TCP Economy LED UFO High Bay Luminaire User Manual

1. Johdanto

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your TCP Economy LED UFO High Bay Luminaire. Please read this manual thoroughly before installation and retain it for future reference.

The TCP Economy LED UFO High Bay Luminaire is designed for commercial and industrial applications, offering high efficacy and a long operational lifespan. It features a robust design suitable for various environments, including warehouses, retail spaces, and gymnasiums.

Kuva 1: Etuosa view of the TCP Economy LED UFO High Bay Luminaire, showing the LED array and clear lens.

2. Turvallisuustiedot

• Sähköturvallisuus: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Always disconnect power at the circuit breaker before installing, servicing, or cleaning the fixture.
• Maadoitus: Varmista, että valaisin on maadoitettu asianmukaisesti sähköiskun välttämiseksi.
• Käsittely: Do not handle the fixture with wet hands. Avoid touching the LED array directly.
• Toimintaympäristö: This luminaire is rated IP65 for outdoor use and protection against dust and water jets. Do not submerge the fixture in water. Ensure the operating temperature is within the specified range.
• Asennus: The mounting structure must be capable of supporting the weight of the fixture.
• Muutokset: Do not attempt to modify or disassemble the fixture. This will void the warranty and may create safety hazards.

3. Pakkauksen sisältö

Pura pakkaus pakkauksesta ja varmista, että kaikki osat ovat mukana ja vahingoittumattomia. Pakkauksen tulee sisältää:

• 1 x TCP Economy LED UFO High Bay Luminaire
• 1 x Eyebolt for suspended mounting

Note: Additional mounting hardware (e.g., chains, hooks) may be required and is sold separately.

4. Tekniset tiedot

Figure 2: Approximate dimensions of the luminaire, including height with eyebolt and diameter.

5. Asennusohjeet (asetus)

This luminaire is designed for suspended mounting. Follow these steps for proper installation:

1. Turvallisuus ennen kaikkea: Ensure power to the installation area is turned OFF at the circuit breaker before beginning any work.
2. Tarkasta kiinnitys: Carefully remove the luminaire from its packaging and inspect for any damage. Do not install if damaged.
3. Prepare Mounting Point: Identify a suitable structural mounting point capable of safely supporting the luminaire's weight (6.44 lbs). Install appropriate mounting hardware (e.g., chain, hook) if not already present.
4. Attach Eyebolt: Securely thread the provided eyebolt into the top of the luminaire housing.
5. Suspend Fixture: Carefully lift the luminaire and attach the eyebolt to your chosen mounting hardware. Ensure the fixture is stable and level.
6. Johdotus:
   • Open the wiring compartment on the top of the fixture.
   • Connect the AC input wires (Line, Neutral, Ground) from your power supply to the corresponding wires on the luminaire. Refer to local electrical codes for proper wiring practices.
   • For 0-10V dimming functionality, connect the purple (DIM+) and gray (DIM-) wires from your 0-10V dimmer to the corresponding dimming wires on the luminaire. If dimming is not desired, cap these wires individually.
   • Varmista, että kaikki liitännät ovat turvallisia ja eristettyjä.
7. Sulje lokero: Sulje johtokotelon kansi tiiviisti.
8. Palauta virta: Kun asennus on valmis ja kaikki liitännät on tarkistettu, kytke virta takaisin sulakkeesta.

Kuva 3: Yläosa view of the luminaire, illustrating the eyebolt for suspension and the location of the wiring compartment.

6. Käyttö

The TCP Economy LED UFO High Bay Luminaire operates immediately upon receiving power.

• Virta päälle/pois: Control the luminaire's power supply via the connected wall switch or circuit breaker.
• himmennys: If connected to a compatible 0-10V dimmer, adjust the light output by manipulating the dimmer control. The luminaire will respond to the 0-10V signal to vary its brightness.

7. Huolto

The TCP Economy LED UFO High Bay Luminaire requires minimal maintenance.

• Puhdistus: Ensure power is disconnected before cleaning. Use a soft, damp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or optical components.
• Tarkastus: Periodically inspect the fixture and its mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
• Ei käyttäjän huollettavia osia: There are no user-serviceable parts inside the luminaire. Do not attempt to open or repair the unit.

8. Vianmääritys

If the luminaire is not functioning as expected, perform the following basic checks:

• Ei valoa:
  • Verify that the power supply to the fixture is active at the circuit breaker and wall switch.
  • Check all wiring connections for proper contact and insulation.
• Himmennys ei toimi:
  • Ensure the 0-10V dimmer is compatible and correctly wired to the luminaire's dimming leads (purple and gray).
  • Verify the dimmer is functioning correctly.
• Vilkkuminen:
  • Tarkista löysät johtoliitännät.
  • Varmista, että syöttötilavuustage on vakaa ja määritellyn alueen sisällä.

If these steps do not resolve the issue, contact customer support for assistance. Do not attempt further repairs yourself.

9. Takuu ja tuki

This TCP Economy LED UFO High Bay Luminaire is covered by a Viiden vuoden rajoitettu takuu against defects in manufacturing. Please retain your proof of purchase for warranty claims.

Figure 4: Warranty statement and product listings (UL and cUL listed, IP65 Rated).

For technical support, warranty inquiries, or replacement parts, please contact TCP customer service:

• Websivusto: www.tcpi.com
• Puhelin: Refer to TCP's official websivustolta ajankohtaiset yhteystiedot.