1. Johdanto
The SINOTIMER 12V Digital Timer Switch is a versatile, programmable device designed for precise control of electrical circuits. It features 7-day programming capabilities, allowing for up to 28 ON/OFF events per day. This timer is suitable for various applications powered by DC, AC, or solar battery systems, providing accurate-to-the-second control for automated operations.
Kuva 1.1: Edessä view of the SINOTIMER 12V Digital Timer Switch, showing the digital display and control buttons.
2. Pakkauksen sisältö
Varmista, että pakkauksessasi on kaikki alla luetellut tuotteet:
- 1 x Timer Unit
- 1 x kiinnike
- 1 x käyttöohje
- 1 x pölysuoja
- 1 x Internal Battery (pre-installed or separate)
- 1 x Purkamistyökalu
- 2 x ruuvit
- 5 x Liitosjohtoa
Image 2.1: An image displaying the contents of the SINOTIMER 12V Digital Timer Switch package, including the timer unit, mounting bracket, manual, dust cover, battery, disassembly tool, screws, and connecting wires.
3. Tuotteen ominaisuudet
The SINOTIMER Digital Timer Switch offers the following key features:
- 7 päivän ohjelmoitavuus: Schedule events for individual days or blocks of days.
- High Event Capacity: Up to 28 ON/OFF events can be programmed per day.
- LED -virran merkkivalo: Provides visual confirmation of power status.
- Internal Battery Backup: Säilyttää ohjelmoidut asetukset virrankatkaisun aikanatages.
- Aikamuotovaihtoehdot: Supports both 12-hour and 24-hour display formats.
- Spade Connecting Wires: Includes 5 spade-type connecting wires for installation.
- Suuri kuormituskapasiteetti: Designed to handle significant electrical loads.
- Stable and Precise Operation: Ensures reliable and accurate timing.
- Smart Chip -tekniikka: Enhances performance and functionality.
- Pölytiivis muotoilu: Provides protection against dust ingress.
- High Definition Digital Display: Selkeä ja helposti luettava näyttö.
Image 3.1: An image illustrating key features of the SINOTIMER 12V Digital Timer Switch, such as high load capacity, stable and precise operation, smart chip technology, dustproof design, multiple switch settings, and a high-definition LED digital display.
4. Tekniset tiedot
| Attribuutti | Arvo |
|---|---|
| Merkki | SINOTIMER |
| Malli | TM-619 |
| Materiaali | Muovi |
| Tuotteen mitat | 1.77"S x 2.83"L x 2.83"K (45 mm S x 72 mm L x 72 mm K) |
| Tuotteen paino | 4.6 unssia (0.29 puntaa) |
| Asetusten määrä | 28 (ON/OFF events per day) |
| Näytön koko | 2 tuumaa |
| Virransyöttö | 12V DC/AC |
| Yhteydenottoluokitus | 10 A, 250 V AC; 10 A, 30 V DC |
Image 4.1: Technical drawing showing the dimensions (62mm x 62mm x 37.5mm) and the 5-spade terminal layout of the SINOTIMER Digital Timer Switch.
5. Asennus ja asennus
Turvallisuusvaroitus: Installation should be performed by a qualified individual. Ensure power is disconnected before wiring to prevent electric shock.
5.1 Kytkentäohjeet
The timer features 5 spade terminals for input power and output control. Refer to the wiring diagram below for correct connections.
Image 5.1: A diagram illustrating the wiring connections for the SINOTIMER TM-619 timer, showing input power (Line of fire, Zero line) and output connections (NO, NC).
- Terminaalit 1 ja 2: Input power (12V DC/AC). Connect your power source here.
- Terminaali 3: Common (COM) for the relay output.
- Terminaali 4: Normally Open (NO) contact. The circuit is closed when the timer is ON.
- Terminaali 5: Normally Closed (NC) contact. The circuit is open when the timer is ON.
Use the provided spade connecting wires to ensure secure connections. An example of connected wires is shown below.
Image 5.2: An image showing the SINOTIMER digital timer switch with blue spade connectors attached to its terminals, demonstrating a typical wiring connection.
