1. Johdanto
This manual provides comprehensive instructions for the installation, operation, and maintenance of your TELEVES 545801 F-Type 3-Output VHF/UHF Auto LTE Housing Amplifier. This device is designed to boost television signals (VHF/UHF) within a domestic environment, distributing them to up to three outputs, and features automatic LTE interference filtering for optimal signal quality.
Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the performance and longevity of your ampelävämpi.
2. Tuote ohiview
The TELEVES 545801 is an indoor domestic TV amplifier engineered to enhance and distribute terrestrial television signals. It features one input for the antenna signal and three F-type outputs for connecting to multiple televisions or tuners. The integrated Auto LTE filter automatically adapts to block interference from 4G/5G mobile signals, ensuring a clear and stable TV reception.
Kuva 1: Etuosa view of the TELEVES 545801 amplifier, showing the F-type input and three F-type output connectors, along with the power input. The "Televes" brand name is visible on the casing.
Figure 2: The TELEVES 545801 amplifier shown in its retail packaging, which highlights its key features: VHF/UHF compatibility, 3 outputs (2+TV), F-connector type, and LTE filtering. A power cable is also visible within the packaging.
3. Turvallisuusohjeet
- Lue kaikki ohjeet huolellisesti ennen asennusta ja käyttöä.
- Älä altista laitetta sateelle, kosteudelle tai äärimmäisille lämpötiloille.
- Varmista virtalähteen voltage vastaa laitteen etiketissä määritettyjä vaatimuksia.
- Älä avaa ampelinkaari casing. Sisällä ei ole käyttäjän huollettavia osia. Koneen avaaminenasing mitätöi takuun.
- Asenna amplifier in a well-ventilated area, away from heat sources.
- Irrota virtalähde ennen minkäänlaisten kytkentöjen tai irrotustestien tekemistä.
- Pidä poissa lasten ulottuvilta.
4. Pakkauksen sisältö
Varmista, että pakkauksessa on kaikki tarvittavat osat:
- TELEVES 545801 F-tyypin 3-ulostuloinen VHF/UHF-auto-LTE-kotelo Ampelävämpi
- Virtasovitin/kaapeli
- Käyttöopas (tämä asiakirja)
5. Asennusohjeet
Follow these steps to install your TELEVES 545801 ampelävämpi:
- Valitse sijainti: Select a dry, indoor location close to your antenna's signal input point and your televisions. Ensure adequate ventilation.
- Connect Antenna Input: Connect the coaxial cable from your antenna (or wall outlet providing the antenna signal) to the INPUT F-type connector on the ampVarmista, että liitäntä on tukeva.
- Connect TV Outputs: Connect coaxial cables from the three OUTPUT F-type connectors on the amplifier to the antenna inputs of your televisions or tuners. Secure all connections.
- Liitä virta: Plug the power adapter/cable into the amplifier's power input port, then plug the other end into a standard electrical outlet.
- Virta päälle: The amplifier will power on automatically. There are no external switches.
- Etsi kanavia: Perform a channel scan on each connected television or tuner to detect available channels with the boosted signal.
Note: The Auto LTE feature automatically filters out interference from 4G/5G mobile signals, requiring no manual adjustment.
6. Käyttöohjeet
The TELEVES 545801 amplifier operates automatically once powered on. It continuously amplifies the incoming VHF/UHF signals and filters out LTE interference. No user intervention is required for its normal operation.
- Varmista, että amplifier remains powered for continuous signal amplifiointi.
- If you experience signal issues, refer to the Troubleshooting section.
7. Huolto
The TELEVES 545801 amplifier requires minimal maintenance:
- Puhdistus: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the exterior of the ampÄlä käytä nestemäisiä puhdistusaineita tai hankaavia aineita.
- Ympäristö: Varmista, että amplifier is kept in a dry, indoor environment, away from direct sunlight, excessive heat, and moisture.
- Liitännät: Periodically check all F-type connections to ensure they are secure. Loose connections can degrade signal quality.
8. Vianmääritys
Jos kohtaat ongelmia amplifier, consult the following table:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| No signal or poor signal quality on TV. |
|
|
| Intermittent signal or pixelation. |
|
|
If the problem persists after trying these solutions, please contact TELEVES customer support.
9. Tekniset tiedot
| Merkki | TELEVES |
| Mallinumero | 545801 |
| Viitenumero | 545801 |
| Tulotaajuusalue | VHF/UHF |
| Lähdöt | 3 (2+TV) |
| Liittimen tyyppi | F-tyyppi |
| LTE-suodatus | Automaattinen |
| ASIN | B0B135VL23 |
| Varaosien saatavuus | Tietoja ei ole saatavilla |
| Päivämäärä ensimmäinen saatavilla | 9. toukokuuta 2022 |
10. Takuu ja tuki
TELEVES products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official TELEVES websivusto.
For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact TELEVES customer service through their official channels. Please have your product model number (545801) and purchase details ready when contacting support.
