjeet
Noudata seuraavia turvallisuusohjeita välttääksesi loukkaantumiset tai laitteen vaurioitumisen:
- Do not short-circuit the jump starter terminals.
- Älä altista laitetta äärimmäisille lämpötiloille (alle -20 °C tai yli 60 °C).
- Älä pura laitetta.
- Pidä poissa lasten ulottuvilta.
- Varmista oikea napaisuus kytkettäessä ajoneuvon akkuun (punainen positiiviseen, musta negatiiviseen).
- Remove jumper cables within 30 seconds after the vehicle starts.
- Avoid prolonged continuous use of the air compressor to prevent overheating.
Kuva 7.1: ohiview kymmenestä turvatoimenpiteestä.
8. Huolto
- Säilytä laitetta viileässä, kuivassa paikassa suojassa suoralta auringonvalolta.
- Charge the device at least once every 3-6 months to maintain battery health, even if not in use.
- Puhdista ulkopinta pehmeällä, damp kangas. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
- Varmista, että kaikki portit ovat pölyttömiä ja puhtaita.
9. Vianmääritys
- Laite ei käynnisty:
- Ensure the device is charged. Connect it to a power source and allow it to charge for a period.
- Auto ei käynnisty apukäynnistyksen jälkeen:
- Check battery connections for proper polarity and secure contact. Ensure the jump starter has sufficient charge. The vehicle battery may be severely damaged or the vehicle may have other mechanical issues.
- Air compressor is not inflating:
- Verify that the nozzle is correctly attached and the target pressure is set. Check the device's battery level. Ensure the power button has been pressed to start inflation.
- Device is overheating:
- Stop operation immediately and allow the device to cool down. This is particularly important for the air compressor after extended use.
10. Takuu ja tuki
For warranty information and customer support, please refer to the contact details provided in your product packaging or visit the official Andeman websivusto. Säilytä ostokuitti ostotodistuksena takuuvaatimuksia varten.
