TRU COMPONENTS Signal Pillar TC-12835336 Käyttöohje

1. Johdanto

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the TRU COMPONENTS Signal Pillar, model TC-12835336. This device is designed for industrial signaling applications, featuring red and green LED indicators with continuous or flashing light modes and an IP65 protection rating.

2. Turvallisuustiedot

• Lue kaikki ohjeet huolellisesti ennen asennusta ja käyttöä.
• Asennuksen saa suorittaa vain pätevä henkilöstö.
• Varmista, että virtalähde on irrotettu ennen asennus-, huolto- tai vianetsintätoimenpiteitä.
• Tarkista oikea tilavuustage (24V) is supplied to prevent damage to the unit.
• Do not expose the device to conditions beyond its specified IP65 rating.
• Vältä suoraa LED-valolle altistumista silmille pitkiä aikoja.

3. Tuote ohiview

The TRU COMPONENTS Signal Pillar TC-12835336 is a robust signaling device with two LED segments (red and green) for clear visual indication in various industrial environments.

Kuva 1: TRU COMPONENTS Signal Pillar TC-12835336. This image displays the signal pillar with its black base, threaded mounting shaft, and two translucent LED segments: red on top and green below. A bundle of multi-colored wires extends from the base for electrical connection.

Komponentit:

• LED-segmentit: Red and Green, providing visual status.
• Asuminen: Durable black housing with a diameter of 55 mm.
• Asennuslanka: Turvallista asennusta varten.
• Johtosarja: Multi-colored wires for power and control connections.

4. Tekniset tiedot

5. Asennus ja asennus

1. Virran katkaisu: Ensure all power to the installation area is disconnected before beginning.
2. Asennus: Securely mount the signal pillar using its threaded base. Ensure the mounting surface is stable and capable of supporting the device.
3. Johdotus: Connect the signal pillar's wires to the appropriate 24V power supply and control system. Refer to the wiring diagram (if provided separately with the product) for specific connections for continuous or flashing modes. Typically, different wires control each LED segment and the flashing function.
4. Ympäristösinetti: Ensure the IP65 rating is maintained after installation by properly sealing all connections and mounting points, especially in environments where dust or water ingress is a concern.
5. Virtaliitäntä: Once all connections are secure and verified, restore power to the system.

6. Käyttöohjeet

The TRU COMPONENTS Signal Pillar operates by receiving a 24V signal to illuminate its LED segments. The specific wiring configuration determines whether a segment illuminates continuously or flashes.

• Jatkuva valaistus: Apply 24V to the designated wire for the desired LED segment (e.g., red or green) to achieve continuous illumination.
• Flashing Lighting: If wired for flashing operation, applying 24V to the corresponding wire will activate the flashing mode for that LED segment. Consult your system's wiring diagram for specific control signals.
• Multiple Segments: Both red and green segments can be activated independently or simultaneously, depending on the control system's design.

7. Huolto

The TRU COMPONENTS Signal Pillar is designed for low maintenance. Regular checks can ensure optimal performance.

• Puhdistus: Periodically clean the exterior of the signal pillar with a soft, damp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Tarkastus: Regularly inspect the housing and wiring for any signs of damage, wear, or loose connections.
• Tiivisteen eheys: For IP65 rated protection, ensure all seals and cable glands remain intact and properly tightened.
• Virran katkaisu: Katkaise aina virta ennen huoltotoimenpiteitä.

8. Vianmääritys

Jos vianmääritysohjeet eivät ratkaise ongelmaa, ota yhteyttä asiakastukeen tai pätevään teknikkoon.

9. Takuu ja tuki

For information regarding warranty coverage, technical support, or replacement parts, please refer to the documentation provided with your purchase or contact TRU COMPONENTS customer service. Keep your purchase receipt as proof of purchase.

Manufacturer: TRU COMPONENTS