5.2 Asennus
The timer is designed for panel installation. Use the included mounting bracket and screws to secure the unit in place. Ensure adequate ventilation around the timer.
6. Käyttöohjeet
6.1 Nykyisen ajan asettaminen
- Paina KELLO -painiketta.
- Pitämällä KELLO, paina PÄIVÄ asettaaksesi nykyisen viikonpäivän.
- Pitämällä KELLO, paina TUNNIN asettaaksesi nykyisen tunnin.
- Pitämällä KELLO, paina MIN asettaaksesi nykyisen minuutin.
- Vapauta KELLO -painiketta. Aika on nyt asetettu.
6.2 PÄÄLLE/POIS-tapahtumien ohjelmointi
The timer allows for up to 28 ON/OFF programs. Follow these steps to set a program:
- Paina AJASTIN -painiketta kerran. Näytössä näkyy "1 ON".
- Paina PÄIVÄ to select the day(s) for this ON event. You can choose individual days, blocks of days (e.g., Mon-Fri), or all 7 days.
- Paina TUNNIN to set the desired hour for the ON event.
- Paina MIN to set the desired minute for the ON event.
- Paina AJASTIN uudelleen. Näytössä näkyy "1 OFF".
- Repeat steps 2-4 to set the day(s), hour, and minute for the corresponding OFF event.
- Jatka painamista AJASTIN to cycle through "2 ON", "2 OFF", and so on, up to "28 OFF", setting each program as needed.
- Kun olet asettanut kaikki haluamasi ohjelmat, paina KELLO -painiketta palataksesi nykyisen ajan näyttöön.
Voit poistaa ohjelman painamalla R (Nollaus) -painiketta painettuna viewing the specific ON or OFF program you wish to clear. This will set the time to "--:--".
6.3 Manuaalisen tilan käyttö
The MANUAALINEN button allows you to override programmed settings temporarily:
- Paina MANUAALINEN toistuvasti vaihtaaksesi tiloja: ON (aina päällä), AUTO (noudattaa ohjelmoitua aikataulua), POIS (aina pois päältä).
- Valitse AUTO for the timer to execute your programmed schedules.
6.4 12/24 tunnin muoto
Voit vaihtaa 12 tunnin (AM/PM) ja 24 tunnin muotojen välillä painamalla TUNNIN -painiketta pitäen samalla painettuna KELLO -painiketta.
7. Huolto
7.1 Pariston vaihto
The timer includes an internal battery for backup power to retain settings. If the display becomes dim or settings are lost frequently, the battery may need replacement.
Image 7.1: An image of the SINOTIMER digital timer switch's rear panel, highlighting the battery compartment which indicates the battery can be replaced.
- Ensure the timer is disconnected from all power sources.
- Paikanna paristolokero laitteen takana.
- Carefully open the compartment using the provided disassembly tool or a small screwdriver.
- Remove the old button-cell battery. Note its orientation.
- Insert a new, compatible button-cell battery (e.g., CR2032) with the correct polarity.
- Sulje paristolokero kunnolla.
- Reconnect power and reset the current time and programs if necessary.
8. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| No display / Unit is dead | No power supply; faulty wiring; dead internal battery. | Check power connections (Terminals 1 & 2). Verify power source. Ensure wiring is correct. Replace internal battery if necessary. |
| Ohjelmat eivät suoritu | Timer is in MANUAL ON/OFF mode; incorrect program settings; current time is wrong. | Paina MANUAALINEN kunnes näytössä näkyy "AUTO". Uudelleenview program settings for correct ON/OFF times and days. Verify current time is set accurately. |
| Output always ON/OFF | Timer is in MANUAL ON/OFF mode; relay malfunction. | Switch to "AUTO" mode using the MANUAALINEN button. If the issue persists, the relay may be faulty and require professional inspection or replacement. |
| Asetukset katoavat virrankatkaisun jälkeentage | Sisäinen akku on tyhjä tai viallinen. | Replace the internal button-cell battery as described in Section 7.1. |
9. Takuu ja tuki
This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support or warranty claims, please contact SINOTIMER customer service through their official websivusto tai jälleenmyyjä, josta tuote ostettiin.
Lisäapua varten käy osoitteessa SINOTIMER Store on Amazon.