AZDOME M01 Pro Dual -kojelautakameran käyttöohje

1. Pakkauksen sisältö

Tarkista pakkauksen sisältö varmistaaksesi, että kaikki osat ovat mukana ja hyvässä kunnossa.

• AZDOME M01 Pro Dual Dash Cam (Front Unit)
• Takakamera
• 128GB SD-kortti
• Mini USB OBD Hardwire Kit
• Imukuppikiinnitys
• Liimakiinnike
• USB-virtakaapeli
• Pry-työkalu
• Käyttöopas

Image 1.1: All components included in the AZDOME M01 Pro Dual Dash Cam package.

2. Asennus

2.1 SD-kortin asettaminen

Locate the SD card slot on the side of the main dash cam unit. Gently insert the provided 128GB micro SD card until it clicks into place. Ensure the card is inserted correctly to avoid damage.

Image 2.1: The included 128GB micro SD card for video storage.

2.2 Etukameran kiinnittäminen

1. Puhdista tuulilasin alue, johon aiot asentaa kojelautakameran. Varmista, että se on pölytön ja rasvaton.
2. Attach the suction cup mount or adhesive mount to the main dash cam unit.
3. Press the mount firmly against the windshield and secure it. Adjust the angle to ensure a clear view edessä olevasta tiestä.

Image 2.2: Front dash cam mounted on the windshield using the suction cup mount.

2.3 Takakameran asentaminen

1. Etsi takalasista sopiva paikka peruutuskameralle ja varmista, että näkyvyys on selkeä. view.
2. Puhdista valittu alue huolellisesti.
3. Attach the rear camera using its adhesive backing.
4. Connect the rear camera cable to the main dash cam unit. Route the cable discreetly along the vehicle's headliner and A-pillar using the provided pry tool to tuck it under trim panels.

2.4 Virran kytkeminen

The AZDOME M01 Pro comes with a Mini USB OBD Hardwire Kit for continuous power and parking mode functionality.

1. Paikanna ajoneuvosi OBD-II-portti (yleensä kojelaudan alla kuljettajan puolella).
2. Plug the OBD connector of the hardwire kit into the vehicle's OBD-II port.
3. Connect the Mini USB end of the hardwire kit to the main dash cam unit.
4. Route the power cable discreetly, similar to the rear camera cable, to avoid obstructing your view tai häiritsee ajamista.

Image 2.3: The Mini USB OBD Hardwire Kit for power connection.

Image 2.4: Key benefits of using the OBD Hardwire Kit, including 24H parking monitoring and easy installation.

3. Käyttöohjeet

3.1 Virran kytkeminen päälle/pois

The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on (if connected via OBD hardwire kit). It will power off automatically when the ignition is turned off.

3.2 Perusohjaimet

The dash cam features a 3-inch 2.5D curved IPS screen and intuitive buttons for navigation and control. Refer to the on-screen interface for specific menu options.

3.3 Silmukkanauhoitus

The dash cam continuously records video in short segments (e.g., 1, 3, or 5 minutes). When the SD card is full, the oldest unlocked video fileUudet tallenteet korvaavat automaattisesti vanhat tiedostot. Tämä varmistaa jatkuvan tallennuksen ilman manuaalisia toimia.

3.4 G-anturi ja hätälukitus

The built-in G-sensor detects sudden movements or impacts (e.g., collisions). When an event is detected, the current video segment is automatically locked and saved to a protected folder, preventing it from being overwritten by loop recording.

3.5 24H Parking Mode

With the Mini USB OBD Hardwire Kit, the dash cam supports 24-hour parking monitoring. There are two primary modes:

• Törmäyksentunnistuksen pysäköintitila: The G-sensor detects impacts while parked and records a short video segment.
• Aikaviivepysäköintitila: Kojelautakamera tallentaa jatkuvasti alhaisella kuvataajuudella (esim. 1 fps) 24 tunnin ajan pakkaamalla pitkät jaksot lyhyiksi videoiksi.

Image 3.1: Explanation of 24H Parking Monitoring modes: Collision Detection and Time-Lapse recording.

3.6 ADAS (Kuljettajan avustusjärjestelmät)

The M01 Pro features ADAS functions, including a Lane Departure Warning System and Forward Collision Warning. These systems provide timely alerts to help reduce the risk of driving accidents.

3.7 Dual Recording & Reverse View

The dash cam records simultaneously from both the front (Full HD 1080P, 150° wide-angle) and rear (120° wide-angle) cameras. The display can show both views, and when reversing, it can provide a reverse view pysäköintiohjeiden kanssa.

Image 3.2: Dual recording display showing front and rear views, with reverse view parking guidelines.

3.8 Superyönäkö

Equipped with a Starvis Sensor and F2.0 large aperture, the dash cam provides enhanced night vision capabilities, capturing clear footage jopa heikossa valaistuksessa.

Image 3.3: Super Night Vision technology details, including 6-Glass Lens, Starvis Sensor, and F2.0 Aperture for clear low-light recording.

4. Huolto

4.1 SD-kortin hallinta

Regularly format your SD card (at least once a month) to maintain optimal performance and prevent data corruption. Back up any important video files ennen alustusta.

4.2 Puhdistus

Use a soft, dry cloth to clean the dash cam lenses and screen. Avoid using abrasive cleaners or solvents that could damage the device.

5. Vianmääritys

• Kojelautakamera ei käynnisty: Ensure the OBD hardwire kit is correctly installed and receiving power from the vehicle. Check the Mini USB connection to the dash cam.
• Tallennusongelmat: Verify the SD card is properly inserted and not full. Format the SD card if necessary. Ensure loop recording is enabled.
• Huono videon laatu: Clean the camera lenses. Check the resolution settings in the menu. Ensure the protective film has been removed from the lenses.
• Takakamera ei näy: Check the cable connection between the front and rear cameras. Ensure the rear camera is properly installed.
• Pysäköintitila ei toimi: Confirm the OBD hardwire kit is correctly installed and providing continuous power. Check parking mode settings in the menu.

6. Tekniset tiedot

7. Takuu ja tuki

Takuutietoja tai teknistä tukea varten katso AZDOME:n virallinen verkkosivusto. website or contact their customer service directly. Contact details are typically found in the packaging or on the product's official support page.