1. Tärkeitä turvallisuusohjeita
Lue kaikki tämän sähkötyökalun mukana toimitetut turvallisuusvaroitukset, ohjeet, kuvat ja tekniset tiedot. Kaikkien alla lueteltujen ohjeiden noudattamatta jättäminen voi aiheuttaa sähköiskun, tulipalon ja/tai vakavan vamman.
- Käytä asianmukaisia henkilönsuojaimia: Always use safety glasses, a face shield, gloves, and sturdy footwear when operating the saw.
- Pidä työalue tyhjänä: Ensure the area around the cutting zone is free from bystanders, children, and pets.
- Tarkista työkalu ennen käyttöä: Check for any damaged parts, loose connections, or worn blades. Do not operate a damaged tool.
- Secure footing: Maintain proper balance and stable footing, especially when extending the pole for high branches.
- Avoid power lines: Never operate the saw near electrical power lines. Contact with power lines can cause severe injury or death.
- Akun turvallisuus: Use only the specified 24V lithium-ion battery and charger. Do not expose batteries to heat or fire.
- Oikea käsittely: Hold the saw firmly with both hands. Use the shoulder belt for better control and reduced fatigue.
2. Pakkauksen sisältö
Tarkista pakkauksesta purkamisen yhteydessä, että kaikki osat ovat mukana ja vahingoittumattomia.
- YARD FORCE 3m Cordless High Branch Electric Reciprocating Saw Main Unit
- 24V Lithium-ion Battery (x2, one standard, one spare)
- Akkulaturi
- Standard Blade (21cm, for branch cutting)
- Bamboo/Hard Branch Blade (30cm, PROSTAR special accessory)
- Olkahihna
- Suojalasit
- Lightweight Fall Object Face Guard (Stainless Mesh)
- Vibration-Reducing Gloves (LL size)
- Japanese Instruction Manual with Warranty Card
Figure 2.1: Complete package contents including the saw, batteries, charger, blades, and safety accessories.
Kuva 2.2: Yksityiskohtainen view of standard accessories (top) and PROSTAR special accessories (bottom).
3. Tuote ohiview
The YARD FORCE LSC21P-JP is a cordless electric reciprocating saw designed for pruning high branches. It features a lightweight design and a powerful 24V battery system.
Tärkeimmät komponentit:
- Sahapää: Contains the motor and blade attachment mechanism.
- Terät: Two types are included: a 21cm blade for general branch cutting and a 30cm blade for bamboo and harder branches.
- Jatkonapa: Adjustable length from approximately 162cm to 305cm for reaching various heights.
- Handle Section: Features a comfortable grip, safety switch, and battery slot.
- Kulman säätöpainike: Allows for 3-stage angle adjustment of the saw head.
- Pariston ilmaisin: Näyttää akun jäljellä olevan varauksen.
Figure 3.1: Component diagram of the YARD FORCE LSC21P-JP.
4. Asennus
4.1 Akun lataaminen
- Liitä laturi tavalliseen pistorasiaan.
- Insert the 24V lithium-ion battery into the charger.
- The charging indicator on the battery will show the charging status. A full charge takes approximately 80 minutes.
- Kun akku on ladattu täyteen, irrota akku laturista.
4.2 Terän kiinnitys
- Ensure the battery is removed from the saw before attaching or changing blades.
- Press the blade release button on the saw head.
- Insert the desired blade (21cm for general branches or 30cm for bamboo/hard branches) into the blade holder until it clicks securely into place.
- Pull on the blade to ensure it is firmly seated.
Figure 4.1: The two types of blades: branch cutting (top) and bamboo/hard branch cutting (bottom).
4.3 Assembling the Pole and Attaching the Battery
- Connect the extension pole sections by aligning the connectors and pushing them together until the lock engages.
- Adjust the pole length by loosening the locking mechanism, extending the pole to the desired length (162cm to 305cm), and then tightening the lock.
- Insert a charged 24V battery into the battery slot on the handle until it clicks.
- Attach the shoulder belt to the designated points on the pole for comfortable operation and weight distribution.
