1. Johdanto
Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: Sunco 4ft LED Shop Light
2. Turvallisuustiedot
To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts, abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.
- VAROITUS: Sähköiskun vaara. Katkaise virta sulakkeesta tai johdonsuojakatkaisimesta ennen asennusta tai huoltoa.
- VAROITUS: Tulipalon vaara. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
- WARNING: Risk of Injury. Käytä suojalaseja ja käsineitä asennuksen ja huollon aikana.
- Tämä teline on tarkoitettu vain sisäkäyttöön. Do not use in wet locations or where directly exposed to water.
- Tämä laite on ei himmennettävä. Do not connect to a dimmer switch.
- Älä muuta laitetta. Muutokset voivat mitätöidä takuun ja aiheuttaa turvallisuusriskin.
- Varmista syöttötilavuustage is compatible with the fixture (120V-277V).
3. Pakkauksen sisältö
Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:
- 2 x Sunco LED Shop Light Fixtures
- Mounting Equipment (Surface)
4. Asennus ja asennus
Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.
- Valmistele kiinnityspaikka: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
- Asenna asennuslaitteisto: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
- Kytke johdot: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
- Turvallinen kiinnitys: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.

Kuva 4.1: Asennusvaiheet
Daisy Chain Linkability
This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattagLinkitettyjen valaisimien määrä ei ylitä piirin kapasiteettia.

Image 4.2: Daisy Chain Connection Point
5. Käyttöohjeet
The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.
Selectable Color Temperature (CCT)
Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.

Image 5.1: Selectable CCT Options
6. Huolto
The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.
- Puhdistus: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
- LED: it: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.
7. Vianmääritys
If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty | Ei virtalähdettä Virheellinen johdotus CCT switch not set | Tarkista sulake ja seinäkytkin. Verify all wire connections are secure and correct. Ensure the CCT switch is set to a valid color temperature. |
| Valo välkkyy | Epävakaa virtalähde Löysä johtoliitäntä | Varmista, että virtalähde on vakaa ja määritetyn tilavuuden sisällätage valikoima. Tarkista kaikkien johtoliitäntöjen kireys. |
| Valo ei ole niin kirkas kuin odotettiin | Virheellinen CCT-asetus Dust or debris on lens | Adjust the CCT switch to a brighter setting (e.g., 6000K). Clean the lens according to maintenance instructions. |
8. Tekniset tiedot
| Merkki | Sunco-valaistus |
| Mallinumero | WR_PR8-WH-4060K-2PK |
| Tuotteen mitat | 48 cm P x 8.58 cm L x 2.56 cm K |
| Wattage | 60W |
| Kirkkaus | 7200 lumenia |
| Tehokkuus | 118 LM / W |
| Värilämpötila (CCT) | Selectable 4000K, 5000K, 6000K |
| Voitage | 120V-277V |
| Himmennettävä | Ei |
| Sisä-/ulkokäyttö | Vain sisätiloissa |
| Asennustyyppi | Huuhtele kiinnitys |
| Erikoisominaisuus | yhdistettävissä |
| Valonlähteen tyyppi | LED |
| Materiaali | Seosteräs, polykarbonaatti |
| Keskimääräinen elämä | 50,000 tuntia |
| Sertifikaatit | ETL, FCC, RoHS |
| Kohteiden määrä | 2 (pakkaus) |
9. Takuu ja tuki
Sunco Lighting seisoo tuotteidensa laadun takana.
- Takuu: Tämän tuotteen takana on 3 vuoden takuu ostopäivästä lukien. Säilytä ostokuitti takuuvaatimuksia varten.
- Asiakastuki: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.
Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.