1. Johdanto
This manual provides detailed instructions for the ZIOCOM BT4810E Bluetooth 5.0 2-in-1 Transmitter Receiver. This device allows you to add Bluetooth functionality to non-Bluetooth audio devices, enabling wireless audio transmission (TX mode) or reception (RX mode).
Image 1.1: ZIOCOM BT4810E Bluetooth 2-in-1 Transmitter Receiver. This image shows the compact black device with a 3.5mm audio jack cable connected, and a power button on top.
2. Pakkauksen sisältö
Varmista, että pakkauksessasi on kaikki tarvittavat osat:
- 1 x ZIOCOM BT4810E Bluetooth 2-in-1 Transmitter Receiver
- 1 x Micro USB latauskaapeli
- 1 x 3.5 mm audiokaapeli
- 1 x Käyttöohje
Image 2.1: Package Contents. This image displays the ZIOCOM BT4810E unit, a micro USB charging cable, a 3.5mm audio cable, and the user manual, all neatly arranged.
3. Laite loppuview
The ZIOCOM BT4810E features a compact design with essential ports and controls.
Image 3.1: Device and Connectivity Options. This image shows the ZIOCOM BT4810E device alongside various cables including RCA, 3.5mm audio, and USB charging cables, illustrating its versatile connectivity.
Tärkeimmät ominaisuudet:
- 2-in-1-toiminnallisuus: Toimii sekä Bluetooth-lähettimenä (TX) että -vastaanottimena (RX).
- Bluetooth 5.0: Varmistaa vakaan yhteyden ja korkealaatuisen äänensiirron.
- Dual-Link Support: Connects to two Bluetooth headphones in TX mode or two smartphones in RX mode simultaneously.
- Pitkä akun käyttöikä: Built-in 250mAh rechargeable battery provides approximately 10 hours of continuous use. Can operate while charging.
- Kompakti ja kannettava: Pieni ja kevyt helppoon kuljetukseen.
- Monipuoliset liitännät: Supports 3.5mm AUX and RCA audio connections.
Note: This device does not have a built-in microphone and cannot be used for phone calls. It also does not support fiber optic interfaces.
4. Asennus ja käyttö
4.1 Laitteen lataaminen
Before first use, fully charge the ZIOCOM BT4810E. Connect the Micro USB charging cable to the device's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter).
- Täysi lataus kestää noin tunnin.
- Laitetta voi käyttää latauksen aikana.
Image 4.1: Battery Life and Charging. This image illustrates the ZIOCOM BT4810E being charged via a Micro USB cable, highlighting its 250mAh battery and approximately 10 hours of working time.
4.2 Vaihtotilat (TX/RX)
The device has a switch to select between Transmitter (TX) and Receiver (RX) modes. Ensure the correct mode is selected for your intended use.
- TX (lähetin) -tila: For sending audio from a non-Bluetooth device (e.g., TV, PC) to Bluetooth headphones/speakers.
- RX (vastaanotin) -tila: For receiving audio from a Bluetooth device (e.g., smartphone) to non-Bluetooth speakers/car stereo.
4.3 Transmitter (TX) Mode Operation
Use TX mode to wirelessly stream audio from your non-Bluetooth devices to Bluetooth headphones or speakers.
- Aseta laite asentoon TX mode using the switch.
- Connect the ZIOCOM BT4810E to your audio source (e.g., TV, PC, MP3 player) using the 3.5mm audio cable. If your source uses RCA, you will need an RCA to 3.5mm adapter (not included).
- Turn on the ZIOCOM BT4810E. It will automatically enter pairing mode (indicator light will flash).
- Aseta Bluetooth-kuulokkeet tai -kaiutin pariliitostilaan.
- The ZIOCOM BT4810E will automatically search for and connect to your Bluetooth audio device. Once connected, the indicator light will remain solid.
- Dual-Link (TX Mode): To connect a second pair of Bluetooth headphones, put the second headphones into pairing mode after the first pair is connected. The BT4810E will attempt to connect to the second device.
