VECELO KHD-OC18-BLK

VECELO KHD-OC18-BLK Ergonomic High Back Mesh Office Chair Instruction Manual

Model: KHD-OC18-BLK

1. Turvallisuustiedot

Please read and understand all safety information before assembling and using this chair. Failure to follow these instructions may result in injury or damage to the product.

  • Suurin kapasiteetti: Älä ylitä suurinta sallittua painokapasiteettia, joka on 500 paunaa (227 kg).
  • Kokoonpano: Always assemble the chair strictly according to the provided instructions. Ensure all parts are securely fastened before use.
  • Säädettävät ominaisuudet: Exercise caution when using adjustable and reclining features to prevent pinching or injury.
  • Vakaus: Do not stand on the chair. Avoid leaning excessively to one side, which could cause the chair to tip over.
  • Lapset: Keep children away from the chair during assembly. This product contains small parts that could be a choking hazard.

2. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ja ehjät ennen kokoamisen aloittamista. Jos osia puuttuu tai on vaurioitunut, ota yhteyttä asiakastukeen.

  • 1x High Back Office Chair (disassembled components)
  • 1x Assembly Tools (Allen wrench, screws, etc.)
  • 1x Assembly Instruction (this document)

3. Kokoamisohjeet

The VECELO Ergonomic Office Chair is designed for straightforward assembly. Follow these steps carefully to ensure a secure and functional chair.

  1. Kiinnitä pyörät: Aseta viisi pyörää tuolin jalustan kummankin jalan päässä oleviin reikiin. Paina lujasti, kunnes ne napsahtavat paikoilleen.
  2. Aseta kaasunostin paikalleen: Aseta kaasunostosylinteri kootun tuolin jalustan keskireikään.
  3. Attach the Mechanism: Secure the seat plate mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
  4. Yhdistä istuin kaasujousitukseen: Aseta koottu istuin varovasti kaasunostosylinteriin ja varmista, että se on keskitetty ja vakaa.
  5. Kiinnitä selkänoja: Align the backrest with the mounting points on the seat mechanism and secure it with the designated screws.
  6. Käsinojien asentaminen: Attach the armrests to the sides of the seat using the provided screws.
  7. Säädä niskatukea: Slide the headrest into its designated slot at the top of the backrest.
  8. Lopputarkastus: Once assembled, sit on the chair to ensure all components are properly seated and stable. Test all adjustment functions.

For visual guidance, please refer to the official product video below.

Videon kuvaus: This official VECELO video demonstrates the assembly process and key adjustable features of the Swivel Ergonomic High Back Mesh Office Chair. It provides a visual guide to help users set up their chair correctly and understand its functionalities.

4. Käyttöohjeet

The VECELO Ergonomic Office Chair offers multiple adjustment features to customize your seating experience for optimal comfort and support.

4.1. Istuimen korkeuden säätö

To adjust the seat height (range: 16.8"-20"), locate the lever on the right side beneath the seat. Pull the lever upwards while seated to lower the seat, or pull the lever upwards while standing to raise the seat. Release the lever at the desired height.

4.2. Backrest Tilt Function

The backrest can recline between 90° and 135°. To adjust the tilt, pull out the lever on the left side beneath the seat. Lean back to the desired angle and push the lever back in to lock the position. The chair can lock at 90°, 101°, and 135°.

Diagram showing the 135 degree rocking backrest function with levers for tilt and height adjustment.

Kuvan kuvaus: A diagram illustrating the 135° rocking backrest feature, showing the chair tilting from 90° to 135°. It highlights the lever for seat height adjustment and the lever for tilt control, along with an illustration of backrest tension adjustment.

4.3. Säädettävä niskatuki

The headrest offers multiple adjustments for neck support:

  • Korkeuden säätö: The headrest can be adjusted up and down by 5 cm (approximately 2 inches).
  • Eteen-/taaksepäin säätö: It can be adjusted forward/backward by 3 cm (approximately 1.2 inches).
  • Kierto: The headrest can rotate 45 degrees to fit the curve of your cervical spine.
Close-up image of a woman resting her head on the adjustable headrest of the office chair, with diagrams showing its up/down and rotation capabilities.

Kuvan kuvaus: Lähikuva view of the adjustable headrest, demonstrating its ability to move up and down by 3.15 inches and rotate 45 degrees. The image emphasizes its function in effectively supporting the head and relaxing the neck.

4.4. Säädettävät käsinojat

The armrests can be adjusted in height by 7 cm (approximately 2.7 inches) to provide optimal support for your shoulders and elbows, enhancing work efficiency.

