1. Johdanto
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your MIZUDO 24kW 240V Electric Tankless Water Heater, Model EQUIK 24kW. Please read this manual thoroughly before installation and use, and retain it for future reference.
The MIZUDO EQUIK 24kW is designed to provide instant, endless hot water on demand, offering high thermal efficiency and a compact design suitable for various residential applications.
Kuva: Edessä view of the MIZUDO 24kW Electric Tankless Water Heater, showing its compact white casing ja digitaalinen näyttö.
2. Tärkeitä turvallisuustietoja
VAROITUS: Virheellinen asennus, säätö, muutos, huolto tai huolto voi aiheuttaa omaisuusvahinkoja, loukkaantumisia tai kuoleman. Lue asennus-, käyttö- ja huolto-ohjeet huolellisesti ennen tämän laitteen asennusta tai huoltoa.
- Tämän laitteen saa asentaa vain pätevä sähköasentaja ja putkimies kaikkien kansallisten ja paikallisten sähkö- ja putkityömääräysten mukaisesti.
- Varmista, että sähkönsyöttö täyttää tässä käyttöohjeessa esitetyt vaatimukset.
- Älä käytä vedenlämmitintä, jos se on vaurioitunut tai toimii virheellisesti.
- Irrota aina laitteen virtajohto ennen minkään huollon tai ylläpidon suorittamista.
- The unit features multiple safety protections including leakage, overheating, high pressure, and dry-fire prevention.
- The unique separation of water and electric circuits prevents electric leakage and scale buildup.
- The unit is ETL certified, ensuring safety and reliability.
Image: Diagram illustrating the ETL certification and various safety features of the MIZUDO water heater, including IPX4 waterproof rating, scald prevention, dry burn prevention, flame-retardant shell, low flow protection, and voltage suojaus.
3. Tuotteen tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Merkki | MIZUDO |
| Mallinumero | EQUIK 24kW |
| Tuotteen mitat | 17.05 cm K x 12.91 cm L x 3.58 cm S |
| Väri | Valkoinen |
| Wattage | 24 kW |
| Voitage | 240 volttia (AC) |
| Maksimilämpötila | 140 Fahrenheit-astetta |
| Lämpöteho | 24000 wattia |
| Tehokkuus | 98 % lämpötehokkuus |
| Asennustyyppi | Seinä |
| Tuotteen paino | 21 kiloa |
| Katkaisijavaatimus | 3 x 40 Amp Two-Pole Circuit Breaker |
| Wire Size Requirement | 3 x 8 AWG |
| Vesiliitännät | 3/4" NPT-kierre |
| Käyttöpaine | Max. 150 PSI |
| Vesitiivis luokitus | IPX4 |
Image: A visual representation of the MIZUDO water heater's dimensions and water connection points (3/4" NPT).
4. Asennus ja asennus
Installation of the MIZUDO 24kW Electric Tankless Water Heater requires professional expertise. It must be performed by a licensed electrician and plumber to ensure compliance with all applicable electrical and plumbing codes and safety standards.
4.1 Sähkövaatimukset
The MIZUDO EQUIK 24kW model requires a 240V electrical supply. It must be connected to three (3) dedicated 40 Amp two-pole circuit breakers. The recommended wire size is 3 x 8 AWG. Ensure your electrical panel has sufficient capacity (minimum 200 Amp palvelu, 300 Amp recommended for older homes) to support the unit's maximum draw of 100A.
Image: A detailed diagram showing the internal wiring of the MIZUDO water heater and its connection to a breaker panel with three 240V/40A two-pole breakers (A, B, C).
4.2 Putkiliitännät
The unit uses 3/4" NPT connections for both water inlet and outlet. Ensure proper shut-off valves are installed on both lines for maintenance. The minimum activation flow is 0.79 GPM, and the maximum flow rate is 5.6 GPM.
4.3 Asennus
The MIZUDO EQUIK 24kW is designed for wall mounting. Choose a location that is protected from freezing temperatures and is easily accessible for maintenance. Ensure the mounting surface is capable of supporting the unit's weight (approximately 21 pounds).
4.4 Asennusvideo-opas
For a visual guide on the electrical wiring method, please refer to the official MIZUDO installation video below. This video demonstrates the correct procedure for connecting the unit to your electrical panel.
Video: MIZUDO 24/27kW Electric tankless water heater wiring method. This video provides a step-by-step demonstration of how to correctly wire the tankless water heater to the electrical panel, including connections for L1, L2, and ground wires for each of the three required circuit breakers.
