Nora NMP2-LED30B Josh LED-kiekkovalaisimen käyttöohje

1. Johdanto

The Nora NMP2-LED30B Josh LED Puck Light is a versatile, low-profile lighting solution designed for accent, under-cabinet, in-cabinet, niche, and jewelry case applications. Its slim design allows for installation in limited spaces, providing excellent and even illumination without producing a diode image. This fixture can be either recessed or surface mounted and is dimmable with a compatible dimmable power supply. It features LED technology that eliminates forward heat, UV, and infrared rays, making it safe for heat-sensitive items.

Tärkeimmät ominaisuudet:

• Compact design: 0.57 inches deep with a 2.72-inch diameter.
• Flexible installation: Recessed or Surface Mount options.
• Dimmable with appropriate power supply.
• Instant illumination: No flicker, delay, or warm-up time.
• No diode image, UV, or infrared wavelengths.
• cULus Listed for safety.

2. Turvallisuustiedot

Lue kaikki ohjeet huolellisesti ennen asennusta ja käyttöä. Säilytä tämä käyttöohje myöhempää tarvetta varten.

• Sähköturvallisuus: Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved. Disconnect power at the fuse or circuit breaker before installation or servicing.
• Voitage: This product operates on 24V DC. Ensure you use a compatible 24V DC power supply (sold separately). Connecting to an incorrect voltage will damage the unit and void the warranty.
• Ympäristö: For indoor use only. Do not expose to water or excessive moisture.
• Lämpö: Do not cover the fixture with materials that may restrict airflow, as this can lead to overheating.
• Muutokset: Do not attempt to modify or disassemble the fixture. This will void the warranty and may pose a safety risk.

3. Pakkauksen sisältö

Varmista, että kaikki osat ovat mukana ennen asennuksen aloittamista:

• 1 x Josh LED Puck Light
• 1 x 72-inch wire with connector

Huomautus: A 24V DC power supply and dimmer (if dimming functionality is desired) are required and sold separately.

4. Asennus ja asennus

The Josh LED Puck Light can be installed as either a recessed or surface-mounted fixture. Choose the method that best suits your application.

4.1. Asennus ohiview

Kuva 1: Etuosa view of the Nora Josh LED Puck Light, showcasing its black finish and diffused light surface.

Kuva 2: Ylhäältä alas view of the Nora Josh LED Puck Light, highlighting its circular design and even light distribution.

4.2. Mitat ja asennusvaihtoehdot

Figure 3: Detailed dimensional drawing illustrating the specifications for both recessed and surface mounting options. The recessed mount requires a 2.5-inch cutout (without mounting bracket) or 2.74-inch (with mounting bracket) and has a depth of 0.06 inches. The surface mount has a depth of 0.57 inches and a diameter of 2.72 inches.

4.3. Recessed Mount Installation

1. Valmistele pinta: Ensure the mounting surface is clean and free of obstructions.
2. Leikkaus: Based on Figure 3, create a circular cutout in the desired location. For recessed mounting, the cutout diameter is approximately 2.5 inches (without mounting bracket) or 2.74 inches (with mounting bracket).
3. Johdotus: Route the 72-inch wire from the puck light through the cutout. Connect the wire to a compatible 24V DC power supply (not included). Ensure polarity is correct.
4. Aseta kiinnitys: Gently push the puck light into the cutout until it sits flush with the surface. The spring clips (if present) will secure it.

4.4. Pinta-asennus

1. Valmistele pinta: Ensure the mounting surface is clean and free of obstructions.
2. Merkin kiinnityspisteet: Use the puck light as a template to mark the screw locations for the mounting bracket (if included) or directly for the fixture.
3. Secure Mounting Bracket (if applicable): Attach the mounting bracket to the surface using appropriate screws (not included).
4. Johdotus: Route the 72-inch wire from the puck light to the location of the 24V DC power supply (not included). Connect the wire, ensuring correct polarity.
5. Kiinnitä teline: Secure the puck light to the mounting bracket or directly to the surface using screws.

5. Käyttöohjeet

Once installed and connected to a compatible 24V DC power supply, the Nora Josh LED Puck Light is ready for operation.

• Virta päälle/pois: The light will turn on when power is supplied from the 24V DC power source. Use the switch on your power supply or a connected wall switch to control power.
• himmennys: If connected to a dimmable 24V DC power supply and a compatible dimmer switch (e.g., remote control or app-controlled dimmer), you can adjust the brightness of the puck light. Follow the instructions provided with your specific dimmer and power supply for operation.

6. Huolto

The Nora Josh LED Puck Light requires minimal maintenance.

• Puhdistus: Varmista, että virta on katkaistu ennen puhdistamista. Pyyhi laite pehmeällä, kuivalla tai hieman kostealla liinalla.amp liinalla. Älä käytä hankaavia puhdistusaineita, liuottimia tai voimakkaita kemikaaleja, sillä ne voivat vahingoittaa pintakäsittelyä tai sähkökomponentteja.
• Polttimon vaihto: The LED light source is integrated and not user-replaceable. The average lifespan of the LEDs is 50,000 hours.

7. Vianmääritys

If you encounter issues with your Nora Josh LED Puck Light, refer to the following common problems and solutions:

8. Tekniset tiedot

9. Takuu ja tuki

Jos tarvitset takuutietoja tai teknistä tukea, ota yhteyttä valmistajaan tai ostopaikkaan. Säilytä ostokuitti ostotodistuksena.