Creality Ender-3 S1 Pro 3D-tulostimen käyttöohje

Tuote loppuview

The Creality Ender-3 S1 Pro is an advanced FDM (Fused Deposition Modeling) 3D printer designed for high-temperature printing and enhanced user experience. It features a robust build, precise leveling capabilities, and a user-friendly interface, making it suitable for a wide range of printing projects.

Figure 1: The Creality Ender-3 S1 Pro 3D Printer actively printing a dolphin model.

Tärkeimmät ominaisuudet:

• 300°C High-Temperature Nozzle: Equipped with a brass nozzle capable of reaching 300°C, supporting a wide range of filaments including PLA, ABS, PVA, Wood, TPU, PETG, and PA.
• "Sprite" Full-metal Dual-gear Direct Extruder: Provides an 80N extrusion force for smooth and consistent filament feeding, particularly beneficial for flexible materials like TPU.
• CR Touch Automatic Leveling: Features a 16-point automatic leveling system that quickly compensates for bed height variations, ensuring optimal first layer adhesion.
• Spring Steel PEI Magnetic Build Plate: Offers excellent adhesion for printed models and allows for rapid heating. Its durable and flexible nature enables effortless removal of finished prints with a slight bend.
• 4.3-Inch Touch Screen & LED Light: A responsive touch screen with multi-language support provides intuitive UI interaction. An integrated LED light illuminates the print area for clear observation, even in low-light conditions.
• 32-bit Silent Motherboard: Ensures quiet operation during printing.
• Filament Run-out Sensor: Automatically pauses printing when filament runs out, preventing failed prints.
• Jatka tulostusta -toiminto: Allows the printer to resume printing from where it left off after a power outage.

Asennus ja kokoonpano

The Ender-3 S1 Pro is designed for quick and easy assembly, with most components pre-installed. Follow the steps below to set up your printer.

Figure 2: Illustrated guide for the 96% pre-installed, six-step assembly of the printer.

Alkuasennuksen vaiheet:

1. Purkaminen: Carefully remove all components from the packaging and verify against the packing list.
2. Rungon kokoonpano: Attach the gantry to the base using the provided screws.
3. Ekstruuderin ja Hotendin asennus: Secure the Sprite direct extruder and hotend assembly to the X-axis carriage.
4. Johdotus: Connect all cables according to the included wiring diagram. Ensure secure connections for the hotend, bed, motors, and sensors.
5. Filamentin pidike: Mount the filament spool holder on top of the gantry.
6. Touch Screen Installation: Attach the 4.3-inch touch screen to the side of the printer base.
7. Virtaliitäntä: Connect the power cable and ensure the voltage switch is set correctly for your region (115V or 230V).

For detailed visual instructions, refer to the official assembly video provided by Creality.

Käyttöohjeet

This section covers the basic steps to operate your Ender-3 S1 Pro 3D printer, from loading filament to starting your first print.

Filamentin lataus:

• Aseta lankakela lankapitimeen.
• Feed the filament through the filament run-out sensor.
• Press the lever on the "Sprite" direct extruder and insert the filament into the hotend until it comes out of the nozzle.
• On the touch screen, navigate to the "Prepare" menu and select "Preheat PLA" or "Preheat ABS" depending on your filament type.

Automatic Bed Leveling (CR Touch):

The CR Touch system simplifies bed leveling, ensuring a perfect first layer.

• Ensure the build plate is clean.
• From the touch screen, select "Level" and then "CR Touch" to initiate the automatic leveling process. The printer will probe 16 points on the bed.
• After auto-leveling, perform a Z-offset adjustment if necessary to fine-tune the nozzle height.

Figure 3: The CR Touch sensor performing a 16-point automatic bed leveling scan.

Starting a Print:

• Prepare your 3D model using slicing software (e.g., Creality Slicer, Cura, Simplify3D) and save it as a .gcode file SD-kortille.
• Aseta SD-kortti tulostimen SD-korttipaikkaan.
• On the touch screen, select "Print" and choose your desired .gcode file.
• The printer will begin heating the nozzle and bed, then start printing.

Figure 4: The intuitive 4.3-inch color touch screen, providing easy access to printer controls and settings.

Huolto

Säännöllinen huolto varmistaa 3D-tulostimesi optimaalisen suorituskyvyn ja pitkän käyttöiän.

• Puhdista tulostusalusta: After each print, allow the PEI magnetic build plate to cool and gently remove the print. Clean the surface with isopropyl alcohol to ensure good adhesion for future prints.
• Suuttimien puhdistus: Periodically clean the nozzle to prevent clogs. Use a brass brush to remove any filament residue from the exterior of the nozzle. For internal clogs, perform a cold pull or use a nozzle cleaning needle.
• Voitele liikkuvat osat: Apply a small amount of lithium grease to the Z-axis lead screws and X/Y-axis rods every few months to ensure smooth movement.
• Tarkista hihnan kireys: Ensure the X and Y-axis belts are properly tensioned. They should be taut but not overly tight.
• Laiteohjelmistopäivitykset: Tarkista virallinen Creality website for the latest firmware updates to ensure your printer has the most current features and bug fixes.

Vianetsintä

Tässä osiossa käsitellään yleisiä ongelmia, joita saatat kohdata, ja niiden mahdollisia ratkaisuja.

Tekniset tiedot

Figure 5: Detailed dimensions of the Ender-3 S1 Pro 3D Printer.

Takuu ja tuki

For warranty information, technical support, and service inquiries, please refer to the official Creality 3D websivustolta tai ota yhteyttä suoraan heidän asiakaspalveluunsa. Säilytä ostokuitti ostotodistuksena takuuvaatimuksia varten.

Valmistaja: Luovuus 3D

Päivämäärä, kun ensimmäinen saatavilla: 26. helmikuuta 2022