Johdanto
The SparkFun LTE Stick provides a development and prototyping platform for the LARA-R6 LTE Cat 1 module from u-blox. This version, LARA-R6401, is designed for North America, supporting both data and voice communication across major mobile networks including AT&T, Verizon, T-Mobile, and FirstNet. It features a nanoSIM card slot for network selection and includes common u-blox functionalities like uFOTA (over-the-air firmware updates), Root of Trust, secure boot/update, jamming detection, and antenna/SIM detection.
The board routes UART and I2S interfaces to a 0.1-inch spaced plated-through-hole (PTH) header, along with Reset and Power On signals, facilitating easy breadboard prototyping. It also includes two SMA connectors for primary and secondary antennas, and power can be supplied via USB-C or the VIN PTH pin.
Tuote loppuview
Asennus
1. Virtalähde
The SparkFun LTE Stick can be powered in two ways:
- USB-C-liitin: This is the recommended power source. Connect a standard USB-C cable to the board and a power source (e.g., computer USB port, USB wall adapter).
- VIN PTH Pin: For advanced users, power can be supplied via the VIN plated-through-hole pin. The maximum input voltage for VIN is 6V. The board defaults to using the higher voltage input if both are connected.
2. SIM-kortin asennus
The board includes a nanoSIM card slot. Insert your nanoSIM card into the designated slot. Ensure the SIM card is oriented correctly as indicated on the board.
Huomautus: Check with your network provider for compatibility with the LARA-R6 module.
3. Antenniliitäntä
The LTE Stick features two SMA connectors for antennas:
- Primary Antenna (ANT1): This antenna is used for both transmitting and receiving data.
- Secondary Antenna (ANT2): This antenna is receive-only.
Connect appropriate LTE antennas to these SMA connectors. For optimal performance, ensure both antennas are connected.
4. Interfacing with Microcontrollers
The board provides PTH headers for easy connection to breadboards and microcontrollers:
- UART-liitäntä: Primary communication interface for data.
- I2S Interface: For digital audio applications, enabling voice functionality.
- Reset and Power On Signals: Accessible via PTH for external control.
Test points are available for advanced users to solder to for the I2C interface, secondary UART, and four GPIO pins (IO1, IO2, IO3, and IO6). These test points are 1.8V only and are not level-shifted.
Käyttöohjeet
Peruskäyttö
- Ensure the SIM card is properly inserted and antennas are connected.
- Connect the USB-C cable to power the device. The power LED on the board should illuminate.
- Use the UART interface to communicate with the LARA-R6 module via AT commands. Refer to the u-blox LARA-R6 series documentation for a comprehensive list of AT commands and their usage.
- For voice applications, connect an audio codec, microphone, and speaker to the I2S interface and implement the necessary code on your microcontroller.
Firmware Updates (uFOTA)
The LARA-R6 module supports uFOTA (over-the-air firmware updates). Consult u-blox documentation for detailed procedures on performing firmware updates to ensure your module has the latest features and security enhancements.
Huolto
- Pidä taulu puhtaana ja vapaana pölystä ja roskista.
- Avoid exposing the board to extreme temperatures or humidity.
- Varmista riittävä ilmanvaihto, kun työskentelet pitkiä aikoja.
- Handle the board by its edges to prevent damage to components.
- Regularly check for and apply firmware updates as recommended by u-blox to maintain optimal performance and security.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Board not powering on. | Incorrect power supply; loose USB-C connection; VIN voltage kantaman ulkopuolella. | Ensure USB-C cable is securely connected and functional. Verify VIN voltage is within 3.3V-6V range if using PTH. |
| Ei verkkoyhteyttä. | SIM card not inserted correctly; incompatible SIM card; antenna issues; network not supported. | Re-insert SIM card, ensuring correct orientation. Verify SIM card is active and compatible with LARA-R6. Check antenna connections. Confirm network support for LARA-R6 bands. |
| Communication issues via UART. | Incorrect baud rate; wiring errors; module not initialized. | Verify baud rate settings match the module's configuration. Check UART wiring for continuity and correct pin connections. Ensure the module is powered and initialized. |
| Voice functionality not working. | I2S wiring issues; audio codec not configured; software implementation errors. | Review I2S wiring. Ensure audio codec is correctly connected and configured. Debug software for proper I2S and voice handling. |
Tekniset tiedot
- Moduuli: u-blox LARA-R6401 LTE Cat 1
- Alue: Pohjois-Amerikassa
- LTE FDD -kaistat: 2, 4, 5, 12, 13, 14, 66, 71
- Liitännät:
- 2x UART
- USB 2.0
- I2C
- 9 GPIO-nastaa
- Digital Audio (I2S)
- SIM-korttipaikka: Nano SIM
- Antenniliittimet: 2x SMA (Primary: Transmit & Receive, Secondary: Receive Only)
- Tehon syöttö: USB-C (recommended) or VIN PTH pin (6V Max)
- Käyttö Voltage: 3.3V or 1.8V (for test points)
- Mitat: 3.74 x 0.98 x 0.2 tuumaa
- Paino: 8 unssia
Tukea
For additional support, technical documentation, and community forums, please visit the official SparkFun website or the u-blox documentation portal for the LARA-R6 series.
SparkFun Store: Visit the SparkFun Store on Amazon
