Johdanto
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Feit Electric Wi-Fi Smart Dimmer Light Switch. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: The product packaging for the Feit Electric Smart Dimmers, highlighting key features such as Wi-Fi connectivity, remote access, voice control, and scheduling. It also states the requirement for a neutral wire.
Asennus ja asennus
Turvallisuusohjeet
- Always turn off power at the circuit breaker before beginning any electrical work.
- Jos olet epävarma jostakin asennusprosessin osasta, ota yhteyttä pätevään sähköasentajaan.
- Ensure your electrical box has a neutral wire. This dimmer switch requires a neutral wire for operation.
Identifying a Neutral Wire
Before installation, verify the presence of a neutral wire in your switch box. A neutral wire is typically white. If no neutral wire is present, this dimmer switch will not function.
Image: A diagram illustrating how to identify a neutral wire (white wire) within a standard electrical switch box. It shows the dimmer switch connected to line, load, ground, and neutral wires.
Johdotusohjeet
The Feit Electric Smart Dimmer supports both single-pole and 3-way wiring configurations. Refer to the diagrams below for appropriate connections.
Image: Diagrams illustrating various wiring configurations for the smart dimmer, including single dimmer, two dimmers, switch and dimmer, and multiple dimmers, along with multi-gang installation examples.
- Katkaise virta katkaisijasta.
- Irrota olemassa oleva seinälevy ja kytkin.
- Identify the Line, Load, Neutral, and Ground wires.
- Connect the wires from the Feit Electric Smart Dimmer to the corresponding wires in your electrical box using wire nuts.
- Carefully push the wires back into the electrical box and secure the dimmer switch with screws.
- Kiinnitä uusi seinälevy.
- Palauta virta katkaisijaan.
Wi-Fi-pariliitos
After installation, pair your dimmer switch with the Feit Electric app for smart control. The switch operates on a 2.4GHz Wi-Fi network.
- Download the Feit Electric app from your device's app store.
- Luo tili tai kirjaudu sisään.
- Follow the in-app instructions to add a new device. The power indicator light on the dimmer will blink during pairing mode.
Käyttöohjeet
Manuaalinen ohjaus
Image: A detailed diagram of the Feit Electric Smart Dimmer switch, labeling the Power ON/OFF Switch, Dim (+) and Dim (-) buttons, Air Gap Switch, Light Level Indicator Lights, and Power Indicator Light.
- Virtakytkin: Press the main button to turn lights on or off.
- Dim (+) / Brighten Lights: Press the upper side button to increase brightness. Hold for 2 seconds for stepless dimming.
- Dim (-) / Lower Lights: Press the lower side button to decrease brightness. Hold for 2 seconds for stepless dimming.
- Light Level Indicator Lights: Five LEDs indicate the selected brightness level (LED 1: 1%-20%, LED 2: 21%-40%, LED 3: 41%-60%, LED 4: 61%-80%, LED 5: 81%-100%).
- Virran merkkivalo: Blinks during pairing mode (lasts three minutes). Solid light indicates the unit is paired or after 3 minutes if no Wi-Fi connection.
- Ilmaraon kytkin: Pull out the small tab at the bottom to completely cut power to the light fixture for bulb replacement or maintenance.
Älykkäät ohjausominaisuudet
Kuva: Yliview of the smart features of the dimmer switch, including Remote Access, Voice Control (compatible with Alexa and Google Assistant), Scheduling & Timer, and Grouping, shown alongside the dimmer and a smartphone app interface.
- Etäkäyttö: Control your lights from anywhere using the Feit Electric app.
- Ääniohjaus: Compatible with Amazon Alexa and Google Assistant. Use voice commands to turn lights on/off or adjust brightness (e.g., "Alexa, dim the kitchen lights to 20%").
- Aikataulutus ja ajastin: Set schedules for your lights to turn on/off or dim at specific times.
- Ryhmittely: Group multiple Feit Electric smart devices together for simultaneous control.
Smooth Dimmability
Image: A visual representation of the smooth dimmability feature, showing five stages of light intensity from 1%-20% to 81%-100% brightness.
The dimmer provides smooth transitions across its dimming range, from 1% to 100% brightness. Ensure compatible dimmable LED bulbs are used for optimal performance.
Huolto
The Feit Electric Smart Dimmer Light Switch requires minimal maintenance.
- Puhdistus: Puhdista kytkin ja seinälevy pyyhkimällä pehmeällä,amp liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia. Varmista, että virta on katkaistu ennen puhdistamista.
- Polttimon yhteensopivuus: For best dimming performance and to prevent flickering, use only dimmable LED bulbs.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Dimmer not responding / No power | No neutral wire; Power off at breaker; Loose wiring. | Verify neutral wire presence. Check circuit breaker. Re-check wiring connections. |
| Lights flickering or buzzing | Non-dimmable bulbs; Incompatible dimmable bulbs; Overloaded circuit. | Ensure all bulbs are dimmable LEDs. Try different brand of dimmable LED bulbs. Check total wattage does not exceed dimmer's maximum rating. |
| Ei voi muodostaa yhteyttä Wi-Fi-verkkoon / Sovellusongelmat | Incorrect Wi-Fi band (not 2.4GHz); Incorrect pairing procedure; Weak Wi-Fi signal. | Ensure your router is broadcasting a 2.4GHz network. Follow app pairing instructions carefully. Move closer to router or improve Wi-Fi signal. |
| 3-way/4-way wiring not working | Incorrect wiring for multi-way setup; Defective switch. | Review wiring diagrams for 3-way/4-way configurations. Ensure only one smart dimmer is on the line side for 3-way, or two smart dimmers for specific 3-way setups. Consult an electrician if issues persist. |
Tekniset tiedot
Image: A detailed specification sheet for the dimmer switch, including physical dimensions, setup requirements, compatible wiring types, gang installation options, voltage ja maksimi wattitage.
- Mallinumero: B0D4YFCTHV
- Merkki: Feit Electric
- Product Dimensions (Switch): 4.6 cm (K) x 2.8 cm (L) x 1.7 cm (S)
- Tuotteen paino: Approximately 1.3 Pounds (for 3-pack)
- Asennusvaatimukset: Neutral Wire, 2.4GHz Wi-Fi
- Compatible Wiring: Single Wiring, 3-WAY (1 smart dimmer on circuit), 3-WAY (2 smart dimmers on same circuit)
- Compatible Gang Installation: 1-Gang, 2-Gang, 3-Gang
- Voitage: 120 Volt, 60Hz, 15 Amp Max
- Max Wattage: 450 wattiatage (Incandescent/Halogen), 150 Watt Dimmable LED
- Toimintatila: Automaattinen
- Yhteystiedot: Normaalisti auki
- Liittimen tyyppi: Ruuviliittimet
- Terminaali: Ruuvi
- Toimilaitteen tyyppi: Saranavipu
- Yhteystiedot: Messinki
- Kansainvälinen suojaluokitus: IP20
Takuutiedot
Specific warranty details for the Feit Electric Wi-Fi Smart Dimmer Light Switch are typically provided with the product packaging or available on the official Feit Electric websivusto. Katso tarkimmat ja ajantasaisimmat takuuehdot näistä lähteistä.
Tukea
Jos tarvitset lisäapua, teknistä tukea tai view frequently asked questions, please visit the official Feit Electric websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Yhteystiedot löytyvät yleensä tuotepakkauksesta tai valmistajan websivusto.
