Sure-Lites APC7RG

Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light User Manual

Model: APC7RG

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light. This unit is designed to meet code requirements for emergency egress lighting in commercial buildings, offering both an illuminated exit sign and emergency lighting with adjustable LED heads.

Eight Sure-Lites All-Pro APC7RG Combination LED Exit Signs and Emergency Lights

Kuva 1.1: ohiview of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light units.

2. Turvallisuustiedot

Please read and understand all instructions before installation and operation. Retain this manual for future reference.

  • Sähköturvallisuus: All wiring must be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
  • Tuotteen eheys: Do not modify or alter the product. Use only manufacturer-specified replacement parts.
  • Sijainti: This unit is UL certified and damp location listed. Ensure the installation environment is suitable.
  • Akku: The unit contains a nickel-cadmium battery. Dispose of batteries according to local regulations.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

  • Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light Unit
  • Snap-fit canopy with captive mounting screws
  • Directional chevrons (snap-in/snap-out)
  • Installation hardware (screws, wire nuts)
  • Nickel Cadmium Battery (pre-installed or separate)

4. Asennus ja asennus

The APC7RG is designed for easy installation with universal J-box mounting and snap-fit construction, allowing for installation in under 5 minutes.

4.1 Asennusvaihtoehdot

The unit offers universal surface mounting flexibility and can be configured for:

  • Kattoon kiinnitys
  • Seinäteline
  • End mount

It supports configurable single or double faces.

Diagram showing easy installation features: snap-fit construction, ceiling/wall/back mount, 90 minutes run time, and 17 feet egress coverage.

Image 4.1: Key installation and performance features.

4.2 Johdotus

  1. Varmista, että virta on katkaistu sulakkeesta.
  2. Connect the unit's wiring to the building's AC power supply (120V) according to local electrical codes.
  3. Secure the unit to the universal J-box using the provided hardware and snap-fit canopy.

4.3 Field Selectable Features

The APC7RG exit face is illuminated with long-lasting LEDs that are field selectable for red or green letters. The unit is pre-set to red letters and can be easily changed to green letters during installation. Snap-in/snap-out directional chevrons (arrows) can also be configured to indicate the direction of egress.

Diagram showing components of the exit sign: selectable single or double faces, snap-in/snap-out directional chevrons, high impact UV resistant housing, nickel cadmium battery, field selectable red or green LEDs and inserts, and long life LEDs.

Kuva 4.2: Räjähtänyt view highlighting field-selectable features and components.

Two images showing the exit sign in different commercial settings, one with red letters and one with green letters, demonstrating the selectable faces feature.

Kuva 4.3: Esim.ample of selectable red or green exit sign faces in commercial environments.

5. Käyttöohjeet

5.1 Normaali käyttö

When AC power is supplied, the LED exit sign will illuminate, and the battery will charge. A power indicator light (usually green) located on the bottom of the exit sign will confirm AC power is present and the battery is charging.

5.2 Hätäkäyttö

In the event of an AC power failure, the unit will automatically switch to battery backup mode. The exit sign and emergency lights will operate for a minimum of 90 minutes, providing up to 17 feet of emergency egress coverage.

5.3 Testaus

A test switch is located on the bottom of the exit sign. Press and hold the test switch to simulate a power outage. The unit should switch to battery power, and the exit sign and emergency lights should illuminate. Release the switch to return to normal operation. Regular testing is recommended to ensure proper functionality.

6. Huolto

  • Akku: The nickel-cadmium battery is designed for no maintenance. However, it is recommended to perform monthly 30-second functional tests and annual 90-minute discharge tests to ensure the battery holds a charge and the unit operates correctly during an emergency.
  • Puhdistus: Puhdista laitteen ulkopuoli pehmeällä, damp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
  • Tarkastus: Periodically inspect the unit for any physical damage or discoloration.

7. Vianmääritys

Katso yleisiä ongelmia ja niiden ratkaisuja alla olevasta taulukosta.

OngelmaMahdollinen syyRatkaisu
Exit sign or emergency lights do not illuminate during power outage.Battery not charged or faulty; unit not connected to AC power.Ensure AC power is connected and indicator light is on. Allow 24 hours for initial battery charge. If problem persists, battery may need replacement.
Virran merkkivalo ei pala.No AC power; faulty wiring; indicator light malfunction.Check circuit breaker. Verify wiring connections. Contact a qualified electrician if necessary.
Emergency lights do not stay on for 90 minutes during test.Akun kapasiteetti pienentynyt.Perform a full 90-minute discharge test and recharge. If run time is still insufficient, the battery may need replacement.

8. Tekniset tiedot

Key technical details for the Sure-Lites All-Pro APC7RG unit:

Diagram showing the dimensions of the Sure-Lites All-Pro APC7RG exit sign: 16.57 inches (421mm) length, 2.32 inches (59mm) width, 8.26 inches (210mm) height. Also indicates damp location rating, operating temperature range, selectable faces, UL certification, and T20 compliance.

Image 8.1: Product dimensions and certifications.

OminaisuusYksityiskohta
MerkkiSure-Lites
Mallin nimiAPC7RG Case Pack
OsanumeroAPC7RG
MateriaaliHigh-impact, UV resistant thermoplastic (Polycarbonate)
VäriWhite finish, Red/Green selectable light
Tuotteen mitat (P x L x K)16.57 cm x 2.32 cm x 8.26 cm
Valonlähteen tyyppiLED
Valonlähteiden lukumäärä2 (emergency heads)
Wattage2.01 wattia
Kirkkaus156 lumenia
Voitage120 volttia
VirtalähdeJohdollinen sähkö
Akun tyyppiNickel Cadmium (NiCAD)
Average Battery Life (Emergency Run Time)90 minuuttia
Egress CoverageJopa 17 jalkaa
AsennustyyppiFlush Mount (Universal J-box)
SertifikaatitUL 924, NEC, NFPA101, NFPA70, CEC Title 20 compliant, Damp Listattu sijainti
Tuotteen paino21.4 paunaa (8 kappaleen pakkaus)

9. Takuu ja tuki

9.1 Takuutiedot

The Sure-Lites All-Pro APC7RG unit comes with a 5-year limited warranty. The NiCad battery carries a seven-year pro-rated warranty. Please refer to the warranty documentation included with your purchase for full terms and conditions.

9.2 Asiakastuki

For technical assistance, replacement parts, or warranty claims, please contact Sure-Lites customer support. Contact information can typically be found on the manufacturer's websivustolla tai tuotepakkauksessa.