ANCEL AD530 OBD2 Scanner and BM200 Pro Battery Monitor Instruction Manual

1. Tuote ohiview

The ANCEL AD530 is a full-function OBD2 diagnostic tool designed for all vehicles. It provides comprehensive diagnostic capabilities to help identify and resolve vehicle issues efficiently.

Kuva 1: ANCEL AD530 displaying its full range of OBD2 functions, including reading and erasing DTCs, I/M readiness, live data stream, O2 sensor test, on-board monitor, EVAP system test, freeze frame, DTC lookup, vehicle information, battery test, and VIN information.

Keskeisiin toimintoihin kuuluvat:

• Read & Erase DTCs: Retrieve and clear Diagnostic Trouble Codes.
• I/M-valmiustesti: Check emission-related systems' readiness status.
• Live-datavirta: View real-time sensor data.
• O2-anturikoe: Monitor and test oxygen sensors.
• Sisäänrakennetun näytön testi: Käytä ajoneuvon sisäisten diagnostiikkatestien tuloksia.
• Höyrystymisjärjestelmän testi: Aloita haihtumispäästöjärjestelmän testi.
• Pysäytyskehystiedot: View vehicle parameters recorded when an emission-related fault occurs.
• DTC-haku: Built-in library for code definitions.
• Ajoneuvon tiedot: Hae VIN-, CIN- ja CVN-koodit.
• Akkutesti: Basic battery voltage tarkista.

2. Asennus ja yhteys

To begin using the ANCEL AD530, connect it to your vehicle's OBD2 port. The port is typically located under the dashboard on the driver's side.

1. Locate the 16-pin OBD2 Data Link Connector (DLC) in your vehicle.
2. Plug the AD530's OBD2 cable into the vehicle's DLC.
3. Laite käynnistyy automaattisesti.

3. Operating the ANCEL AD530

Navigate the AD530 using the directional buttons and the "OK" button. The "ESC" button returns to the previous menu, and the "I/M" button provides quick access to I/M Readiness status.

3.1. Emission Test Readiness (I/M Readiness)

Kuva 2: The ANCEL AD530 showing the I/M Readiness screen, indicating the status of various emission monitors (e.g., IGN, MIS, FUEL, CCM, CAT, EVAP, O2S, AIR, HTR, EGR) with checkmarks for 'Ready' and crosses for 'Not Ready'.

This function checks if your vehicle's emission systems are ready for an inspection. A green checkmark indicates the monitor has completed its diagnostic cycle, while a red 'X' means it has not. This helps ensure your vehicle passes exhaust emission tests.

3.2. Vikakoodien lukeminen ja poistaminen

1. From the main menu, select "OBDII" and press "OK".
2. Valitse "Lue koodit" view nykyiset, odottavat ja pysyvät diagnostiikkakoodit (DTC:t).
3. To clear codes, select "Erase Codes". Huomautus: Clearing codes will also clear freeze frame data and reset I/M readiness monitors. Ensure you have addressed the underlying issue before clearing codes.

3.3. Battery Health Status Check

Kuva 3: The ANCEL AD530 showing a real-time graph of battery voltage, indicating normal and abnormal states with corresponding voltage ranges. This helps in monitoring the vehicle's battery health.

The AD530 can display real-time battery voltage, providing a quick assessment of your vehicle's battery health. This feature helps in identifying potential battery issues early.

1. Tuote ohiview

The ANCEL BM200 Pro is a wireless battery monitor designed to provide continuous, real-time monitoring of your vehicle's 12-volt lead-acid battery. It offers multiple test functions and features for comprehensive battery health management.

Kuva 4: The ANCEL BM200 Pro display unit illustrating its multi-test functions, including Battery Test, Cranking Test, Charging Test, Voltage Test, State of Health (SoH), State of Charging (SoC), and Temperature Display.

