ATTACK SHARK X3 Kevyt Langaton Pelihiiri Käyttöohje

Johdanto

The ATTACK SHARK X3 is a lightweight wireless gaming mouse designed for precision and versatility. It features a Pixart PAW3395 optical sensor, Kailh GM8.0 switches, and tri-mode connectivity (2.4G wireless, Bluetooth, and USB-C wired). This manual provides essential information for optimal use and maintenance of your device.

Image: The ATTACK SHARK X3 mouse in orange, showcasing its ultra-lightweight design, tri-mode connectivity, PixArt PAW3395 sensor, up to 26000 DPI, and Kailh GM8.0 switches.

Pakkauksen sisältö

Varmista, että pakkauksessa on kaikki tarvittavat osat:

• ATTACK SHARK X3 Langaton Pelihiiri
• USB-C-datakaapeli
• 2.4G USB-vastaanotin (hiiren sisällä)
• Käyttöopas (tämä asiakirja)

Tuote loppuview

Tutustu hiiren osiin:

Image: Diagram illustrating the components of the ATTACK SHARK X3 mouse, including the Left Button, Right Button, Middle Button (scroll wheel), Type-C Port, 2.4G-OFF-BT switch, DPI Indicator Light, DPI Button, Receiver Organizer, Forward Button, and Backward Button. Mouse dimensions are also shown: 118.5mm length, 61mm width, 39.7mm height.

• Vasen/oikea painikkeet: Hiiren vakioklikkaustoiminnot.
• Keskimmäinen painike (vierityspyörä): Scrolling and middle-click function.
• Eteen-/taaksepäin-painikkeet: Side buttons for navigation, programmable via driver.
• DPI-painike: Säätää hiiren herkkyyttä (DPI).
• DPI-merkkivalo: Shows the current DPI setting.
• Mode Switch Button (2.4G/OFF/BT): Selects the connection mode.
• Tilan merkkivalo: Indicates the active connection mode.
• USB-C-portti: Langallista yhteyttä ja latausta varten.
• USB Receiver Organizer: Storage compartment for the 2.4G USB receiver.

Asennus

1. Hiiren liittäminen

The ATTACK SHARK X3 supports three connection modes:

Image: Underside of the ATTACK SHARK X3 mouse showing the 2.4G/OFF/BT switch and the USB receiver slot. Text highlights Performance Mode (2.4GHz), Efficiency Mode (Bluetooth 5.0), and Wired USB-C Mode.

2.4G langaton tila:

1. Paikanna hiiren pohjassa olevasta lokerosta 2.4G USB-vastaanotin.
2. Liitä USB-vastaanotin tietokoneesi vapaaseen USB-porttiin.
3. Liu'uta hiiren pohjassa oleva tilanvalitsin asentoon "2.4G".
4. Hiiren pitäisi muodostaa yhteys automaattisesti.

Bluetooth-tila:

1. Liu'uta hiiren pohjassa oleva tilanvalitsin "BT"-asentoon.
2. Avaa tietokoneellasi tai laitteellasi Bluetooth-asetukset ja hae uusia laitteita.
3. Select "ATTACK SHARK X3" from the list of available devices to pair.
4. Huomautus: The mouse can connect to up to 4 devices simultaneously in Bluetooth mode. Short press the mode switching key to switch between BT channels. Press and hold for 3 seconds for code pairing.

USB-C-langallinen tila:

1. Connect the provided USB-C data cable to the mouse's USB-C port.
2. Liitä kaapelin toinen pää tietokoneen vapaaseen USB-porttiin.
3. Hiiri toimii langallisena hiirenä ja latautuu samanaikaisesti.

2. Driver Installation (Optional)

To customize the 5 programmable buttons, DPI settings, polling rate, LOD (Lift-Off Distance), and macros, download the official ATTACK SHARK X3 driver from the manufacturer's website. The driver allows for advanced configuration and saving profiles directly to the mouse's memory.

Huomautus: For macOS users, initial settings may need to be configured on a Windows PC or virtual machine, as the settings are saved to the mouse's internal memory.

Image: Screenshot of the ATTACK SHARK X3 driver software interface, showing options for button settings, DPI adjustment, polling rate, LOD, and macro customization.

Käyttöohjeet

DPI-säätö

The mouse features 6 adjustable DPI levels. Press the DPI button on the underside of the mouse to cycle through the preset DPI settings:

• 800 DPI
• 1600 DPI
• 2400 DPI
• 3200 DPI
• 5000 DPI
• Up to 26000 DPI (configurable via software)

The DPI indicator light will change color to reflect the current DPI setting.

