SingularXYZ E1 Lite GNSS RTK -mittauslaitteiden käyttöohje

1. Johdanto

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your SingularXYZ E1 Lite GNSS RTK Surveying Equipment. Designed for high-precision satellite positioning, this system offers centimeter-level accuracy for various surveying applications. Please read this manual thoroughly before using the equipment to ensure optimal performance and safety.

2. Sisältö

Upon opening the transport case, verify that all components are present:

• E1 Lite GNSS Receiver (x2)
• Transport Case (x2)
• USB-C-kaapeli (x2)
• Super Charger (x2)
• SingularPad Software (x1)
• SC200 Data Collector (x1)
• USB-kaapeli (x1)
• Super Charger (x1)
• Kiinnike (x1)
• Pikaopas (x1)
• Quick Start Card (x1)
• Whip Antenna (x2)
• Tape Measure (x1)
• 20 cm extension rod plugged on tribrach (x1)

Figure 2.1: E1 Lite GNSS RTK Surveying Equipment components.

Figure 2.2: Product packaging and contents.

Erityinen huomautus: Poles, tripods, and tribrachs are not included with this product and must be acquired separately if needed for your surveying tasks.

3. Asennus ja alkuyhteys

3.1 Laitteiden lataaminen

The E1 Lite RTK handheld GPS provides over 20 hours of continuous operation on a single charge. Use the provided Type-C chargers to fully charge both the E1 Lite GNSS Receivers and the SC200 Data Collector before initial use. Fast charging is supported.

3.2 Laite ohiview ja käyttöliittymät

Familiarize yourself with the device's front panel indicators and various connection interfaces:

Figure 3.1: Front Panel and Interfaces of the E1 Lite GNSS Receiver.

• Etupaneeli: Satellite Tracking Indicator, Static & Network Indicator, Power Indicator, Function Button.
• Liitännät: NFC (Touch connection), Bluetooth, USB Type-C (for charging and data download), WiFi, TNC Connector (for UHF Antenna), RS232 Serial Port.

3.3 Connecting Devices via SingularPad Software

The SingularPad software is essential for controlling and configuring your E1 Lite GNSS RTK equipment. Follow these steps to connect your devices:

Yleiset kytkentävaiheet:

1. Turn on your GNSS device.
2. On the SC200 Data Collector, open the SingularPad software.
3. Navigoi kohteeseen Device >> Communication kytkeäksesi laitteesi.
4. For SingularXYZ RTK Receivers (e.g., Y1 GNSS receiver): Select SingularXYZ >> RTK >> Bluetooth. Etsi your device's Serial Number (SN) and connect.
5. For GNSS NMEA Devices (other brands): Select Other >> RTK(NMEA0183) >> Bluetooth. Search and connect the device.
6. For SingularXYZ GNSS Tablets (e.g., T8 Pro GNSS tablet): Select Other >> Internal GPS >> Internal GPS and connect the device.
7. After successful connection, you can go to Device >> Device Information to view current device information.

Figure 3.2: Setting up Rover and Base units in SingularPad.

Setting up Rover and Base (for Base + Rover mode):

1. Ensure you have two E1 Lite GNSS receivers. Designate one as the base and the other as the rover.
2. Connect both to your PDA device via Bluetooth.
3. Place both your E1 Lite base and rover in an open view taivaalta.
4. Connect the whip antenna to both E1 Lite base and rover.
5. Setting up the Base: Connect E1 Lite base to your PDA, go to Device >> Base. varten Base Startup Mode, you can input known point coordinates or select Yksi piste mode for automatic setup. Set Datayhteys as Internal Radio, and customize radio channels, frequency, and protocol. Save settings and Start Base.
6. Setting up the Rover: Disconnect E1 Lite base and connect to the rover in the software. Go to Device >> Rover, setti Tietolinkki as Internal Radio. Match and set the same protocol and frequency as the base setting. Click Kokoelma to save settings and click Käytä.

4. Käyttöohjeet

4.1 työtilaa

The E1 Lite GNSS RTK system supports two primary working modes:

• Base + Rover Mode: Provides millimeter-level positioning. Compatible with base stations of other brands. Not subject to network and regional restrictions.
• Rover + CORS Mode: Provides centimeter-level positioning. Requires a network signal. CORS account is not included and must be purchased from your local CORS provider.

Figure 4.1: E1 Lite Working Modes.

4.2 Working with CORS/RTK Correction Service

To utilize the CORS/RTK correction service, ensure you have purchased a CORS/RTK Correction Service account in your local area. Your PDA device (phone/tablet/data collector) must have network access and support Bluetooth connection. Place your E1 Lite GNSS receiver in an open view taivaalta.

1. Open SingularPad software.
2. Napsauta "Communication" and connect to your E1 Lite receiver's SN via Bluetooth.
3. Napsauta Saada to obtain Mount-Point list and select appropriate one. Click Aloita ja Käytä.
4. Napsauta "Rover". Sarja Tietolinkki as Phone Internet. Then go to Yhdistä-tila and fill in your CORS/RTK Correction Service account details.

