CURT 56471 Ajoneuvon puolelle asennettavan mukautetun 4-napaisen perävaunun johtosarjan käyttöohje

1. Johdanto

This manual provides detailed instructions for the installation, operation, and maintenance of your CURT 56471 Vehicle-Side Custom 4-Pin Trailer Wiring Harness. This harness is designed to provide a standard 4-way flat connector for towing applications on specific Ford Bronco models not equipped with LED taillights. Please read all instructions carefully before beginning installation.

2. Tuote ohiview

The CURT 56471 wiring harness is a custom, vehicle-side electrical device that integrates with your vehicle's existing wiring system to provide a 4-way flat trailer wiring connection. It eliminates the need for cutting or splicing wires during installation.

2.1. Tärkeimmät ominaisuudet

• Easy plug-and-play installation with vehicle-specific connectors.
• Provides a standard 4-way flat connector for trailer tail lights, brake lights, and turn signals.
• Built with surface mount technology for reliable power and optimal light intensity.
• Includes a rubber dust cover for connector protection when not in use.

2.2. Mukana olevat osat

Pakkaus sisältää tyypillisesti seuraavat komponentit:

• T-connector wiring harness with vehicle-specific plugs.
• 4-way flat connector with dust cover.
• Power wire (for battery connection).
• Fuse holder and fuse.
• Ring terminal (for ground connection).
• Cable ties for securing wiring.
• Asennusohjeet.

3. Ajoneuvojen yhteensopivuus

This CURT 56471 wiring harness is specifically designed for select years of the Ford Bronco without LED lights. It is crucial to verify your vehicle's taillight type before installation. This harness is not compatible with Ford Bronco models equipped with LED taillights.

Katso tuotteen pakkauksesta tai valmistajan ohjeista website for a complete list of compatible vehicle years and trims.

4. Asennusohjeet

The installation process involves connecting the T-connector harness to your vehicle's taillight assemblies and routing a power wire to the vehicle battery.

4.1. Tarvittavat työkalut

• Basic hand tools (e.g., screwdriver, wrench set).
• Wire crimpers/strippers.
• Test light or multimeter (optional, for verifying connections).
• Zip ties (additional may be useful).
• Suojalasit.

4.2. Asennusta edeltävät vaiheet

1. Turvallisuus ennen kaikkea: Irrota ajoneuvon akun negatiivinen napa ennen sähkötöiden aloittamista.
2. Access Taillights: Depending on your Ford Bronco model, you may need to remove the taillight assemblies to access the wiring connectors. Consult your vehicle's owner's manual for specific instructions on taillight removal.
3. Tunnista liittimet: Locate the vehicle's taillight wiring connectors. The CURT T-connector will plug directly into these.

4.3. Johtosarjan liitäntä

4. T-liittimien kytkentä: Separate the vehicle's taillight wiring connectors. Insert the corresponding ends of the CURT T-connector harness into the vehicle's wiring, ensuring a secure fit. Repeat for both sides of the vehicle.
5. Route 4-Way Flat: Route the 4-way flat connector end of the harness towards the rear center of the vehicle, where it will connect to the trailer. Secure it using zip ties to prevent it from dragging or getting caught.

4.4. Virta- ja maadoitusliitännät

6. Virtajohdon reititys: Route the included power wire from the harness module to the vehicle's positive battery terminal. Ensure the wire is routed safely away from hot exhaust components, moving parts, and sharp edges. Use zip ties to secure the wire along the vehicle's frame.
7. Asenna sulakepidike: Install the fuse holder as close to the battery as possible. Cut the power wire, crimp the fuse holder into place, and insert the fuse.
8. Maaliitäntä: Connect the white ground wire from the harness to a clean, unpainted metal surface on the vehicle's frame using the provided ring terminal and a self-tapping screw. Ensure a solid ground connection for proper operation.

4.5. Viimeiset vaiheet

9. Suojattu moduuli: Mount the harness module in a dry, secure location using the provided double-sided tape or zip ties.
10. Liitä akku uudelleen: Kytke ajoneuvon akun negatiivinen napa takaisin.
11. Testauksen toiminnallisuus: Connect a trailer or a trailer light tester to the 4-way flat connector and verify that all trailer lights (tail, brake, turn signals) function correctly.

Tärkeää: If your vehicle uses Pulse Width Modulation (PWM) technology for its lights, a powered converter (like the one integrated into this harness) is necessary for proper trailer light function. Do not attempt to tap into wires directly.

5. Käyttö

Once installed, the CURT 56471 harness provides a standard 4-way flat electrical connection for your trailer.

5.1. Perävaunun kytkeminen

1. Ensure the vehicle's engine is off and the parking brake is engaged.
2. Irrota pölysuojus 4-napaisesta litteästä liittimestä.
3. Align the pins of the trailer's 4-way flat connector with the sockets on the vehicle's harness and push firmly to connect.
4. Secure any excess wiring to prevent it from dragging.

5.2. Disconnecting a Trailer

1. Ensure the vehicle's engine is off and the parking brake is engaged.
2. Grasp both connectors firmly and pull them apart. Do not pull on the wires.
3. Replace the dust cover on the vehicle's 4-way flat connector to protect it from dirt and moisture.

6. Huolto

Regular maintenance ensures the longevity and reliable performance of your wiring harness.

• Tarkista liitännät: Periodically check all electrical connections for corrosion, damage, or loose fittings. Clean any corrosion with a wire brush and electrical contact cleaner.
• Pölysuoja: Always use the provided dust cover when the 4-way flat connector is not in use to protect it from environmental elements.
• Johdon reititys: Ensure all wiring remains securely fastened and away from hot or moving parts. Replace any damaged zip ties.
• Sulakkeen tarkistus: If trailer lights fail to operate, check the fuse in the inline fuse holder. Replace with a fuse of the same ampikäraja, jos se on palanut.

7. Vianmääritys

If you experience issues with your trailer lights, follow these steps:

1. Tarkista liitännät: Ensure all T-connector plugs, power wire connections, and the ground wire are securely attached.
2. Tarkista sulake: Verify the fuse in the inline fuse holder is not blown. Replace if necessary.
3. Test Trailer Lights: Connect the trailer to another vehicle (if available) to determine if the issue is with the trailer's wiring or the vehicle's harness.
4. Vehicle Lights: Confirm that your vehicle's taillights, brake lights, and turn signals are functioning correctly without the trailer connected.
5. Korroosio: Check the 4-way flat connector pins and sockets for corrosion. Clean as needed.

If problems persist after following these steps, contact CURT customer support or a qualified automotive technician.

8. Tekniset tiedot

9. Aiheeseen liittyvät videot

The following videos provide additional information about CURT products and towing.

9.1. CURT | The First Name in Towing Products | This Is Family

This video showcases the CURT brand philosophy, highlighting family and the towing lifestyle. It features various towing scenarios and CURT products in use.

9.2. CURT 56023 T-Connector (General Overview)

Tämä video tarjoaa yleiskuvanview of CURT T-connector wiring harnesses, demonstrating their function and ease of installation. While not specific to the 56471 model, it illustrates the common principles of T-connector installation.

10. Takuu ja tuki

For warranty information, technical support, or to purchase replacement parts, please visit the official CURT website or contact their customer service department. Keep your purchase receipt and model number (56471) handy when contacting support.

CURT Websivusto: www.curtmfg.com