4.5. Lannerangan tuki

The chair features a curved lumbar support designed to provide solid support and ensure a snug fit without suspending the spine, promoting an energized posture.

5. Huolto

Proper maintenance will extend the life and appearance of your VECELO office chair.

  • Puhdistus: For the mesh backrest and PU seat, wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the materials.
  • Tarkastus: Tarkista säännöllisesti kaikkien ruuvien ja pulttien kireys. Kiristä tarvittaessa uudelleen.
  • pyörät: Keep the casters clean from hair and debris to ensure smooth movement and prevent floor damage.
  • Vältä suoraa auringonvaloa: Pitkäaikainen altistuminen suoralle auringonvalolle voi aiheuttaa materiaalien haalistumista tai heikkenemistä.

6. Vianmääritys

If you encounter any issues with your VECELO office chair, refer to the following common solutions:

  • Tuoli narisee: Check all bolted connections and tighten any loose screws. A small amount of silicone lubricant can be applied to moving parts if the squeaking persists.
  • Korkeuden säädön vaikeus: Ensure the gas lift lever is fully engaged or disengaged. If the gas lift is unresponsive, it may need replacement.
  • Tuoli tuntuu epävakaalta: Verify that all casters are fully inserted into the base and that the base itself is not damaged. Ensure all assembly screws are tightened.
  • Pyörät eivät pyöri tasaisesti: Remove any hair or debris from the caster wheels. If a caster is damaged, it may need replacement.

If these steps do not resolve the issue, please contact VECELO customer support for further assistance.

7. Tekniset tiedot

OminaisuusErittely
Tuotteen nimiErgonominen työtuoli
MallinumeroKHD-OC18-BLK
VäriTumma Musta
Takaisin TyyliKorkea selkä
MateriaalitMesh, PU, Sponge, Nylon, Metal
JalkamateriaaliNylon
Istuimen mitat (P x S)20.5 cm x 20.1 cm
Selkänojan mitat (P x K)18.5 cm x 28.4 cm
Tilt Function Range90° - 135°
Säädettävä istuinkorkeus16.8" - 20"
Adjustable Armrest Height7 cm (noin 2.7")
Säädettävä niskatuen korkeus5 cm (noin 2")
Adjustable Headrest Rotation45°
Suurin painokapasiteetti500 lbs (227 kg)
Tuotteen mitat (S x L x K)26 cm x 28 cm x 43.9 cm - 46.9 cm
Tuotteen paino32.6 lbs (14.8 kg)
Diagram showing the detailed dimensions of the VECELO office chair from front and side views.

Kuvan kuvaus: A detailed diagram illustrating the product dimensions of the VECELO office chair, including seat width, seat depth, backrest height, and overall height and width from both front and side perspectives.

8. Takuu ja asiakastuki

VECELO is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, we encourage you to retain your proof of purchase for any warranty claims.

If you have any questions, concerns, or require assistance with your VECELO office chair, please do not hesitate to contact VECELO customer support. Our team is ready to provide speedy and thoughtful service to address any issues you may encounter.

For support, please visit the official VECELO store or contact us through the platform where you purchased the product.

Online-tuki: VECELO Official Store

Aiheeseen liittyvät asiakirjat - KHD-OC18-BLK

Preview Vecelo KHD-OC05-WHT/BLK Office Chair Assembly Instructions
Step-by-step assembly instructions for the Vecelo KHD-OC05-WHT/BLK office chair, including a detailed parts list, return policy, and troubleshooting guide.
Preview VECELO KHD-OC12 Office Chair Installation and Information
This document provides installation instructions, troubleshooting tips, and return policy information for the VECELO KHD-OC12 office chair. It details the components, assembly steps, and contact information for customer support.
Preview VECELO Ergonomic Office Chair Assembly Guide
Comprehensive assembly guide for the VECELO ergonomic office chair (Model ZD-NO.1), including parts list, step-by-step instructions, troubleshooting, and return policy.
Preview VECELO ZD-NO.1 Office Chair Assembly Guide
Comprehensive assembly guide for the VECELO ZD-NO.1 office chair, including parts list, tools, step-by-step instructions, troubleshooting, and return policy. Available in English, German, French, Italian, and Spanish.
Preview Vecelo Ergonomic Office Chair ZD-NO.1 Assembly and Return Information
Assembly instructions, tips, return policy, and contact information for the Vecelo Ergonomic Office Chair, Model ZD-NO.1. Includes component lists and troubleshooting.
Preview Vecelo YJX-No.2 Bed Frame Assembly Instructions
Detailed assembly instructions and troubleshooting guide for the Vecelo YJX-No.2 Bed Frame. Includes parts list, screw guide, and return policy.