S866 LCD Display User Manual

Johdanto

The S866 LCD Display is designed for electric bikes, providing essential ride data and status information. It features a large, clear screen with backlighting for visibility in various conditions, and is built with durable, lightweight ABS material. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your S866 LCD Display.

Turvallisuustiedot

• Varmista aina, että näyttö on kiinnitetty tukevasti ennen ajoa.
• Älä yritä purkaa tai muokata näyttöä, sillä se voi mitätöidä takuun ja aiheuttaa vahinkoa.
• Pidä näyttö poissa äärimmäisistä lämpötiloista ja suorasta auringonvalosta pitkiä aikoja.
• Avoid exposing the display to excessive moisture or submersion, despite its IP65 waterproof rating.
• Ensure the communication protocol of your electric bike matches the display (UART) before connecting.

Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• 1 x S866 LCD Display
• 1 x manuaali

Tekniset tiedot

Asennus ja asennus

Näytön asentaminen

The S866 LCD Display is designed for easy installation on handlebars with a diameter of 22.2mm. No special tools are required for mounting.

1. Identify a suitable position on your electric bike's handlebar, ensuring it does not obstruct your view tai pyörän hallintaa.
2. Open the bracket on the back of the S866 LCD Display.
3. Place the display bracket around the 22.2mm section of the handlebar.
4. Securely tighten the screw on the bracket until the display is firmly in place and does not rotate freely.

Image: The S866 LCD Display shown mounted on an electric bike handlebar, illustrating its compact size and clear visibility from the rider's perspective.

Näytön liittäminen

The display connects to your electric bike's controller via an SM plug. Ensure your bike's communication protocol is UART.

1. Locate the corresponding SM plug on your electric bike's wiring harness.
2. Align the pins of the S866 LCD Display's SM plug with the pins of the bike's harness.
3. Gently push the plugs together until they click into place, ensuring a secure connection.
4. Verify the connection is firm and the wires are not strained or exposed.

Kuva: Yksityiskohtainen view of the S866 LCD Display's SM plug, highlighting its multi-pin connector for electrical connection to the e-bike system.

Käyttöohjeet

Virran kytkeminen päälle/pois

• To power on the display, press and hold the power button (usually marked with a power symbol) for a few seconds until the screen illuminates.
• To power off the display, press and hold the power button again until the screen turns off.

Näyttötoiminnot

The large LCD screen provides an intuitive view of various data points:

• Nopeus: Displays current riding speed (km/h or mph).
• Akun taso: Indicates the remaining battery charge with a graphical icon.
• Avustustaso: Shows the current pedal assist level (e.g., 1-5).
• Matkan pituus: Displays the distance covered during the current ride.
• Kokonaismatka (ODO): Näyttää ajetun kokonaismatkan.

Image: The S866 LCD Display showing its main screen with speed, battery level, assist level, and trip distance clearly visible, demonstrating its intuitive data presentation.

Painikkeiden toiminnot

• Virtapainike: Press and hold to turn the display on or off. Short press may cycle through display modes (e.g., Trip, ODO).
• '+'-painike: Increases the pedal assist level or navigates up in menu settings.
• '-'-painike: Decreases the pedal assist level or navigates down in menu settings.

Huolto

• Puhdistus: Pyyhi näyttöruutu ja runko pehmeällä,amp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Varastointi: When not in use for extended periods, store the display in a cool, dry place away from direct sunlight.
• Liitännät: Periodically check the SM plug connection to ensure it remains secure and free from corrosion.
• Tarkastus: Regularly inspect the display for any physical damage or loose components.

Vianetsintä

Takuu ja tuki

For warranty information and technical support regarding your S866 LCD Display, please refer to the specific warranty terms provided by your retailer or contact the seller directly. Keep your proof of purchase for any warranty claims.