Image 4.2: TX Mode Example (TV). This image shows the ZIOCOM BT4810E connected to a television, transmitting audio wirelessly to a user wearing Bluetooth headphones, allowing private listening.
Image 4.3: Dual-Link TX Mode. A couple is shown watching TV, both wearing Bluetooth headphones connected simultaneously to the ZIOCOM BT4810E, demonstrating its dual-link capability.
4.4 Receiver (RX) Mode Operation
Use RX mode to stream audio wirelessly from your Bluetooth-enabled smartphone, tablet, or laptop to non-Bluetooth speakers or car stereos.
- Aseta laite asentoon RX mode using the switch.
- Connect the ZIOCOM BT4810E to your non-Bluetooth audio device (e.g., wired speakers, car stereo) using the 3.5mm audio cable.
- Turn on the ZIOCOM BT4810E. It will automatically enter pairing mode (indicator light will flash).
- On your smartphone or other Bluetooth device, search for "BT4810E" in the Bluetooth settings and select it to pair.
- Once connected, the indicator light will remain solid. You can now play audio from your Bluetooth device through your connected speakers.
- Dual-Link (RX Mode): To connect a second smartphone, disconnect the first phone, then pair the second phone. The device can remember multiple paired devices, but only one can play audio at a time in RX mode.
Image 4.4: RX Mode Example (Wired Speaker). This image shows the ZIOCOM BT4810E connected to a wired speaker, receiving audio wirelessly from a smartphone.
Image 4.5: RX Mode Applications. This image illustrates the ZIOCOM BT4810E being used in RX mode to connect a smartphone to both a wired speaker and a car stereo, enabling wireless audio streaming in different environments.
5. Huolto
- Pidä laite kuivana. Kosteus voi vahingoittaa sen sisäisiä piirejä.
- Älä altista laitetta äärimmäisille lämpötiloille.
- Puhdista laite pehmeällä, kuivalla liinalla. Vältä voimakkaiden kemikaalien tai hankaavien puhdistusaineiden käyttöä.
- Säilytä laitetta viileässä ja kuivassa paikassa, kun sitä ei käytetä pitkään aikaan.
- Turn off the device after each use to conserve battery life.
6. Vianmääritys
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Laite ei käynnisty. | Akku vähissä. | Charge the device using the Micro USB cable. |
| Ei voi muodostaa pariliitosta Bluetooth-laitteen kanssa. | Device not in pairing mode; Bluetooth device too far; interference. | Ensure the BT4810E is in the correct TX/RX mode and flashing. Move devices closer. Turn off other Bluetooth devices. |
| Ei äänituloa/-lähtöä. | Incorrect cable connection; wrong mode selected; volume too low. | Check 3.5mm cable connection. Verify TX/RX mode. Adjust volume on both devices. |
| Äänen viive/latenssi. | Bluetooth codec limitations. | For optimal low latency, ensure both the BT4810E and your connected audio device support aptX Low Latency. |
| Cannot connect two headphones in TX mode. | Second headphone not in pairing mode or already connected to another device. | Ensure the first headphone is connected, then put the second headphone into pairing mode. |
7. Tekniset tiedot
- Malli: BT4810E
- Bluetooth-versio: 5.0
- Yhteystekniikka: Lisälaite, Bluetooth, RCA
- Virtalähde: Battery Powered (Built-in 250mAh Lithium Polymer battery)
- Työaika: Noin 10 tuntia
- Latausaika: Noin 1 tunti
- Tuotteen mitat: 0.21 x 1.36 x 0.34 tuumaa
- Tuotteen paino: 2.89 unssia
- Erikoisominaisuudet: 2-in-1 Transmitter/Receiver, Dual-Link
8. Takuu ja tuki
Warranty and support information for the ZIOCOM BT4810E is not provided in the available product data. Please refer to the official ZIOCOM website or contact your retailer for specific warranty terms and customer support details.
Lisätietoja saat osoitteesta ZIOCOM Store on Amazon.
