Zinus Yelena Queen Steel Bed Frame Instruction Manual

Tärkeitä turvallisuustietoja

• Painorajoitus: Do not exceed the maximum weight limit of 318 kg (700 lbs). This includes the mattress and occupants.
• Full Assembly: Ensure the bed frame is fully assembled according to the instructions before any use.
• Turvalliset kiinnikkeet: Verify all bolts, screws, and connections are securely fastened before placing a mattress on the frame and periodically thereafter.
• Lapset: Pidä lapset poissa kokoamisalueelta. Pienet osat voivat aiheuttaa tukehtumisvaaran.

1. Asennus ja kokoonpano

The Zinus Yelena bed frame is designed for straightforward assembly. All necessary parts, tools, and instructions are included to complete the setup in under one hour.

1.1 Pakkauksen purkaminen ja osien tunnistaminen

Carefully unpack all components from the box. Lay them out on a clean, soft surface to prevent scratches. Refer to the included parts list to identify each component.

Image 1.1: All components of the Zinus Yelena Queen Steel Bed Frame before assembly.

1.2 Frame Assembly Steps

1. Connect the side rails to the head and foot sections using the provided bolts and the included wrench. Do not fully tighten bolts until all sections are aligned.
2. Attach the center support beam(s) to the designated points on the side rails.
3. Insert the steel slats into the frame. Ensure they are evenly spaced and securely seated in their respective slots.
4. Once all parts are in place, systematically tighten all bolts. Ensure the frame is stable and level.

Image 1.2: Detail of a leg connection point, illustrating the secure fastening mechanism.

1.3 Headboard Attachment (Optional)

The frame includes pre-drilled holes on the two legs, allowing for easy attachment to any standard-sized headboard. Align the headboard brackets with these holes and secure with appropriate hardware (not included).

2. Käyttö ja ominaisuudet

2.1 Patjan sijoitus

Place your Queen-sized mattress directly onto the steel slats. A box spring is not required for this bed frame.

2.2 Noise Minimization

The steel slats are engineered to minimize noise during use, contributing to a quiet sleep environment. This design also helps to prolong the life of your mattress by providing consistent support.

Kuva 2.1: Alapuoli view of the bed frame, highlighting the robust steel slat system designed for mattress support and noise reduction.

2.3 Säilytystilaa vuoteen alla

The frame provides 30 cm (approximately 11.8 inches) of clearance between the base and the floor. This ample space is suitable for storing various items, such as storage bins, luggage, or seasonal clothing.

Image 2.2: The bed frame demonstrating the available under-bed storage space, with storage boxes placed beneath.

3. Huolto

Regular maintenance ensures the longevity and continued performance of your Zinus Yelena bed frame.

• Puhdistus: Pyyhi metallikehys mainoksellaamp liinalla ja miedolla pesuaineella tarpeen mukaan. Vältä hankaavia puhdistusaineita tai voimakkaita kemikaaleja, jotka voivat vahingoittaa pintaa.
• Kiinnittimen tarkistus: Periodically (e.g., every 3-6 months), inspect all bolts and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability and prevent noise.
• Säleiden tarkastus: Check the steel slats for any signs of damage or displacement. Ensure they are properly seated to provide optimal mattress support.

4. Vianmääritys

Jos sängynrungossa on ongelmia, katso seuraavat yleiset vianmääritysvinkit:

4.1 Narina tai melu

• Kiristä pultit: The most common cause of noise is loose fasteners. Re-tighten all bolts on the frame, paying close attention to the leg and rail connections.
• Tarkista säleet: Ensure all steel slats are correctly positioned and fully seated in their holders. Misaligned slats can cause friction and noise.
• Mattress Interaction: Sometimes, noise can come from the mattress rubbing against the frame. Try repositioning the mattress.

4.2 Epävakaus tai heiluminen

• Re-check Assembly: Review the assembly instructions to ensure all steps were followed correctly and no parts were omitted or incorrectly installed.
• Taso pinta: Ensure the bed frame is placed on a flat, level surface. Uneven flooring can cause wobbling.
• All Fasteners Tight: Double-check that every bolt and screw is fully tightened.

5. Tekniset tiedot

Kuva 5.1: Yliulotteinenview of the Zinus Yelena Queen Steel Bed Frame.

6. Takuutiedot

The Zinus Yelena Queen Steel Bed Frame comes with a 5 vuoden rajoitettu takuu ostopäivästä lukien. Tämä takuu kattaa materiaalien ja työn laadun virheet normaalissa käytössä.

The warranty does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear. Any modifications to the product will void the warranty.

Säilytä ostokuitti takuuvaatimuksia varten.

7. Asiakastuki

For any questions regarding assembly, missing parts, warranty claims, or general inquiries, please contact Zinus customer support.

• Websivusto: Visit the official Zinus websivusto tukiresursseja ja yhteydenottovaihtoehtoja varten.
• Sähköposti: Refer to your product packaging or the Zinus websivusto suoraa sähköpostitukea varten.
• Puhelin: Contact numbers for customer service can be found on the Zinus websivusto.

When contacting support, please have your model number (AO-MPSC-14Q) and proof of purchase readily available.