SENIX 4QL 4-tahtisen bensiinikäyttöisen maanmuokkaimen (TL4QL-L1) käyttöohje

1. Johdanto

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your SENIX 4QL 4-Cycle Gas Powered Tiller Cultivator. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.

The SENIX 4QL Tiller Cultivator is designed for preparing soil for planting, weeding, and general garden maintenance. It features a 46cc 4-cycle engine, offering a 15-inch tilling width and an 8-inch tilling depth.

2. Turvallisuustiedot

VAROITUS: Operating gasoline engine equipment can expose you to chemicals including engine exhaust, carbon monoxide, and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, gloves, and sturdy footwear, when operating the tiller.
• Keep hands, feet, and clothing away from rotating tines.
• Varmista, että työalueella ei ole sivullisia, lapsia eikä lemmikkejä.
• Never operate the tiller in an enclosed space due to the risk of carbon monoxide poisoning.
• Before performing any maintenance or clearing obstructions, always turn off the engine and ensure all moving parts have stopped.
• Handle fuel with extreme care. Store gasoline in an approved container in a well-ventilated area, away from ignition sources.

3. Kokoonpano

The SENIX 4QL Tiller Cultivator requires minimal assembly. Typically, this involves attaching the handles and ensuring all components are securely fastened. Refer to the included assembly diagram for detailed steps.

• Kahvan kokoonpano: Attach the foldable handles to the main unit using the provided hardware. Ensure they are locked into the operating position before use.
• Pyörän säätö: The wheels can be adjusted. Drop the wheels when not in use for storage or transport, and raise them when tilling.

Figure 3.1: Adjustable wheels for transport and tilling.

4. Asennus

4.1 Tankkaus

The SENIX 4QL Tiller Cultivator is equipped with a 4-cycle engine. This means there is no need to mix gas and oil. Use fresh, unleaded gasoline with an octane rating of 87 or higher. The fuel tank capacity is 0.8 liters.

• Varmista, että moottori on sammutettu ja jäähtynyt ennen polttoaineen lisäämistä.
• Refuel in a well-ventilated outdoor area.
• Do not overfill the fuel tank. Leave space for fuel expansion.

4.2-moottoriöljy

The tiller includes engine oil. Before first use, ensure the engine oil level is correct. The oil tank capacity is 0.1 liters. Refer to the engine manual for specific oil type and checking procedures.

Figure 4.1: Engine view with fuel and oil components.

5. Käyttöohjeet

5.1 Moottorin käynnistäminen

The SENIX 4QL Tiller features an auto choke and compression release for easy starting.

1. Varmista, että polttoainesäiliö on täytetty ja öljynpinta on oikea.
2. Move the choke lever to the 'START' position (if applicable, some models have auto-choke).
3. Paina ryyppypalloa useita kertoja, kunnes polttoainetta näkyy.
4. Vedä käynnistysnarusta lujasti ja tasaisesti, kunnes moottori käynnistyy.
5. Kun moottori käynnistyy, siirrä rikastinvipu vähitellen 'RUN'-asentoon.

5.2 Muokkaus

The tiller is equipped with 6 premium steel forward rotating tines, offering a 15-inch tilling width and 8-inch tilling depth.

• Ensure the adjustable wheels are in the raised position for tilling.
• Pidä kahvoista tiukasti kiinni molemmin käsin.
• Engage the throttle to begin tilling.
• Guide the tiller slowly and steadily through the soil. Do not force the machine.
• The tiller is suitable for various terrains including dry ground, hard soil, muddy ground, and weedy ground.

Figure 5.1: Tilling width and depth capabilities.

Figure 5.2: Tiller suitability for various soil types.

5.3 Moottorin pysäyttäminen

To stop the engine, release the throttle and move the engine switch to the 'OFF' position.

6. Huolto

Säännöllinen huolto varmistaa jyräsi pitkän käyttöiän ja optimaalisen suorituskyvyn.

• Puhtaus: After each use, clean the tiller, especially the tines, to remove soil, debris, and plant matter.
• Piikkien tarkastus: Periodically check the tines for wear, damage, or obstructions. Remove any wrapped material like wire or roots.
• Irrotettava terä: The tiller features a removable blade for convenient cleaning and maintenance. Refer to the manual for instructions on safe removal and reinstallation.
• Öljynvaihdot: Follow the manufacturer's recommendations for regular engine oil changes.
• Ilmansuodatin: Inspect and clean or replace the air filter as needed to ensure proper engine performance.

Figure 6.1: Removable blade for convenient cleaning.

7. Vianmääritys

If you encounter issues with your tiller, consult the following common troubleshooting tips:

If problems persist after attempting these solutions, please contact SENIX customer service.

8. Tekniset tiedot

9. Takuu ja tuki

The SENIX 4QL Gas Powered Tiller Cultivator is backed by a 3 vuoden rajoitettu takuu. For warranty claims, technical assistance, or to order replacement parts, please contact SENIX customer service.

For further information and support, you may visit the official SENIX websivustolta tai katso tuotepakkauksessa olevat yhteystiedot.

10. Tuote ohiview Video