Whirlpool WPW10300022 Refrigerator Ice Maker Assembly Instruction Manual

Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of the Whirlpool WPW10300022 SxS Refrigerator Ice Maker Assembly. This genuine OEM part is designed to replace existing ice maker assemblies in compatible Whirlpool side-by-side refrigerators, ensuring optimal performance and longevity of your appliance.

The ice maker assembly is responsible for receiving water, freezing it into ice cubes, and automatically ejecting them into the ice storage bin. This particular model produces 8-cube ice. Replacing a malfunctioning ice maker can resolve issues such as flaking coating or component failure within the assembly.

Tärkeitä turvallisuustietoja

VAROITUS: Before attempting any installation or repair, always ensure the refrigerator is completely disconnected from its power source. Unplug the appliance or shut off the house circuit breaker. Additionally, turn off the refrigerator's water supply to prevent water damage or electrical hazards.

Basic hand tools and novice repair experience are required for this installation. If you are unsure about any step, it is recommended to consult a qualified service technician.

Tuote loppuview

The Whirlpool WPW10300022 SxS Refrigerator Ice Maker Assembly is a genuine OEM replacement part. It includes:

• (3) Wiring harnesses
• (1) Ice bin assembly
• (2) Kiinnityspidikkeet

Huomautus: This assembly does not include a bail arm. The bail arm from your existing ice maker must be removed and reused with the new part.

Image: Whirlpool WPW10300022 Ice Maker Assembly, front view.

Yhteensopivuus

This ice maker assembly is compatible with various Whirlpool side-by-side refrigerator models featuring in-door ice and water dispensers. Compatible models include, but are not limited to:

• Whirlpool WRS325FDAM
• Whirlpool WRS325SDHZ
• Whirlpool WRS321SDHZ
• Whirlpool WRS315SDHZ
• Whirlpool WRS322FDAM

This part replaces previous part numbers W10122556, W10300022, and W10377190.

Asennusohjeet

Tarvittavat työkalut:

• Basic hand tools (e.g., screwdriver, nut driver)

Asennusta edeltävät vaiheet:

1. Katkaise virta: Unplug the refrigerator from the electrical outlet or turn off the circuit breaker for the appliance at your home's main electrical panel.
2. Vedenjakelun sulkeminen: Locate the water shut-off valve for the refrigerator (usually behind the unit or under the sink) and turn it off.
3. Jääpalakoneen käyttö: Open the freezer door and locate the existing ice maker assembly.

Removing the Old Ice Maker:

4. Remove Ice Bin: Carefully remove the ice storage bin from beneath the ice maker.
5. Irrota johdot: Disconnect the wiring harnesses connected to the old ice maker. Note their positions for re-connection.
6. Irrota kiinnitysruuvit: Unscrew any mounting screws or clips securing the old ice maker to the freezer wall.
7. Detach Bail Arm: If your old ice maker has a bail arm, carefully detach it. This part will be reused.
8. Vanhan jääpalakoneen poistaminen: Gently pull the old ice maker assembly out of the freezer compartment.

Installing the New Ice Maker:

9. Attach Bail Arm: Attach the bail arm removed from the old ice maker to the new WPW10300022 assembly.
10. Position New Ice Maker: Carefully slide the new ice maker assembly into its position in the freezer.
11. Secure Mounting Clips/Screws: Use the provided mounting clips or screws to secure the new ice maker to the freezer wall. Ensure it is firmly in place.
12. Kytke johdotus: Reconnect the three wiring harnesses to the new ice maker. Ensure all connections are secure.
13. Vaihda jääastia: Place the ice storage bin back into its position beneath the new ice maker.

Asennuksen jälkeiset vaiheet:

14. Palauta vedenjakelu: Kytke jääkaapin vesihana takaisin päälle.
15. Palauta virta: Plug the refrigerator back into the electrical outlet or turn the circuit breaker back on.
16. Käyttöönotto: The ice maker will typically begin its first cycle within a few hours. Discard the first few batches of ice to ensure cleanliness and proper function.

Image: Whirlpool WPW10300022 Ice Maker Assembly, showing wiring harnesses.

Toiminta

Once installed and connected, the ice maker operates automatically. It will fill with water, freeze the water into 8-cube ice, and then eject the ice into the storage bin. The bail arm acts as a sensor; when the ice bin is full and the bail arm is lifted by the ice, the ice maker will temporarily stop production until more ice is used.

Image: Whirlpool WPW10300022 Ice Maker Assembly, showing the ice bin component.

Huolto

Regular maintenance helps ensure the longevity and efficiency of your ice maker:

• Puhdas jääastia: Periodically empty and clean the ice storage bin with mild soap and water. Rinse thoroughly and dry before returning it to the freezer.
• Tarkista vedensuodatin: Varmista, että jääkaapin vesisuodatin vaihdetaan valmistajan suositusten mukaisesti veden laadun ylläpitämiseksi ja mineraalien kertymisen estämiseksi jääpalakoneeseen.
• Tarkista vuodot: Tarkista aika ajoin jääpalakoneen tai vesijohtojen ympärillä merkkejä vesivuodoista.

Vianetsintä

Tekniset tiedot

• Mallinumero: WPW10300022
• Osan tyyppi: SxS Refrigerator Ice Maker Assembly
• Ice Cube Type: 8-cube
• Materiaali: Muovi, ruostumaton teräs
• Tuotteen paino: 3.3 kiloa
• Tuotteen mitat: 14.5 x 7.63 x 7.25 tuumaa
• Mukana tulevat komponentit: 1 SxS Refrigerator Ice Maker Assembly (includes 3 wiring harnesses, 1 ice bin assembly, 2 mounting clips)
• Korvaa osanumerot: W10122556, W10300022, W10377190

Takuutiedot

This Whirlpool Genuine OEM part comes with a 1 vuoden rajoitettu takuu. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your purchase or contact Whirlpool customer support.

Tuki ja palvelu

For further assistance, troubleshooting, or to purchase additional genuine Whirlpool parts, please visit the official Whirlpool website or contact their customer service department. Always ensure you are using genuine OEM parts for optimal performance and to maintain your appliance's warranty.