1. Johdanto
This manual provides instructions for the installation, operation, and maintenance of the ANYCUBIC Wash&Cure 3 Station / Wash and Cure 2.0 Replacement Curing Platform Turntable. This turntable is an original accessory designed to ensure optimal performance and compatibility with your ANYCUBIC Wash&Cure station.
2. Turvallisuustiedot
- Always handle the turntable and Wash&Cure station with care.
- Ensure the Wash&Cure station is powered off and unplugged before installing or removing the turntable.
- Keep the turntable clean and free from resin residue to maintain proper function.
- Do not attempt to modify the turntable or use it for purposes other than its intended design.
3. Tuote ohiview
The ANYCUBIC Replacement Curing Platform Turntable is a clear, circular platform with a central spindle designed to rotate 3D printed resin models during the UV curing process. Its perforated surface allows for even light distribution and drainage.
Kuva 3.1: Yläosa view of the ANYCUBIC Replacement Curing Platform Turntable. This image shows the clear, circular design with numerous small perforations and a central mounting point.
4. Yhteensopivuus
This replacement turntable is compatible with the following ANYCUBIC Wash&Cure stations:
- ANYCUBIC Wash&Cure 3 Station
- ANYCUBIC Pesu ja kovetus 2.0
5. Asennus ja vaihto
To install or replace the curing platform turntable, follow these steps:
- Ensure your ANYCUBIC Wash&Cure station is turned off and unplugged from the power source.
- Carefully remove the UV-blocking cover from the Wash&Cure station.
- If replacing an existing turntable, gently lift the old turntable off the central spindle. Dispose of the old turntable responsibly if it is damaged.
- Align the central hole of the new replacement turntable with the spindle on the Wash&Cure station's base.
- Gently press down until the turntable is securely seated on the spindle. Ensure it can rotate freely without obstruction.
- Replace the UV-blocking cover before operating the machine.
Kuva 5.1: Sivu view of the turntable, showing its low profile and the central hub for spindle attachment.
Kuva 5.2: Close-up of the turntable's central spindle connection point and perforated surface.
6. Operating with the Wash&Cure Station
The turntable is an integral part of the curing process within the Wash&Cure station. Once installed, it will automatically rotate during the curing cycle to ensure uniform UV exposure for your 3D printed models.
6.1 Curing Process Overview (using Wash&Cure 2.0 as an example)
The following video demonstrates the general operation of an ANYCUBIC Wash and Cure 2.0 station, which utilizes this type of turntable for effective curing. This will help you understand the context of the turntable's function.
Video 6.1: Demonstration of the ANYCUBIC Wash and Cure 2.0 station. This video illustrates the washing and curing functions, including the rotation of the curing platform turntable to ensure even UV exposure for resin models.
6.2 Alternative Wash and Cure Station Operation
Toinen example of a Wash and Cure station in operation, showcasing the washing and curing capabilities where the turntable plays a role in the curing phase.
Video 6.2: Yliview of the ANYCUBIC Wash and Cure Box 2.0. This video highlights the features and operational modes of the Wash and Cure Box, demonstrating how the curing platform turntable facilitates the post-processing of 3D prints.
7. Huolto
To ensure the longevity and optimal performance of your curing platform turntable:
- Puhdistus: After each use, especially if resin spills occur, clean the turntable with isopropyl alcohol (IPA) or a suitable resin cleaner. Use a soft cloth to avoid scratching the surface.
- Tarkastus: Regularly inspect the turntable for any signs of wear, cracks, or damage. A damaged turntable may affect curing uniformity.
- Varastointi: Store the turntable in a clean, dry place away from direct sunlight when not in use.
8. Vianmääritys
| Antaa | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Kääntöpöytä ei pyöri | Not properly seated on spindle; debris obstructing movement; motor issue in Wash&Cure station. | Ensure turntable is correctly installed. Check for and remove any resin or debris. If the issue persists, consult your Wash&Cure station's manual or contact ANYCUBIC support. |
| Uneven curing on models | Turntable not rotating; insufficient curing time; models too close together. | Verify turntable rotation. Adjust curing time as per resin manufacturer's recommendations. Ensure adequate spacing between models. |
| Turntable is scratched or damaged | Improper cleaning tools; accidental impact. | Replace the turntable with a new original accessory. Use soft cloths for cleaning. |
9. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Tuotteen nimi | Curing Platform Turntable |
| Yhteensopivuus | ANYCUBIC Wash&Cure 3 Station, ANYCUBIC Wash and Cure 2.0 |
| Materiaali | Clear Acrylic/Plastic |
| Likimääräiset mitat | 7.87 x 7.52 x 1.65 tuumaa (pakkauksen mitat) |
| Tuotteen paino | 5.3 unssia |
10. Takuu ja tuki
For warranty information, technical support, or to purchase additional replacement parts, please visit the official ANYCUBIC websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa. Säilytä ostokuitti takuuvaatimuksia varten.
ANYCUBICin virallinen kauppa: Käy myymälässä