5. Käyttöohjeet
The MIZUDO EQUIK 24kW features an intuitive LED digital display and touch control panel for easy operation.
5.1 Virta päälle/pois
To power on the unit, ensure all circuit breakers are engaged. The unit will automatically enter standby mode. To activate heating, open a hot water faucet. The unit will begin heating water instantly.
5.2 Lämpötilan säätö
The LED touch display allows for precise temperature adjustment. The temperature range is 86°F to 140°F. Use the up and down arrows on the control panel to set your desired output water temperature. The display will show the real-time temperature and heating status.
Image: Close-up of the MIZUDO water heater's LED digital display and touch control panel, highlighting the power button, temperature display, and up/down arrows for adjustment.
5.3 Water Flow and Temperature Consistency
The intelligent control system and dual water sensors monitor inlet and outlet temperatures to maintain a stable and consistent hot water temperature, even with varying inlet water conditions. The unit delivers hot water in seconds with no preheating required.
Image: A graph illustrating the stable constant temperature output of the MIZUDO water heater compared to a regular product, showing minimal temperature fluctuations.
The unit can support multiple points of use simultaneously, such as a shower, bath, and kitchen sink, depending on the inlet water temperature and desired output temperature. Refer to the flow rate chart below for guidance.
Image: A map of North America showing ground water temperatures by region, accompanied by a chart indicating the maximum GPM and simultaneous shower use based on inlet water temperature for a 24kW unit set to 104°F.
6. Huolto
Regular maintenance ensures optimal performance and longevity of your MIZUDO tankless water heater. Always disconnect power to the unit before performing any maintenance.
- Puhdistus: Pyyhi laitteen ulkopinta säännöllisesti pehmeällä,amp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Veden tulosuodatin: Check and clean the water inlet filter periodically to prevent sediment buildup, which can affect flow rate and performance.
- Kalkinpoisto: In areas with hard water, mineral buildup (scale) can occur within the heating elements. It is recommended to descale the unit annually or as needed by a qualified professional to maintain efficiency.
- Tarkista liitännät: Regularly inspect all water and electrical connections for any signs of leaks or loose wiring.
7. Vianmääritys
If you experience issues with your MIZUDO tankless water heater, refer to the following common troubleshooting steps. For complex issues, contact a qualified technician.
7.1 Safety Thermal Cut-off Reset
If the product stops working due to the safety thermal cut-off protection function, you can reset it to restore normal product operation. This typically occurs if the unit detects an overheating condition or dry-fire event. WARNING: Ensure power is disconnected before attempting this procedure.
- Remove the outer shell of the water heater.
- Locate the safety thermal cut-off switch.
- Press the reset button with a screwdriver.
- Reinstall the outer shell.
To determine if the safety thermal cut-off has tripped:
- The machine is not working (the display screen shows nothing).
- The municipal power supply is normal (test whether other appliances at home are functioning properly).
- The circuit breaker connected to the electric water heater has not tripped.
If all three conditions are met simultaneously, the product's limiter may have tripped, and you will need to open the product cover to reset the safety thermal cut-off.
Image: Step-by-step visual guide on how to reset the safety thermal cut-off on the MIZUDO tankless water heater, showing removal of the cover, locating the reset button, pressing it, and reassembling the unit.
7.2 No Hot Water / Insufficient Hot Water
- Tarkista teho: Ensure the unit is receiving power and all circuit breakers are engaged.
- Veden virtaus: Verify that the water flow rate is above the minimum activation flow (0.79 GPM). Low flow can prevent the unit from activating or heating effectively.
- Lämpötilan asetus: Confirm the desired temperature is set correctly on the LED display.
- Tuloveden lämpötila: In colder climates, very low inlet water temperatures may reduce the maximum achievable flow rate at higher output temperatures. Refer to the flow rate chart in Section 5.3.
- Sedimentin kertyminen: A clogged inlet filter or scale buildup can restrict water flow and heating efficiency. Refer to the Maintenance section.
7.3 Vuodot
- Immediately shut off the water supply and electrical power to the unit.
- Tarkista kaikkien putkiliitosten tiiviys.
- If the leak persists or originates from within the unit, contact a qualified plumber or MIZUDO customer support.
8. Takuu ja asiakastuki
For warranty information, technical assistance, or to purchase replacement parts, please contact MIZUDO customer support. Keep your purchase receipt and model number (EQUIK 24kW) readily available when contacting support.
MIZUDO Home Comfort Direct
For further assistance, you may visit the MIZUDO store on Amazon: MIZUDO Store
