1. Johdanto
This manual provides detailed instructions for the installation, setup, and operation of your Kasa Smart Ceiling Fan Control & Dimmer Switch (KS240). This device allows you to control your ceiling fan's speed and light brightness from the switch, the Kasa Smart app, or via voice commands with compatible smart home platforms.
2. Turvallisuustiedot
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker before installation. Improper installation can lead to serious injury or death.
- Ensure power is OFF at the circuit breaker before beginning installation.
- Install in a standard indoor wall box only.
- A neutral wire is required for operation.
- Do not exceed the maximum load ratings: LED 150W, Halogen/Incandescent 300W, AC Motor Fan 1.5A (less than 60W).
- Consult a qualified electrician if you are unsure about wiring or electrical procedures.
3. Pakkauksen sisältö
- 1 x Kasa Smart Ceiling Fan Control & Dimmer Switch (KS240)
- 1 x seinälevy
- Lankamutterit
- Ruuvit
- Pika-asennusopas
4. Tuote ohiview
The Kasa Smart KS240 switch integrates both fan speed control and light dimming into a single wall-mounted unit. It features intuitive touch controls and smart functionality.
Figure 4.1: Kasa Smart KS240 Switch Components
Tärkeimmät ominaisuudet:
- 4 tuulettimen nopeutta: Säädä ilmavirtausta mieleiseksesi.
- Säädettävä kirkkaus: Dim lights from 1% to 100%.
- Ääniohjaus: Yhteensopiva Apple HomeKitin, Amazon Alexan ja Google Assistantin kanssa.
- Sovelluksen hallinta: Manage fan and light settings remotely via the Kasa Smart app.
- Aikataulutus ja ajastin: Automate fan and light operation.
- ETL-sertifioitu: Varmistaa turvallisuus- ja laatustandardit.
Figure 4.2: Kasa Smart KS240 Key Features
5. Yhteensopivuusvaatimukset
Before installation, ensure your existing setup meets the following requirements:
Figure 5.1: Kasa Smart KS240 Compatibility
- Separate Load Wires: Your ceiling fan and light must have separate load wires for independent control.
- Nollajohdin: A neutral wire (typically white) is required in your wall box.
- Wi-Fi-verkko: A 2.4GHz Wi-Fi network is necessary for smart functionality.
- Tuulettimen tyyppi: Compatible with AC motor speed control fans (1.5A, less than 60W).
- Valon tyyppi: Supports LED (150W Max) and Halogen/Incandescent (300W Max) bulbs.
- Yhteensopimaton: Not compatible with exhaust fans, DC motor fans, or ceiling fans with integrated remote control/Bluetooth/Wi-Fi speed controls.
6. Asennusopas
Before proceeding, ensure power is OFF at the circuit breaker to avoid electric shock.
- Sammuta virta: Paikanna sulake ja katkaise virta kytkimestä, jota olet vaihtamassa. Varmista, että virta on katkaistu äänenvoimakkuuden mittarilla.tage testaaja.
- Vanhan kytkimen poistaminen: Unscrew and carefully remove the existing wall plate and switch from the wall box.
- Tunnista johdot: Label each wire connected to your old switch. Common wires include Line (hot), Load (to fan/light), Neutral, and Ground. The Kasa app provides an app-guided installation to assist with wire identification.
- Connect Kasa Smart Switch: Connect the wires from your wall box to the corresponding wires on the Kasa Smart Switch using the provided wire nuts. Refer to the wiring diagram below. Ensure all connections are secure.
Figure 6.1: Kasa Smart KS240 Wiring Diagram
- Asennuskytkin: Carefully fold the wires and push the switch into the wall box. Secure the switch with screws.
- Kiinnitä seinälevy: Snap on the new wall plate.
- Palauta virta: Turn the power back on at the circuit breaker. The switch's LED indicator should begin flashing, indicating it's ready for setup.
7. App Setup & Smart Home Integration
After physical installation, configure your KS240 switch using the Kasa Smart app.
- Download Kasa Smart App: Download the Kasa Smart app from the Apple App Store or Google Play Store.
- Create Kasa Account: Open the app and create a Kasa account or log in if you already have one.
