Johdanto
Welcome to the instruction manual for your Transformers Studio Series Voyager Bumblebee 110 Shockwave action figure. This figure is designed for collectors and enthusiasts aged 8 and up, offering intricate detail and multiple modes of play. Shockwave, a formidable Decepticon, can convert between his robot form and a Cybertronian tank. This manual provides essential information for assembly, operation, and care of your figure.
Turvallisuustiedot
Varoitus: Tukehtumisvaara – Saattaa sisältää pieniä osia. Ei alle 3-vuotiaille lapsille.
Please keep all packaging materials away from children. Inspect the figure regularly for any loose or damaged parts. Do not attempt to force transformation steps if resistance is met, as this may cause damage to the figure.
Mitä laatikossa on
- Transformers Studio Series Voyager Bumblebee 110 Shockwave Figure
- 2-piece Cannon Accessory
- Irrotettava tausta
- Ohjeet (tämä käyttöohje)
Figure packaging, displaying the product and its key features.
Asennus
Your Transformers Shockwave figure comes pre-assembled in robot mode. No initial assembly is required beyond removing it from the packaging.
Attaching the Cannon Accessory
- Locate the two pieces of the cannon accessory.
- Align the connection points and firmly press the two pieces together until they click into place, forming a single cannon.
- Attach the assembled cannon to Shockwave's left arm by aligning the peg on the cannon with the port on the figure's arm. Ensure a secure fit.
Shockwave figure with its signature cannon accessory attached to the arm.
Using the Removable Backdrop
The included backdrop can be used to display your Shockwave figure in the Cybertron Falls scene, enhancing its visual appeal for display purposes.
- Carefully remove the backdrop from its packaging.
- Unfold the backdrop and place it behind the figure to recreate the iconic scene.
The back of the packaging illustrates the figure's two modes and the included backdrop.
Operating the Figure (Transformation)
The Transformers Studio Series 110 Shockwave figure converts between robot and Cybertronian tank modes in 22 steps. Follow these general guidelines for transformation. Refer to the detailed instructions included in the box for specific step-by-step visuals.
Robot Mode to Cybertronian Tank Mode
Shockwave in Robot Mode.
- Begin with the figure in robot mode.
- Carefully detach the cannon accessory from the arm if it is attached.
- Manipulate the arms and legs, folding and rotating them according to the included visual instructions to form the tank's chassis.
- Fold the head and torso components to conceal them within the tank's structure.
- Reattach the cannon accessory to the designated port on the tank mode, typically on the top.
- Ensure all panels and tabs are securely locked into place for a stable tank mode.
Shockwave in Cybertronian Tank Mode.
Cybertronian Tank Mode to Robot Mode
To convert back to robot mode, reverse the steps outlined above. Pay close attention to the locking mechanisms and panel alignments to ensure a smooth transformation.
Huomautus: Some steps may require gentle force. If a part does not move easily, re-check the previous steps to ensure correct alignment. Do not apply excessive force.
Huolto
- Puhdistus: Wipe the figure with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the paint or plastic.
- Varastointi: Säilytä figuuria viileässä, kuivassa paikassa, poissa suorasta auringonvalosta, jotta se ei värjäydy tai materiaali heikkene.
- Nivelten hoito: If joints become stiff, gently work them back and forth. Avoid applying lubricants, as they may attract dust or damage the plastic.
Vianetsintä
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Figure parts not aligning during transformation. | Incorrect previous step or misaligned tab/slot. | Review the transformation steps carefully. Ensure all tabs are aligned with their corresponding slots before applying pressure. |
| Joints are too loose or too stiff. | Normaalia kulumista tai valmistusvaihteluita. | For loose joints, a small amount of clear nail polish or super glue applied to the joint and allowed to dry can add friction. For stiff joints, gently work them back and forth. Do not force. |
| Accessory does not fit securely. | Incorrect orientation or debris in the port. | Ensure the accessory is oriented correctly. Check the port and peg for any obstructions and clear them if necessary. |
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Tuotteen mitat | 3.15 x 6.3 x 9.06 tuumaa |
| Tuotteen paino | 12.3 unssia |
| Tuotteen mallinumero | F8767 XNUMX |
| Valmistajan suosittelema ikä | 8 vuotta ja ylöspäin |
| Julkaisupäivä | 12. huhtikuuta 2024 |
| Kieli | englanti |
| Valmistaja | Hasbro |
Viralliset tuotevideot
Seuraava video tarjoaa yleiskuvanview of the Transformers Studio Series Voyager Bumblebee 110 Shockwave figure, showcasing its features and transformation.
Tälle tuotteelle ei ole tällä hetkellä saatavilla virallisia myyjävideoita.
Takuu ja tuki
Lisätietoja tuotteen takuusta, palautuksista tai teknisestä tuesta saat valmistajan virallisesta websivustolta tai ota yhteyttä heidän asiakaspalveluunsa. Säilytä ostokuittisi mahdollisten takuuvaatimusten varalta.
Valmistaja: Hasbro
Lisätietoja saat osoitteesta Transformers Store on Amazon.
