1. Tuote ohiview
The MiBOXER Y3 RGB+CCT Vertical Remote provides comprehensive control over compatible RGB+CCT LED lighting systems. This remote allows for precise adjustments of RGB colors, color temperature (CCT), and brightness. Utilizing 2.4GHz wireless technology, it ensures reliable communication with your lighting devices. Its ergonomic vertical design and intuitive interface are designed for ease of use, enabling users to effortlessly customize lighting for various environments.
Tärkeimmät ominaisuudet:
- RGB, CCT, and Brightness Control: Adjust colors, color temperature, and brightness with ease.
- 2.4 GHz:n langaton tekniikka: Ensures reliable, long-range connectivity.
- Vertical Design: Ergonomic and easy-to-use layout for quick adjustments.
- Multi-Color and Dimmable: Create customized lighting scenes with vibrant colors and dimming options.
- Monipuolinen yhteensopivuus: Works with MiBOXER RGB+CCT lighting products.
Figure 1: MiBOXER Y3 RGB+CCT Vertical Remote with its retail packaging.
2. Asennusohjeet
2.1 Akun asennus
The MiBOXER Y3 remote requires two AAA batteries (not included). To install:
- Paikanna kaukosäätimen takaosassa oleva paristolokeron kansi.
- Avaa liu'uttamalla kantta alaspäin.
- Aseta kaksi AAA-paristoa paikoilleen varmistaen oikean napaisuuden (+ ja -).
- Liu'uta kansi takaisin paikalleen, kunnes se napsahtaa tukevasti.
2.2 Linking the Remote to Lighting Devices
To control your MiBOXER RGB+CCT lighting devices, the remote must be linked to them. This process typically involves a specific sequence of actions on both the remote and the lighting device. Refer to your specific MiBOXER lighting product's manual for detailed linking instructions, as the procedure may vary slightly between different light models. A common linking procedure is as follows:
- Ensure the lighting device is powered off.
- Power on the lighting device.
- Within 3 seconds of powering on the light, press the "Zone ON" button (labeled "I" or "1") on the remote for the desired zone.
- Valon pitäisi vilkkua useita kertoja onnistuneen linkityksen merkiksi.
- If linking fails, repeat the process.
To unlink a device from a zone, power on the light and within 3 seconds, press the "Zone ON" button (labeled "I" or "1") five times rapidly for the corresponding zone. The light should flash multiple times to confirm unlinking.
3. Käyttöohjeet
The MiBOXER Y3 remote features an intuitive layout for controlling various lighting parameters. Familiarize yourself with the buttons and sliders as shown in Figure 2.
Figure 2: MiBOXER Y3 Remote Control button layout and functions.
3.1 Painikkeiden toiminnot:
| Painike/ohjain | Toiminto |
|---|---|
| Merkkivalo | Flashes to confirm button presses. |
| RGB liukusäädin | Slide to select desired RGB color. |
| Kirkkauden liukusäädin | Slide to adjust light brightness (0-100%). |
| Master ON (I/ON) | Sytyttää kaikki linkitetyt valot. |
| Master OFF (O/OFF) | Sammuttaa kaikki linkitetyt valot. |
| White Light (W) | Aktivoi puhtaan valkoisen valon tilan. |
| Speed-/CCT-/Saturation- | Decreases speed in dynamic mode, decreases color temperature (warmer white), or decreases color saturation. |
| Speed+/CCT+/Saturation+ | Increases speed in dynamic mode, increases color temperature (cooler white), or increases color saturation. |
| Dynamic Mode (M) | Cycles through various dynamic lighting effects. Press repeatedly to change effects. |
| Zone ON (1, 2, 3 - "I") | Turns ON lights linked to the specific zone. Used for linking/unlinking. |
| Zone OFF (1, 2, 3 - "O") | Turns OFF lights linked to the specific zone. |
3.2 Yleinen käyttö:
- Valojen kytkeminen päälle/pois: Use the "Master ON" or "Master OFF" buttons for all lights, or "Zone ON" / "Zone OFF" for specific zones.
- Adjusting Color: Slide your finger along the "RGB Slider" to select your desired color.
- Kirkkauden säätö: Slide your finger along the "Brightness Slider" to increase or decrease the light intensity.
- Värilämpötilan (CCT) säätäminen: In white light mode, use the "CCT-" and "CCT+" buttons to make the white light warmer or cooler.
- Dynaamiset tilat: Press the "M" button to activate dynamic lighting modes. Use "Speed-" and "Speed+" to adjust the speed of the current dynamic effect.
- Kylläisyyden säätö: In RGB mode, use "Saturation-" and "Saturation+" to adjust the intensity of the color.
4. Huolto
Proper maintenance ensures the longevity and optimal performance of your MiBOXER Y3 remote.
- Puhdistus: Wipe the remote with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.
- Akun vaihto: Replace batteries when the indicator light becomes dim or the remote's response becomes inconsistent. Always use new AAA batteries and dispose of old batteries responsibly.
- Varastointi: Säilytä kaukosäädintä viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista. Jos säilytät kaukosäädintä pitkään, poista paristot vuotojen estämiseksi.
- Vältä kosteutta: This remote is not waterproof. Keep it away from water and high humidity environments.
5. Vianmääritys
If you encounter issues with your MiBOXER Y3 remote, refer to the following troubleshooting steps:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Remote not responding to button presses. | Tyhjät tai vähissä akut. Kaukosäädintä ei ole yhdistetty valoihin. Alueen ulkopuolella. | Vaihda paristot. Re-link the remote to the lighting devices (refer to Section 2.2). Move closer to the lighting devices. |
| Valot eivät muuta väriä/kirkkautta. | Väärä tila valittu. Remote not linked to the specific zone. | Ensure you are in the correct mode (e.g., RGB for color, CCT for white temperature). Verify the remote is linked to the correct zone. |
| Indicator light not flashing. | Tyhjät akut. Sisäinen vika. | Vaihda paristot. Jos ongelma jatkuu akun vaihtamisen jälkeen, ota yhteyttä asiakastukeen. |
| Interference with other 2.4GHz devices. | Etäisyys muihin langattomiin laitteisiin. | Move the remote or other 2.4GHz devices further apart. |
6. Tekniset tiedot
Technical specifications for the MiBOXER Y3 RGB+CCT Vertical Remote.
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallinumero | Y3 |
| Merkki | MiBOXER |
| Ohjaustyyppi | RGB+CCT Vertical Remote |
| Langaton tekniikka | 2.4 GHz |
| Virtalähde | 2x AAA-paristot (ei mukana) |
| Erikoisominaisuus | RGB/CCT/brightness dimmable |
| Tuotteen paino | 4.8 unssia (noin 136 grammaa) |
| Pakkauksen mitat | 6.5 x 3 x 2 tuumaa (noin 16.5 x 7.6 x 5.1 cm) |
Figure 3: Dimensions of the MiBOXER Y3 Remote Control and its packaging.
7. Takuu ja tuki
For warranty information, please refer to the documentation provided with your specific MiBOXER lighting product or contact the retailer where the product was purchased. MiBOXER products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support or further assistance, please visit the official MiBOXER website or contact their customer service department. Contact details are usually available on the product packaging or the brand's official online presence.
