1. Johdanto
The HobbyZone Apprentice STOL S 700mm is an ultra-micro remote control aircraft designed for both first-time pilots and experienced individuals teaching others to fly. This model incorporates advanced AS3X and SAFE technologies to enhance stability and ease of control, making the learning process more accessible and enjoyable. This manual provides essential information for the safe assembly, setup, operation, and maintenance of your Apprentice STOL S 700mm.
Image 1.1: The HobbyZone Apprentice STOL S 700mm RC Airplane, a versatile trainer aircraft.
Image 1.2: HobbyZone's commitment to successful flight training.
2. Turvallisuustiedot
VAROITUS: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property, and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation, and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.
- Always operate your aircraft in open areas away from people, vehicles, and buildings.
- Ensure all components are securely attached and in good working order before each flight.
- Never fly near power lines, busy roads, or airports.
- Always disconnect the battery from the aircraft when not in use.
- Follow all local regulations and laws regarding RC aircraft operation.
3. Mitä laatikossa on
The HobbyZone Apprentice STOL S 700mm BNF Basic package includes the following components:
- (1) HobbyZone Apprentice STOL S 700mm Aircraft
- (1) Spektrum™ Brushless Outrunner Motor (installed)
- (1) Spektrum 6A Smart Lite Brushless ESC (installed)
- (4) Spektrum Linear Servos (installed)
- (1) Spektrum Dual-Protocol (DSMX and SLT) Receiver (installed)
- (1) Apprentice STOL S 700mm Product Manual
Please note that a compatible Spektrum DSMX or SLT equipped transmitter, battery, and charger are sold separately and are required for operation.
Image 3.1: The Apprentice STOL S 700mm aircraft, ready for transmitter binding.
4. Asennus
4.1 Lähettimen valmistelu
The Apprentice STOL S 700mm is a Bind-N-Fly (BNF) Basic model, meaning it comes with the power system, servos, and a Spektrum 2.4GHz receiver installed. You will need a compatible Spektrum DSMX or SLT equipped transmitter (sold separately) to operate the aircraft.
4.2 Akku ja laturi
A suitable flight battery and charger are required and sold separately. Refer to the aircraft's specifications for recommended battery types and capacities.
4.3 Binding Process
To bind the aircraft to your transmitter, follow the specific binding instructions provided with your Spektrum transmitter and the detailed instructions in the Apprentice STOL S 700mm product manual. This process establishes communication between your transmitter and the aircraft's receiver.
Image 4.1: Bind-N-Fly Basic advantage, simplifying setup.
4.4 AS3X and SAFE Technology
This model is equipped with Spektrum AS3X (Artificial Stabilization – 3-aXis) technology and optional SAFE Select flight envelope protection technology. AS3X works behind the scenes to smooth out the effects of wind and turbulence, providing a stable and precise flight experience. SAFE Select offers additional assistance for new pilots.
Image 4.2: Explanation of AS3X and SAFE Select technologies.
- Pitch and Bank Angle Limits: These envelope limits prevent the airplane from rolling or pitching upside down, and prevent excessive climb or dive angles.
- Automatic Self-Leveling: The airplane instantly returns to and holds level flight when the sticks are released and in the center position. This feature assists in maintaining wing level during takeoffs, launches, and landings.
- Easy Switch Assignment: No complex programming is required. A simple procedure allows assigning a transmitter switch to turn SAFE Select features on and off. For UMX models like this one, SAFE Select is automatically assigned to channel 5 (Gear) so you can turn it on and off with any switch assigned to that channel (switch A by default on most Spektrum computer transmitters).
Image 4.3: Close-up of the installed brushless outrunner motor and propeller.
Image 4.4: Accessing the battery compartment for installation.
Image 4.5: The tail section of the Apprentice STOL S 700mm.
5. Käyttöohjeet
5.1 Lentoa edeltävät tarkastukset
- Varmista, että lentoakku on täyteen ladattu ja asennettu tukevasti.
- Verify all control surfaces (ailerons, elevator, rudder) move freely and in the correct direction relative to your transmitter inputs.
- Check for any damage to the airframe, propeller, or landing gear.
- Confirm your transmitter is powered on and bound to the aircraft.
5.2 Lentoonlähtö
Place the aircraft on a flat surface, facing into the wind if possible. Gradually increase throttle while applying slight up-elevator to lift off. The SAFE Select technology can assist with stable takeoffs by providing automatic self-leveling.
5.3 Lento-ohjaimet
The Apprentice STOL S 700mm offers full 4-channel control, allowing for precise maneuvers and aerobatic flight capability as your skills progress.
- Throttle: Ohjaa moottorin nopeutta ja korkeutta.
- Siivekkeet: Lentokoneen ohjausrulla (kallistus).
- Hissi: Ohjaa nousua ja laskua (nokka ylös/alas).
- Peräsin: Controls yaw (nose left/right) for directional control and coordinated turns.
Image 5.1: The Apprentice STOL S 700mm performing a stable flight.
5.4 Laskeutuminen
Approach the landing area at a reduced throttle setting. Maintain a gentle descent rate and use elevator control to flare just before touchdown. SAFE Select's self-leveling can aid in smooth landings.
Image 5.2: The aircraft on its landing approach.
6. Huolto
Regular maintenance ensures the longevity and safe operation of your Apprentice STOL S 700mm.
- Lentotarkastus: After each flight, inspect the aircraft for any signs of damage, loose connections, or worn parts.
- Puhdistus: Gently clean the airframe with a soft, dry cloth. Avoid using harsh chemicals that could damage the foam material.
- Potkurin tarkistus: Regularly inspect the propeller for cracks, nicks, or bends. Replace damaged propellers immediately to prevent vibration and potential motor damage.
- Control Surface Hinges: Ensure all control surface hinges are intact and allow for smooth, unrestricted movement.
- Moottori ja ESC: Check for any debris around the motor and ensure the Electronic Speed Controller (ESC) is free from obstructions and properly ventilated.
7. Vianmääritys
If you encounter issues with your Apprentice STOL S 700mm, consider the following troubleshooting steps:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Lentokone ei vastaa lähettimeen. | Not bound, low transmitter/receiver battery, incorrect model selected. | Re-bind aircraft, charge batteries, select correct model on transmitter. |
| Moottori ei pyöri. | Battery not connected, ESC not armed, motor/ESC damage. | Connect battery, ensure throttle is at zero for ESC arming, inspect for damage. |
| Lentokone lentää epäsäännöllisesti. | Control surfaces reversed, trim settings incorrect, damage to airframe. | Check transmitter servo reversals, adjust trim, inspect for damage. |
| Short flight times. | Battery not fully charged, old/damaged battery, aggressive flying. | Ensure full charge, replace old batteries, fly more conservatively. |
8. Tekniset tiedot
Key specifications for the HobbyZone Apprentice STOL S 700mm:
- Tuotteen mitat: 30.5 x 14.45 x 7.25 tuumaa
- Tuotteen paino: 4.45 kiloa
- Tuotteen mallinumero: HBZ6150
- Valmistajan suosittelema ikä: 14 vuotta ja ylöspäin
- Julkaisupäivä: 25. lokakuuta 2023
- Valmistaja: HobbyZone
Image 8.1: Diagram illustrating the dimensions of the Apprentice STOL S 700mm.
9. Takuu ja tuki
For warranty information, technical support, or replacement parts, please contact HobbyZone customer service. Refer to the official HobbyZone webKatso ajantasaisimmat yhteystiedot ja takuuehdot verkkosivustolta tai tuotepakkauksesta.
It is recommended to register your product with HobbyZone to receive updates and support.
