Johdanto
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Sharp XE-A207B Electronic Thermal Cash Register. Please read this manual thoroughly before using the device to ensure proper functionality and longevity. Keep this manual for future reference.
Figure 1: Sharp XE-A207B Electronic Thermal Cash Register. This image shows the complete unit, including the main register body, integrated thermal printer, customer display, operator display, and cash drawer.
1. Asennus ja alkukonfigurointi
1.1 Pakkauksesta purkaminen ja tarkastus
Carefully remove all components from the packaging. Verify that all items listed in the packing list are present and undamaged. Retain the packaging for future transport or storage.
1.2 Virtaliitäntä
- Ensure the cash register is placed on a stable, flat surface.
- Connect the power cord to the power input port on the rear of the cash register.
- Liitä virtajohdon toinen pää maadoitettuun pistorasiaan.
- Turn on the main power switch, typically located on the side or rear of the unit.
1.3 Paperirullan asennus
- Avaa tulostimen kansi nostamalla salpaa.
- Insert a new thermal paper roll, ensuring the paper feeds from the bottom and the leading edge is straight.
- Pull a small amount of paper past the cutting edge.
- Sulje tulostimen kansi tiiviisti, kunnes se napsahtaa paikalleen.
1.4 Initial Date and Time Setting
Upon first power-on, the register may prompt for date and time settings. Follow the on-screen instructions or refer to the programming section for detailed steps on setting the correct date and time.
1.5 Cash Drawer Connection
Connect the cash drawer cable to the designated port on the rear of the cash register. The cash drawer will automatically open during specific transactions (e.g., cash sales, no-sale operations).
2. Käyttöohjeet
2.1 Basic Sales Transaction
- Turn the Mode Switch to the REG (Register) position.
- Enter the item price using the numeric keypad.
- Press the appropriate Department key (e.g., OSTO 1). Repeat for additional items.
- To finalize the sale, press the KOKONAIS avain.
- Enter the amount received from the customer.
- Paina KÄTEISTÄ key. The register will print a receipt and display the change due.
2.2 Using PLU (Price Look-Up) Items
For items programmed with PLU codes:
- Turn the Mode Switch to REG.
- Enter the PLU number.
- Paina PLU key. The item's pre-programmed price will be registered.
- Proceed with the transaction as described in Section 2.1.
2.3 Voiding and Refunds
- Voiding an Item (before TOTAL): Enter the item price, press the Department key, then press the VOID avain.
- Refund (after TOTAL): Turn the Mode Switch to PALAUTTAA (if available) or REG ja käytä PALAUTTAA function. Enter the amount to be refunded and press the KÄTEISTÄ key. Consult the programming guide for specific refund procedures.
2.4 Daily Reports (X-Report and Z-Report)
- X-Report (Reading Report): Provides a current summary of sales without clearing totals. Turn the Mode Switch to Xja paina sitten KOKONAIS avain.
- Z-Report (Reset Report): Clears daily sales totals and prints a comprehensive summary. This report should be run at the end of each business day. Turn the Mode Switch to Zja paina sitten KOKONAIS avain.
3. Huolto
3.1 Laitteen puhdistaminen
Regular cleaning helps maintain the performance and appearance of your cash register.
- Irrota virtajohto ennen puhdistamista.
- Pyyhi ulkopinnat pehmeällä, damp kangas. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Use a soft brush or compressed air to remove dust and debris from the keypad and printer area.
- Clean the thermal print head periodically with a specialized thermal printer cleaning pen or isopropyl alcohol on a cotton swab. Allow to dry completely before use.
3.2 Paperirullan vaihtaminen
Refer to Section 1.3 for detailed instructions on replacing the thermal paper roll.
4. Vianmääritys
This section addresses common issues you might encounter with your Sharp XE-A207B cash register. For problems not listed here, contact customer support.
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Register does not power on. | Power cord disconnected; power switch off; power outlet issue. | Tarkista virtajohdon liitäntä; varmista, että virtakytkin on ON-asennossa; testaa pistorasiaa toisella laitteella. |
| Printer not printing or printing faintly. | Paper roll empty or incorrectly installed; non-thermal paper used; print head dirty. | Replace paper roll correctly (ensure thermal side is facing print head); use thermal paper only; clean print head. |
| Kassalaatikko ei avaudu. | Drawer not connected; drawer lock engaged; mechanical obstruction. | Verify drawer cable connection; ensure drawer is unlocked; check for obstructions inside or around the drawer. |
| Näytöllä näkyy virheilmoitus. | Operational error; programming error. | Refer to the specific error code in the full programming manual (if available) or restart the unit. |
5. Tekniset tiedot
The following are key specifications for the Sharp XE-A207B Electronic Thermal Cash Register:
- Malli: XE-A207B
- Merkki: Terävä
- Tulostimen tyyppi: Lämpötulostin
- Näyttö: Operator and Customer Displays
- Kassalaatikko: Integrated, secure cash drawer
- Liitettävyys: (Not specified in input, assume standard power and drawer connection)
- Päivämäärä, kun ensimmäinen saatavilla: 7. marraskuuta 2023
6. Takuu ja tuki
Takuutiedot löytyvät tuotteen mukana toimitetusta takuukortista tai käymällä Sharpin virallisella verkkosivustolla. website. For technical support, service, or spare parts availability, please contact your local Sharp authorized service center or the retailer from whom you purchased the product.
Huomautus: Spare part information is not available or provided directly within this product's specifications as per initial data.