5. Käyttöohjeet
5.1 Käyttöä edeltävä tarkistuslista
- Ensure all safety gear (face shield, glasses, gloves) is worn.
- Confirm the blade is securely attached.
- Tarkista akun lataustaso.
- Verify the work area is clear of obstacles and people.
5.2 Sahan käynnistäminen ja pysäyttäminen
- To start, press the safety lock-off button (W-switch) and then squeeze the trigger switch.
- Pysäyttääksesi, vapauta liipaisinkytkin.
5.3 Leikkaustekniikat
- Paikannus: Stand firmly on the ground. Use the adjustable pole to reach the branch without overextending.
- Kulman säätö: Käytä 3-stage angle adjustment to find the optimal cutting angle for the branch.
- Leikkaus: Place the blade against the branch and start the saw. Apply gentle, consistent pressure. Do not force the blade. Allow the saw to do the work.
- Avoid pinching: Be aware of the branch's weight and direction of fall to prevent the blade from getting pinched.
- Large branches: For thicker branches (up to 15cm diameter), make an undercut first to prevent bark stripping, then cut from the top.
Figure 5.1: Proper operation of the YARD FORCE LSC21P-JP for high branch pruning.
Figure 5.2: Demonstrating the reach and use of the YARD FORCE LSC21P-JP.
6. Huolto
Regular maintenance ensures the longevity and safe operation of your YARD FORCE LSC21P-JP.
- Puhdistus: After each use, remove the battery and clean the saw head, blade, and pole with a dry cloth. Remove any sawdust or debris.
- Terän hoito: Inspect blades for sharpness and damage. Replace dull or damaged blades immediately. Apply a thin layer of rust-preventative oil to the blade after cleaning.
- Akun säilytys: Säilytä akkuja viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista. Älä säilytä täysin tyhjiä akkuja pitkiä aikoja.
- Yleinen tarkastus: Periodically check all screws, bolts, and connections for tightness.
7. Vianmääritys
If you encounter issues with your YARD FORCE LSC21P-JP, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Saha ei käynnisty | Akkua ei ole ladattu tai se on asetettu väärin paikalleen; Turvakytkin ei ole kytkettynä | Charge battery fully and insert correctly; Press safety lock-off button before squeezing trigger |
| Heikentynyt leikkausteho | Dull or damaged blade; Incorrect blade for material | Replace blade; Ensure correct blade type is used for the branch/material |
| Saha pysähtyy käytön aikana | Akku vähissä; Ylikuormitussuoja aktivoitunut | Recharge battery; Reduce cutting pressure, allow motor to cool |
| Liiallinen tärinä | Loose blade; Damaged blade or component | Check blade for secure attachment; Inspect blade and tool for damage and replace if necessary |
8. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Mallinumero | LSC21P-JP |
| Virtalähde | 24V litium-ioniakku |
| Tuotteen mitat | Approx. 305 x 9 x 15 cm (Length x Width x Height) |
| Tuotteen paino | Noin 2.6 kg (pääyksikkö) |
| Säädettävä tangon pituus | Approx. 162 cm to 305 cm |
| Blade Length (Standard) | 21 cm |
| Blade Length (PROSTAR Special) | 30 cm |
| Iskun pituus | 20 mm |
| Aivohalvaus | 0-2700 strokes/minute |
| Max. Leikkaushalkaisija | Noin 15 cm |
| Akun latausaika | Noin 80 minuuttia (pikalataus) |
| Jatkuva toiminta-aika | Approx. 35 minutes (no-load, per battery) |
| Materiaalit | Hartsi, alumiini, teräs jne. |
9. Takuu ja tuki
The YARD FORCE LSC21P-JP main unit comes with a 1 vuoden takuu from the date of purchase, as specified in the included Japanese instruction manual and warranty card.
For warranty claims, technical support, or inquiries regarding replacement parts, please refer to the contact information provided in your warranty documentation or contact the retailer where the product was purchased.
Säilytä ostokuittisi takuun voimassaoloa varten.
