Genmitsu 710W Compact Router GM7100E User Manual

1. Johdanto

This manual provides essential information for the safe and effective use of your Genmitsu 710W Compact Router. Please read this manual thoroughly before operating the device and retain it for future reference. The Genmitsu 710W Compact Router is designed for precision routing tasks, particularly as an upgrade or component for CNC engraving machines.

Tärkeimmät ominaisuudet:

• Luotettava suorituskyky: 710W power output with a rotation speed range of 6500-30000 RPM, adjustable in 1-6 speeds. Features constant torque control and a soft start mechanism. Typical run-out is less than 0.05mm.
• Tarkkuustekniikka: Includes a customized 1/8” ER11 collet and nut for secure and precisely centered bit holding. Compatible with shank diameters from 1-8mm to 1/4”.
• Kestävyys: Equipped with long-life carbon brushes and includes 4 high-quality spare carbon brushes for extended machine lifespan.
• Joustava virtajohto: A 3.5m (11.48 ft) power cord with an included extension connector allows for flexible use in various workspaces.
• Helppo integrointi: 65mm diameter design ensures compatibility with most CNC engraving machines for straightforward upgrades.

2. Turvallisuusohjeet

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using this power tool. Failure to follow these instructions may result in serious injury or damage to the product.

Yleinen turvallisuus:

• Lue kaikki ohjeet: Tutustu työkalun toimintaan ja mahdollisiin vaaroihin.
• Työalue: Pidä työalueesi puhtaana, hyvin valaistuna ja vapaana tavaroista. Älä työskentele räjähdysvaarallisissa ilmakehissä, kuten syttyvien nesteiden, kaasujen tai pölyn läsnä ollessa.
• Sähköturvallisuus: Ensure the power supply matches the tool's requirements (110 Volts). Avoid body contact with grounded surfaces. Do not expose power tools to rain or wet conditions. Do not abuse the cord.
• Henkilökohtainen turvallisuus: Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and a dust mask. Secure loose clothing, jewelry, and long hair.
• Työkalun käyttö ja hoito: Älä pakota työkalua. Käytä oikeaa työkalua työhösi. Irrota pistoke virtalähteestä ennen säätöjen tekemistä, lisävarusteiden vaihtamista tai sähkötyökalujen varastointia.
• Huolto: Maintain tools with care. Keep cutting tools sharp and clean. Follow instructions for lubricating and changing accessories.

3. Tuotteen osat

The Genmitsu 710W Compact Router package includes the following items:

• Genmitsu 710W Compact Router
• 1/8” ER11 Collet and Nut
• 4 varahiiliharjaa
• 17mm jakoavain
• 10mm jakoavain
• Power Cord with Extension Connector

Figure 3.1: Genmitsu 710W Compact Router with included ER11 collet and four carbon brushes.

Figure 3.2: Genmitsu 710W Compact Router showing power cord, two wrenches (17mm and 10mm), and spare carbon brushes.

Figure 3.3: Dimensions of the Genmitsu 710W Compact Router.

Komponentin tunnistus:

• 6-Level Speed Adjusting Dial: Located on the top of the router, allows adjustment of rotation speed from 1 to 6.
• On / off kytkin: Main power switch for the router.
• Carbon Brush Port: Access points for inspecting and replacing carbon brushes.
• Fast Heat Dissipation Vents: Designed to prevent overheating during operation.
• ER11 Collet: Holds the router bit securely.

Figure 3.4: Key features of the Genmitsu 710W Compact Router.

4. Asennus ja asennus

4.1 Reitittimen asennus

The Genmitsu 710W Compact Router features a 65mm diameter, making it compatible with most CNC engraving machine mounts. Ensure the router is securely fastened in its mount before operation to prevent vibration and ensure precision.

4.2 Holkin ja jyrsinterän asentaminen

1. Varmista, että reititin on irrotettu virtalähteestä.
2. Insert the desired router bit into the ER11 collet. The included collet is 1/8”. Note: 1/4” and 1-8mm collets are not included and must be purchased separately if needed.
3. Place the collet with the bit into the router's spindle.
4. Tighten the collet nut using the provided 17mm and 10mm wrenches. Ensure the bit is held securely and precisely centered. Do not overtighten.

Figure 4.1: ER11 Collet compatibility with various shank diameters.

4.3 Virtaliitäntä

Connect the router's power cord to a standard 110V electrical outlet. The 3.5m (11.48 ft) power cord and extension connector provide flexibility for placement. Ensure the power cord is routed safely to avoid entanglement or damage during operation.

5. Käyttöohjeet

5.1 Virran kytkeminen päälle/pois

To power on the router, flip the ON/OFF switch to the 'ON' position. To power off, flip the switch to the 'OFF' position. The router features a soft start, which gradually increases speed upon startup.

5.2 Nopeuden säätäminen

The router features a 6-level speed adjusting dial. Rotate the dial to select the desired speed setting, ranging from 1 (lowest speed, 6500 RPM) to 6 (highest speed, 30000 RPM). Adjust the speed according to the material being routed and the specific router bit in use.

Figure 5.1: Genmitsu 710W Compact Router in operation on a CNC machine.

5.3 Reititystekniikat

Always perform test cuts on scrap material to determine optimal speed and feed rates. Ensure the workpiece is securely clamped. Move the router smoothly and consistently to achieve desired results. The router maintains constant torque control for consistent performance under load.

6. Huolto

Regular maintenance ensures the longevity and optimal performance of your Genmitsu 710W Compact Router.

6.1 Hiiliharjojen vaihto

The router is equipped with long-life carbon brushes, and 4 spare brushes are included. Carbon brushes wear down over time and need replacement when they become too short or if the motor performance degrades. To replace:

1. Katkaise virta: Always unplug the router from the power source before performing any maintenance.
2. Locate Brush Ports: Identify the carbon brush ports on the side of the router housing.
3. Poista vanhat siveltimet: Unscrew the brush caps and carefully pull out the old carbon brushes.
4. Asenna uudet harjat: Insert the new carbon brushes, ensuring they are oriented correctly. Replace the brush caps and tighten them securely.

6.2 Puhdistus

After each use, clean the router to remove dust and debris. Use a soft brush or compressed air to clear vents and the collet area. Do not use solvents or harsh chemicals that could damage plastic parts.

6.3 Collet Care

Periodically inspect the ER11 collet and nut for wear or damage. Clean any accumulated dust or resin from the collet to ensure proper bit seating and prevent bits from getting stuck. Ensure wrenches are used correctly and are not bent or damaged, as this can lead to improper tightening and potential issues.

7. Vianmääritys

This section addresses common issues you might encounter with your Genmitsu 710W Compact Router.

8. Tekniset tiedot

9. Takuu ja tuki

For warranty information, technical support, or service inquiries, please contact Genmitsu customer service. Refer to your purchase documentation or the official Genmitsu websivustolta löydät ajankohtaisimmat yhteystiedot ja takuuehdot.

Genmitsu products are manufactured by SainSmart. For direct support, you may visit the Genmitsu Store on Amazon or the SainSmart official websivusto.