Akku ja lataus

The ATTACK SHARK X3 mouse is equipped with a long-lasting battery, offering up to 200 hours of continuous use on a single charge. When the battery is low, the indicator light will signal. Connect the mouse using the USB-C cable to charge it. The mouse can be used while charging in wired mode.

Image: The ATTACK SHARK X3 mouse with text indicating "Play Longer, Charge Less" and "Run For Up To 200 Hours Of Continuous Game."

Image: Graphic illustrating the 200-hour long-lasting battery life of the ATTACK SHARK X3 mouse, with a charging progress bar.

Huolto

Puhdistus

Optimaalisen suorituskyvyn ja hygienian ylläpitämiseksi puhdista hiiri säännöllisesti. Pyyhi pinta pehmeällä, kuivalla liinalla. Pinttyneeseen likaan käytä hieman kuivaa liinaa.amp voidaan käyttää miedolla saippualla kostutettua liinaa varmistaen, ettei nestettä pääse hiiren sisäisiin osiin. Vältä voimakkaita kemikaaleja tai hankaavia materiaaleja.

PTFE Feet Care

The mouse features 100% virgin grade PTFE feet for smooth gliding. Keep the mouse feet clean and free from dust or debris to ensure consistent slide performance. Avoid scratching or damaging the PTFE feet, as this can affect tracking and movement.

Image: Underside of the ATTACK SHARK X3 mouse highlighting the 100% virgin grade PTFE feet, designed for consistent gliding.

Vianetsintä

If you encounter issues with your ATTACK SHARK X3 mouse, please refer to the following common solutions:

• Hiiri ei vastaa:
  • Ensure the mouse is charged. Connect it via USB-C cable to charge.
  • Check the mode switch on the bottom of the mouse. Ensure it is set to the correct mode (2.4G or BT).
  • For 2.4G mode, ensure the USB receiver is securely plugged into your computer.
  • Bluetooth-tilassa varmista, että Bluetooth on käytössä laitteessasi ja että hiiri on paritettu. Yritä paritusta uudelleen tarvittaessa.
  • If using wired mode, ensure the USB-C cable is properly connected to both the mouse and the computer.
• Lag or Disconnections (Wireless Modes):
  • Move the mouse closer to the USB receiver (for 2.4G) or your Bluetooth device to reduce interference.
  • Ensure there are no large metallic objects or other wireless devices causing interference between the mouse and receiver/device.
  • Kokeile kytkeä 2.4G-vastaanotin toiseen USB-porttiin.
  • If experiencing lag after waking from sleep (especially on macOS), try turning the mouse off and then back on.
• Inconsistent Tracking or Movement:
  • Puhdista hiiren alapuolella oleva optinen anturi pehmeällä, kuivalla liinalla.
  • Varmista, että käytät hiirtä sopivalla alustalla (esim. hiirimatolla). Vältä voimakkaasti heijastavia tai läpinäkyviä pintoja.
  • Check the DPI setting. Adjust it to a level that suits your preference.
• Vierityspyörän ongelmat:
  • Varmista, että vierityspyörä on puhdas ja vapaa roskista.
  • Jos ongelma jatkuu, se voi viitata laitteisto-ongelmaan.
• Buttons Not Responding or Double-Clicking:
  • Ensure the mouse driver software is up to date if you are using custom button assignments.
  • The Kailh GM8.0 switches are designed for durability; however, if issues arise, contact support.

Jos nämä ohjeet eivät ratkaise ongelmaasi, ota yhteyttä ATTACK SHARK -asiakastukeen saadaksesi lisäapua.

Tekniset tiedot

Image: Close-up of the Pixart PAW3395 flagship optical sensor, highlighting its precision and speed with specifications like 50G acceleration, 26,000 DPI, and 650 IPS.

Kuva: Sisäinen view of the ATTACK SHARK X3 mouse, showing the Kailh GM8.0 switches and TTC encoder, emphasizing 80 million clicks lifespan and well-defined scroll steps.

Virallinen tuotevideo

Takuu ja tuki

ATTACK SHARK products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official ATTACK SHARK websivusto. Säilytä ostokuitti takuuvaatimuksia varten.

For additional resources and driver downloads, visit the official ATTACK SHARK websivusto: ATTAC SHARK -myymälä