Figure 4.2: Connecting to CORS/RTK Correction Service.

4.3 Viewing RTK Positioning Status

After completing your E1 Lite RTK setup, check the current RTK solution status in the upper left corner of the SingularPad software:

• KIINTEÄ: E1 Lite is receiving corrections stably and obtaining a Fixed RTK solution with centimeter-level accuracy. Typically, E1 Lite achieves a Fixed RTK solution in a few seconds under good environments.
• KELLUA: E1 Lite receives corrections from the base/CORS, but due to obstructions or magnetic field interference, the signal reception is not very stable and the accuracy is sub-meter level. In tougher conditions, it may take a bit longer to achieve FIXED status.
• AUTONOMINEN: Single-point satellite positioning without receiving RTK correction data. The accuracy is around meter-level.

Figure 4.3: RTK Positioning Status Indicators.

Kärki: Before surveying, make sure E1 Lite has a clear sky, free from obstacles like buildings, trees, cars, and more.

4.4 Lisäominaisuudet

• 60° Tilt Surveying: The E1 Lite GNSS Surveying System with IMU initializes in 5 seconds and supports tilt measurements up to 60°, compatible with regular 5/8" thread poles. This allows for surveying in challenging locations without needing perfect vertical alignment.
• 5 Kilometers UHF Range: The radio range between the rover and the base can reach 5 kilometers (3.1 miles). The E1 Lite is compatible with base stations of other brands in both Radio and CORS mode and supports RTCM v3/CMR correction data transmission.
• Robust Signal Tracking: Supports Full-Constellation Tracking (GPS/GLONASS/Galileo/BDS/QZSS/IRNSS/SBAS etc.), allowing for fixed RTK solutions in seconds even in challenging environments like multipath, trees, and city canyons.
• Easy Data Download via Web Käyttöliittymä: Access E1's WiFi to conduct static data download, firmware upgrade, and configuration via its web sivu.

Figure 4.4: Advanced IMU Tilt Measurement in action.

Figure 4.5: Superior Performance in Challenging Environments.

Figure 4.6: Easy Data Download via Web UI.

5. Huolto

The E1 Lite GNSS RTK equipment is designed for durability and reliability in harsh environments. It features an IP68 luokitus, making it waterproof, dustproof, and shock-resistant.

• Puhdista laite säännöllisesti pehmeällä, damp kangas. Vältä hankaavia puhdistusaineita.
• Ensure all ports (Type-C, TNC) are free from debris and properly sealed when not in use.
• Store the equipment in its transport case when not in use to protect it from physical damage and environmental factors.
• Periodically check cables and connectors for wear and tear. Replace if damaged.

Figure 5.1: E1 Lite's Rugged Design and Battery Life.

6. Vianmääritys

If you encounter issues with your E1 Lite GNSS RTK Surveying Equipment, consider the following common points:

• Yhteysongelmat: Ensure Bluetooth is enabled on both the data collector and the receiver. Verify that the correct device type and manufacturer are selected in the SingularPad software. Try restarting both devices.
• Poor Accuracy/No Fixed Solution:
  • Varmista, että vastaanottimella on esteetön view of the sky, free from obstructions like buildings, dense trees, or large metal objects.
  • Check the status indicator on the device and in the SingularPad software (refer to Section 4.3).
  • Verify that the base station (if in Base+Rover mode) or CORS service (if in Rover+CORS mode) is active and providing corrections.
  • Confirm that the radio frequency and protocol settings match between the base and rover units.
• Akun kesto: Ensure devices are fully charged before use. Check the battery indicator in the SingularPad software.
• Ohjelmisto-ongelmat: Ensure your SingularPad software is up to date. Refer to the software's help section or online tutorials for specific software-related problems.

For persistent issues or problems not covered here, please contact SingularXYZ customer support for assistance. Refer to the "Support" section for contact details.

7. Tekniset tiedot

Figure 7.1: E1 Lite RTK Key Specifications.

Kuva 7.2: Kevyt ja kannettava muotoilu.

8. Takuu

The SingularXYZ E1 Lite GNSS RTK Surveying Equipment comes with a yhden vuoden takuu from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards. Please retain your proof of purchase for warranty claims.

9. Tuki ja resurssit

SingularXYZ is committed to providing excellent customer support. For any inquiries, technical assistance, or service requests, please utilize the following resources:

• 1-On-1 Support Service: Direct technical support is available to assist you with any operational or technical challenges.
• Käyttöohje (PDF): Käyttöoppaan kattava PDF-versio on ladattavissa. Lataa PDF-käyttöopas
• Video-opetusohjelmat: Access a library of video tutorials to help you get started and master various functions of your equipment.
• Ohjelmistopäivitykset: Enjoy permanent free software upgrades and update services for the SingularPad and Post-processing Software.
• FCC Radio License Note: U.S. users must apply for an FCC radio license for commercial use (e.g., surveying, construction) with the UHF function (450–470 MHz). The device is FCC certified, and supporting information can be provided if needed.

For direct contact, please visit the official SingularXYZ websivustolta tai katso tuotedokumentaation mukana toimitetut yhteystiedot.