- Lisää laite: Tap the '+' icon in the app, select 'Device', then 'Smart Switches', and choose 'Smart Fan Control & Dimmer Switch (KS240)'. Follow the on-screen instructions to connect the switch to your 2.4GHz Wi-Fi network.
- Älykkään kodin integrointi:
- Apple HomeKit: Once set up in the Kasa app, you can add the KS240 to Apple HomeKit. Open the Apple Home app, tap '+', and scan the HomeKit code on your device or packaging. For troubleshooting, visit TP-Link HomeKit Support.
- Amazon Alexa/Google Assistant: Link your Kasa account within the Alexa or Google Home app to enable voice control.
Figure 7.1: Apple HomeKit Integration
8. Käyttöohjeet
8.1 Manuaalinen ohjaus
- Tuulettimen nopeuden säätö: Slide the left control bar up or down to adjust the fan speed (4 levels). Press the fan button below the bar to turn the fan On/Off.
- Light Dimmer Control: Slide the right control bar up or down to adjust the light brightness (1% to 100%). Press the light button below the bar to turn the light On/Off.
8.2 Sovellusten hallinta
Use the Kasa Smart app to control your fan and light from anywhere:
- Adjust fan speed and light brightness.
- Aseta aikataulut ja ajastimet automaattista toimintaa varten.
- Enable 'Away Mode' to randomly turn lights on/off for security.
- Configure 'Sleep Mode' for gradual dimming or fan speed reduction.
8.3 Ääniohjaus
Control your fan and light using voice commands with Apple HomeKit (Siri), Amazon Alexa, or Google Assistant:
Figure 8.1: Voice Control Example
- "Hei Siri, laita tuuletin päälle."
- "Alexa, set the fan to speed 3."
- "Hey Google, dim the light to 50%."
9. Huolto
- Clean the switch with a soft, dry cloth. Do not use liquid cleaners.
- Ensure the wall plate is securely fastened to prevent dust and debris from entering the switch mechanism.
- Regularly check for firmware updates via the Kasa Smart app to ensure optimal performance and security.
10. Vianmääritys
10.1 Switch Not Responding / LED Flashing Red
- Tarkista teho: Varmista, että sulake on päällä ja kytkin saa virtaa.
- Wi-Fi-yhteys: Verify your 2.4GHz Wi-Fi network is active and the switch is within range. Re-attempt setup in the Kasa app if necessary.
- Nollajohdin: Confirm the neutral wire is correctly connected. This is essential for the switch to function.
10.2 Light Not Dimming Properly
- Polttimon yhteensopivuus: Ensure your LED bulbs are dimmable. Some LED bulbs may not dim effectively or may flicker.
- Kuormitusrajat: Tarkista kokonaispainotage of your lights does not exceed the 150W (LED) or 300W (Halogen/Incandescent) maximum.
- App Calibration: Use the Kasa Smart app to calibrate the minimum and maximum dimming levels for your specific bulbs.
10.3 Fan Not Responding / Incorrect Speed
- Tuulettimen tyyppi: Confirm your fan is an AC motor speed control fan and not an incompatible type (e.g., DC motor, integrated smart control).
- Tuulettimen vetoketju: Ensure your ceiling fan's pull chain is set to its highest speed setting. The Kasa switch controls the speed from there.
- Kuormitusrajat: Verify the fan's current draw does not exceed 1.5A (less than 60W).
10.4 Accidental Factory Reset
- The switch can be factory reset by holding either the fan or light button for 5 seconds. If this occurs accidentally, you will need to re-add the device to the Kasa Smart app.
11. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Mallinumero | KS240 |
| Tuotteen mitat | 4.13 x 1.75 x 1.64 tuumaa |
| Käyttö Voltage | 120 volttia (AC) |
| Nykyinen luokitus | 2.5 Amps |
| Max Load (LED) | 150W |
| Max Load (Halogen/Incandescent) | 300W |
| Max Load (AC Motor Fan) | 1.5A (less than 60W) |
| Wi-Fi-taajuus | Vain 2.4 GHz |
| Neutraalijohto vaaditaan | Kyllä |
| Sertifikaatit | ETL |
| Valmistaja | TP-linkki |
12. Takuu ja tuki
For warranty information and technical support, please visit the official Kasa Smart (TP-Link) website or contact their customer service. You can find support resources, FAQs, and contact details at TP-Link-tuki.
