1. Johdanto
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the DANFOSS BFP 21R3 Burner Oil Pump, model number 071N0109. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
Kuva 1: Yleistä view of the DANFOSS BFP 21R3 Burner Oil Pump.
2. Turvallisuustiedot
Always observe general safety precautions when working with fuel systems and electrical components. Failure to follow these instructions may result in property damage, serious injury, or death.
- Ensure the power supply to the burner system is disconnected before installation, maintenance, or troubleshooting.
- Käytä asianmukaisia henkilönsuojaimia (PPE), mukaan lukien käsineet ja silmäsuojaimet.
- Handle fuel with care. Fuel is flammable and can cause skin irritation.
- Asennuksen ja huollon saa suorittaa vain pätevä henkilöstö.
- Tarkista vuodot asennuksen jälkeen ja ennen järjestelmän käyttöönottoa.
- Do not modify the pump or its components. Use only genuine DANFOSS replacement parts.
3. Tuote ohiview
The DANFOSS BFP 21R3 is a compact burner oil pump designed for use in oil burner systems. It is engineered for reliable fuel delivery and pressure regulation. The pump features a robust metal construction and is suitable for industrial applications.
Kuva 2: Sivu view of the pump, highlighting the 'P' (pressure) and 'V' (return) ports, and model identification.
Keskeisiä ominaisuuksia ovat:
- Malli: BFP 21R3
- Osanumero: 071N0109
- Materiaali: Metalli
- Väri: Musta
- Sovellus: Burner Oil Systems
Kuva 3: Yläosa view of the pump, showing the electrical connector for power supply.
4. Asennus ja asennus
Proper installation is crucial for the pump's performance and longevity. Refer to your burner manufacturer's instructions for specific mounting requirements.
4.1 Asennus
- Mount the pump securely to the burner motor or a stable surface using appropriate fasteners.
- Ensure the pump shaft aligns correctly with the motor coupling.
Kuva 4: Pohja view of the pump, illustrating the drive shaft and mounting screw locations.
4.2 Polttoaineletkun liitännät
Connect the fuel lines as follows:
- Inlet (Suction) Line: Connect the fuel supply line to the designated inlet port. Ensure a tight, leak-free connection.
- Nozzle Line (Pressure): Connect the line leading to the burner nozzle to the pressure port (marked 'P' on some models).
- Paluulinja: If applicable, connect the return line to the return port (marked 'V' on some models) to send excess fuel back to the tank. For single-pipe systems, the return port must be plugged.
4.3 Sähköliitännät
Connect the pump's electrical terminals to the burner control system according to the burner manufacturer's wiring diagram. Ensure correct voltage and polarity. All electrical work must comply with local codes and regulations.
4.4 Pumpun esitäyttö
After installation, the pump must be primed to remove air from the fuel lines. This is typically done by running the burner for a short period until a steady flame is established. Some pumps may have a bleed screw for manual air removal.
5. Käyttöohjeet
Once installed and primed, the DANFOSS BFP 21R3 pump operates automatically in conjunction with the burner control system. The pump maintains the required fuel pressure for efficient combustion.
5.1 Paineen säätö
The pump's pressure can be adjusted via a pressure regulating screw, typically located on the pump body. Use a pressure gauge to set the desired operating pressure as specified by the burner manufacturer. Turn the screw clockwise to increase pressure and counter-clockwise to decrease pressure.
6. Huolto
Regular maintenance ensures optimal performance and extends the life of the pump.
6.1 Rutiinitarkastukset
- Inspect fuel lines for leaks, cracks, or damage.
- Tarkista sähköliitäntöjen tiiviys ja korroosio.
- Kuuntele käytön aikana epätavallisia ääniä, jotka voivat viitata ongelmaan.
6.2 Suodattimen vaihto
The pump typically contains an internal filter that should be inspected and replaced periodically, usually annually or as recommended by the burner manufacturer. A clogged filter can restrict fuel flow and reduce pump performance.
Figure 5: Close-up of the pump's drive shaft, which connects to the motor.
7. Vianmääritys
This section outlines common issues and potential solutions. Always disconnect power before performing any troubleshooting steps.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei öljyvirtausta | Clogged filter, air in lines, faulty motor, incorrect rotation | Clean/replace filter, bleed air, check motor, verify pump rotation |
| Matala öljynpaine | Clogged filter, worn pump components, incorrect pressure setting | Clean/replace filter, inspect pump, adjust pressure regulator |
| Liiallinen melu | Air in lines, loose mounting, worn bearings | Bleed air, tighten mounting bolts, inspect for wear |
| Öljyvuotoa | Loose fittings, damaged seals | Tighten connections, replace seals |
8. Tekniset tiedot
| Erittely | Arvo |
|---|---|
| Valmistaja | DANFOSS |
| Mallinumero | BFP 21R3 |
| Osanumero | 071N0109 |
| Materiaali | Metalli |
| Väri | Musta |
| Tyyli | Teollinen |
9. Takuu ja tuki
For warranty information or technical support, please contact your authorized DANFOSS dealer or the seller from whom the product was purchased. Keep your proof of purchase for warranty claims.
