Godox X3 S Nano Touchscreen TTL Wireless Flash Trigger for Sony User Manual

1. Johdanto

The Godox X3 S Nano Touchscreen TTL Wireless Flash Trigger is designed for Sony camera systems, providing wireless control over compatible flashes within the Godox X wireless radio system. This compact and lightweight trigger features an intuitive touchscreen interface for easy adjustment of flash settings.

It operates on a 2.4 GHz frequency, offering a wireless range of up to 328 feet (100 meters). Key functionalities include support for Sony's ADI / P-TTL system, high-speed sync up to 1/8000 second, and control over flash exposure compensation, modeling light, and zoom settings. The device is powered by an internal rechargeable battery and includes a USB-C port for charging and firmware updates.

2. Mitä laatikossa on

Verify that all components are present upon unpacking your Godox X3 S Nano Flash Trigger:

• Godox X3 S Touchscreen TTL Wireless Flash Trigger for Sony
• USB-C latauskaapeli
• Carry Bag

Image: Included components: Godox X3 S trigger, USB-C cable, and carry bag.

3. Tuote ohiview

The Godox X3 S Nano features a compact design with a touchscreen interface and physical buttons for essential controls.

Kuva: Edessä view of the X3 S Nano, highlighting the touchscreen and control buttons.

Tärkeimmät komponentit:

• Kosketusnäyttö: Primary interface for adjusting settings.
• Salamakenkäkiinnitys: For attaching to a camera.
• USB-C-portti: Lataus- ja laiteohjelmistopäivityksiä varten.
• M/Q Button: Mode/Quick access button.
• Flash-painike: Test flash button.
• Ohjausvalinta: Valikoiden selaamiseen ja arvojen säätämiseen.

Kuva: Sivu view showing the control buttons and dial.

4. Asennus

4.1 Akun lataaminen

The X3 S Nano has an internal rechargeable lithium-ion battery. Before first use, fully charge the device.

1. Connect the supplied USB-C cable to the USB-C port on the trigger.
2. Liitä USB-C-kaapelin toinen pää USB-virtalähteeseen (ei sisälly toimitukseen) tai tietokoneen USB-porttiin.
3. The charging indicator on the screen will show the charging status. The device is fully charged when the indicator shows full.

4.2 Kiinnitys kameraan

Attach the X3 S Nano to your Sony camera's hot shoe.

1. Slide the hot shoe foot of the X3 S Nano into the camera's hot shoe.
2. Secure the trigger by tightening the locking mechanism (if present) on the hot shoe mount.

4.3 Virran kytkeminen päälle/pois

Press and hold the power button (usually integrated with the control dial) for a few seconds to power on or off the device.

5. Käyttöohjeet

5.1 Käyttöliittymän perusnavigointi

The X3 S Nano features a touchscreen for intuitive control. Tap on icons or values to select them, and use the control dial or on-screen +/- buttons to adjust settings.

5.2 Pairing with Flashes

To wirelessly control Godox X system flashes, ensure both the trigger and the flash units are set to the same channel and ID.

1. On the X3 S Nano, access the channel settings via the touchscreen. Select a channel (1-32).
2. Set a wireless ID (01-99 or OFF) if desired for interference prevention.
3. On your compatible Godox flash unit, set the same channel and ID.
4. The trigger should now be able to communicate with the flash. Perform a test flash using the flash button on the trigger.

5.3 Adjusting Flash Settings

The touchscreen allows for quick adjustments:

• Salamatila: Tap to switch between TTL, Manual (M), and Multi (Stroboscopic) modes.
• Ryhmähallinta: Select individual flash groups (A, B, C, etc.) to adjust their power levels or modes independently.
• Teholähtö: In Manual mode, tap the power value and use the dial or +/- buttons to adjust from 1/1 to 1/256.
• Salamavalon korjaus (FEC): In TTL mode, adjust FEC from -3 to +3 EV.
• High-Speed ​​Sync (HSS): The trigger supports HSS up to 1/8000 second when used with compatible cameras and flashes. This is typically enabled automatically or through camera settings.
• Mallinnusvalo: Control the modeling light on compatible flash units.
• Zoomaa: Adjust the flash head zoom for compatible units.

5.4 laiteohjelmistopäivitystä

Tarkista säännöllisesti Godoxin virallinen website for firmware updates. Connect the X3 S Nano to a computer via the USB-C cable and follow the instructions provided by Godox for the update process.

6. Huolto

6.1 Puhdistus

• Use a soft, dry cloth to clean the exterior of the trigger.
• For the touchscreen, use a microfiber cloth specifically designed for electronics. Avoid abrasive materials or harsh chemicals.
• Keep the hot shoe contacts clean and free of dust or debris.

6.2 Varastointi

When not in use, store the X3 S Nano in its provided carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Vianmääritys

8. Tekniset tiedot

Kuva: Pohja view displaying product information and regulatory details.

9. Takuu ja tuki

Takuutietoja ja teknistä tukea varten ota yhteyttä viralliseen Godoxin websivustolta tai ota yhteyttä paikalliseen jälleenmyyjään. Säilytä ostokuitti ostotodistuksena takuuvaatimuksia varten.

Godoxin virallinen Websivusto: www.godox.com