Rebel POWER-800 RB-4012 Pure Sine Wave Inverter

Johdanto

Thank you for choosing the Rebel POWER-800 RB-4012 Pure Sine Wave Inverter. This device is designed to convert 12V DC power from a battery into 230V AC pure sine wave power, suitable for a wide range of electronic appliances. It also features an integrated charging function, allowing it to act as an emergency power supply. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of your inverter.

Turvallisuusohjeet

• Always connect the inverter to a 12V DC battery system. Connecting to other voltages voivat aiheuttaa vahinkoa.
• Ensure proper ventilation around the inverter to prevent overheating. Do not block ventilation openings.
• Keep the inverter away from water, moisture, flammable materials, and direct sunlight.
• Älä avaa invertteriä casing. Laitteen sisällä ei ole käyttäjän huollettavia osia. Jätä kaikki huoltotoimenpiteet pätevän henkilöstön tehtäväksi.
• Ensure all connections are secure and correctly polarized to avoid electrical hazards.
• Irrota akku ennen huolto- tai puhdistustöitä.
• This device is equipped with built-in protection against overload, short circuit, overvoltage, aliarvioitage, and overheating. However, always operate within specified limits.

Tuote loppuview

Familiarize yourself with the components of your Rebel POWER-800 RB-4012 inverter.

Kuva 1: Etupaneeli
This image shows the front of the Rebel POWER-800 inverter, featuring the digital LED display, two AC output sockets, and the DC input cables (red and black) for battery connection. The display provides real-time status information.

Kuva 2: Takapaneeli
This image displays the rear of the Rebel POWER-800 inverter. It includes a cooling fan for heat dissipation, two AC output sockets, the AC input port for grid connection, and a circuit breaker for protection.

Tekniset tiedot

Asennus

1. Akun liitäntä: Connect the red DC cable from the inverter to the positive (+) terminal of your 12V battery. Connect the black DC cable to the negative (-) terminal. Ensure connections are tight and secure. Incorrect polarity will damage the unit.
2. AC Input (Grid Connection): If you intend to use the charging function or have the inverter act as an emergency power supply, connect the AC input cable to a standard 230V AC wall outlet.
3. AC Output (Device Connection): Plug your 230V AC appliances into the output sockets on the inverter's front or rear panel. Ensure the total power consumption of connected devices does not exceed the inverter's rated power of 500W.
4. Sijoitus: Place the inverter on a stable, flat surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure there is adequate space around the cooling fan.

Käyttöohjeet

1. Virta päälle: After all connections are made, switch on the inverter. The LED display will illuminate, showing the current status, including input voltage, lähtö voltage ja akun varaustaso.
2. Monitoring the Display: The LED display provides real-time information. Monitor it for battery status, AC input/output voltage, ja mahdolliset virheindikaattorit.
3. Lataustoiminto: When the inverter is connected to both a battery and an AC grid source, it will automatically charge the connected 12V battery. The display will indicate the charging status.
4. Hätävirtalähde: Jos valtaa outage (loss of AC grid input), the inverter will automatically switch to battery power, providing continuous 230V AC output to connected devices within 4ms.
5. Virta pois: To turn off the inverter, first disconnect all AC appliances, then switch off the inverter, and finally disconnect the AC input cable (if connected) and battery cables.

Huolto

• Puhdistus: Regularly clean the exterior of the inverter with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation openings are free from dust and debris.
• Akun hoito: Ensure your 12V battery is well-maintained and charged. The inverter's charging function helps maintain battery health when connected to the grid.
• Yhteyden tarkistukset: Periodically check all electrical connections (DC and AC) to ensure they remain tight and free from corrosion.
• Varastointi: If storing the inverter for an extended period, disconnect it from the battery and AC power. Store in a cool, dry place.

Vianetsintä

Takuu ja tuki

Rebel products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your retailer. Keep your purchase receipt as proof of purchase.