Key features and functions include:

• Akkutesti: Assesses overall battery health.
• Käynnistystesti: Evaluates the starting system performance.
• Lataustesti: Monitors the alternator's charging output.
• Voitage Testi: Reaaliaikainen voltage seuranta.
• State of Health (SoH) & State of Charging (SoC): Provides detailed battery status.
• Lämpötilanäyttö: Monitors battery temperature.
• 433 MHz:n langaton lähetys: Stable and convenient data transmission up to 70 feet.
• Built-in Alarm Function: Hälytykset akun epänormaalista kunnosta.
• Two Charging Modes: Solar and Type-C for the display unit.
• IP67 vedenpitävä muotoilu: Varmistaa kestävyyden erilaisissa olosuhteissa.
• Palonsuoja-aine: Enhanced safety.
• Alhainen virrankulutus: Efficient operation with automatic connection.
• Tietoturva: Reverse connection, overheat, short circuit protection, and built-in fuse.
• Built-in Shock Sensor: Automatic sleep mode to save power.

2. Asennus

Proper installation of the BM200 Pro monitor unit is crucial for accurate data collection and reliable wireless transmission.

Kuva 5: Visual guide for the four installation steps of the ANCEL BM200 Pro: 1. Connect black clip to negative terminal. 2. Connect red clip to positive terminal. 3. Stick the monitor unit onto the battery surface. 4. Place the display unit in front of the windshield.

1. Yhdistä negatiivinen: Firmly connect the black clip of the monitor unit to the negative (-) pole of the vehicle battery.
2. Yhdistä positiivisesti: Firmly connect the red clip of the monitor unit to the positive (+) pole of the vehicle battery.
3. Mount Monitor Unit: Stick the monitor unit onto the battery surface using the provided double-sided tape.
4. Position Display Unit: Place the display unit in a suitable location on your dashboard, typically in front of the windshield, ensuring clear visibility and optimal wireless reception.

Tärkeitä vinkkejä:

• Ensure the device is securely installed for the first time. Loose installation may cause abnormal data capture and display.
• Verify the RF signal icon in the upper right corner of the display. A visible RF symbol indicates the display is successfully connected to the monitor unit and is receiving real-time data. If the RF symbol does not appear, try restarting the display unit.

3. Operating the ANCEL BM200 Pro

The BM200 Pro continuously monitors your battery and transmits data wirelessly to the display unit. The display provides real-time information and alerts.

3.1. Battery Test Functions

The display unit shows various battery parameters:

• Akkutesti: Provides an overall assessment of battery health, often displayed as a percentage (SoH).
• Käynnistystesti: When the engine starts, the device automatically tests the cranking system, displays the cranking voltage, and determines if the starting process is abnormal.
• Lataustesti: After the car starts, it monitors the charging system, displays the charging percentage in real-time, and assesses the alternator's working condition.
• Voitage Testi: Continuously monitors battery voltage, helping to predict potential battery maintenance issues.

3.2. Wireless Transmission

Kuva 6: The ANCEL BM200 Pro demonstrating its 433MHz wireless transmission capability, allowing stable data transfer between the battery monitor and the display unit over a distance of 30-70 feet.

The BM200 Pro utilizes 433MHz wireless transmission technology, offering a stable connection and convenient monitoring from a distance of 30 to 70 feet. This allows for effective battery monitoring even when outside the vehicle.

3.3. Built-in Alarm Function

Kuva 7: The ANCEL BM200 Pro's built-in alarm function, highlighting alerts for low voltage, low battery, high temperature, abnormal cranking, and abnormal charging, providing timely warnings for proactive maintenance.

The device provides timely automatic alerts for abnormal data, including:

• Alhainen tilavuustage
• Akku vähissä
• Korkea lämpötila
• Abnormal cranking
• Epänormaali lataus

These alerts help ensure proactive maintenance and prevent unexpected battery failures.

3.4. Charging the Display Unit

Kuva 8: The ANCEL BM200 Pro display unit illustrating its two charging modes: solar charging via the integrated panel and Type-C charging (5V charger) for simultaneous power replenishment.

The BM200 Pro display unit supports two charging methods:

• Aurinkoenergian lataus: The integrated solar panel allows for continuous charging when exposed to sunlight.
• Type-C lataus: Connect a 5V Type-C charger for faster or indoor charging.