1. Johdanto
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Sunco LED Shop Light. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for indoor use in environments such as garages, workshops, basements, and warehouses.
2. Turvallisuustiedot
- Katkaise aina virta ennen asennusta tai huoltoa.
- Varmista, että virtalähde voltage matches the product's requirements (120V).
- Älä yritä muokata tai purkaa laitetta. Siinä ei ole käyttäjän huollettavia osia.
- Vältä suoraa valonlähteen altistumista silmille valaistuksen aikana.
- Asenna kansallisten ja paikallisten sähkömääräysten mukaisesti.
- This fixture is for indoor use only and is not water resistant.
- Pidä erillään syttyvistä materiaaleista.
3. Pakkauksen sisältö
Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:
- LED Shop Light Fixture (48 inches)
- 5 jalkaa virtajohto
- 10-inch Pull Chain Switch
- Mounting Chains (for suspension mount)
- Screws and Anchors (for surface mount)
- Linkable Connectors (for daisy-chaining multiple units)
Kuva 3.1: Package contents showing the LED shop light, power cord, pull chain, mounting chains, screws, and anchors for installation.
4. Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallinumero | SH_F-WH-40W-5K-1PK |
| Mitat (P x L x K) | 47.24 cm x 3.19 cm x 1.77 cm |
| Paino | 1.55 puntaa |
| Wattage | 40W |
| Kirkkaus | 4500 lumenia |
| Värilämpötila | 5000K Daylight (Cool White) |
| Voitage | 120V |
| Materiaali | Plastic (Polycarbonate Shade) |
| Asennustyyppi | Surface Mount, Ceiling Mount (Suspension) |
| Valvontamenetelmä | Vedä ketjua |
| Sisä-/ulkokäyttö | Sisätiloissa |
| Keskimääräinen elämä | 50,000 tuntia |
| Sertifikaatit | Energy Star, ETL, FCC |
Kuva 4.1: Product dimensions of the LED shop light.
5. Asennus
The Sunco LED Shop Light offers two primary installation methods: Surface Mount and Hanging Mount. Choose the method best suited for your application.
5.1. Pinta-asennus
For a flush installation directly against a ceiling or wall surface.
- Merkin kiinnityspisteet: Use the fixture as a template to mark the desired screw locations on the mounting surface. Ensure these points align with the fixture's mounting holes.
- Poraa ohjausreiät: Drill pilot holes at the marked locations. If mounting into drywall, insert the provided anchors.
- Turvallinen kiinnitys: Align the fixture with the pilot holes/anchors and secure it using the provided screws.
- Liitä virta: Plug the 5-foot power cord into a standard 120V outlet.
Kuva 5.1: Step-by-step guide for surface mount installation.
5.2. Hanging Mount Installation
For suspending the fixture from the ceiling using chains.
- Install Eye Hooks: Screw the provided eye hooks into a sturdy ceiling joist or appropriate anchor points. Ensure they are spaced correctly to support the fixture evenly.
- Kiinnitä ketjut: Connect the mounting chains to the eye hooks and to the fixture's hanging points. Adjust chain length to achieve the desired height.
- Liitä virta: Plug the 5-foot power cord into a standard 120V outlet.
Kuva 5.2: Illustration of surface mount and hanging mount installation methods.
5.3. Linkability (Daisy-Chain)
This LED shop light is designed for daisy-chaining, allowing you to connect up to 4 units from a single power source for extended lighting coverage.
- Connect First Fixture: Install the first fixture using either surface or hanging mount and connect its power cord to an outlet.
- Link Additional Fixtures: Use the provided linkable connectors to connect the output end of the first fixture to the input end of the second fixture. Repeat for up to 4 fixtures.
- Secure Linked Fixtures: Ensure all linked fixtures are securely mounted using the appropriate method.
Kuva 5.3: Multiple linked LED shop lights providing extended illumination.
Video 5.1: Yliview of the LED Utility Shop Light, demonstrating its features and installation options, including linkability.
6. Käyttö
To operate the Sunco LED Shop Light:
- Varmista, että kiinnityslaite on asennettu oikein ja kytketty virtalähteeseen.
- Pull the attached chain switch to turn the light ON or OFF.
7. Huolto
The Sunco LED Shop Light requires minimal maintenance.
- Puhdistus: Katkaise virta ennen puhdistusta. Pyyhi laite pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
- Polttimon vaihto: The LED tubes are integrated and not user-replaceable. The fixture has an average lifespan of 50,000 hours.
- Tarkastus: Periodically inspect the power cord and mounting hardware for any signs of damage or wear.
8. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Valo ei syty. | Ei virtaa, löysä liitos, viallinen kytkin. | Check power outlet, ensure power cord is securely plugged in, verify pull chain switch is functioning. |
| Valo välkkyy. | Epävakaa virransyöttö, löysä liitäntä. | Check power source stability, ensure all connections are tight. |
| Not all linked lights illuminate. | Loose linkable connector, exceeding maximum linked units. | Ensure all linkable connectors are secure. Do not exceed 4 linked units. |
9. Takuu ja tuki
Sunco Lighting offers industry-leading coverage and support for its products. This product is backed by Sunco+ Benefits, providing 7+ years of protection.
For technical assistance, warranty claims, or any questions regarding your Sunco LED Shop Light, please contact our dedicated support team based in the USA. Refer to the product packaging or the official Sunco Lighting websivustolta ajantasaiset yhteystiedot.
Video 9.1: An introductory video about Sunco Lighting, highlighting their commitment to quality and customer support.