TM617 Digitaalinen aikakytkin Käyttöohje

1. Johdanto

This user manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER TM617 Digital Time Switch. The TM617 is a weekly programmable electronic timer designed for controlling electrical appliances with precision, offering a large LCD display for clear visibility.

Please read this manual thoroughly before using the device to ensure proper function and safety.

Kuva 1: Etuosa view of the TM617 Digital Time Switch.

2. Turvallisuustiedot

• Varmista, että virtalähde on irrotettu ennen asennusta tai huoltoa sähköiskun välttämiseksi.
• This device should be installed by a qualified electrician in accordance with local electrical codes.
• Älä altista laitetta kosteudelle, äärimmäisille lämpötiloille tai syövyttäville ympäristöille.
• Do not disassemble or modify the device. Any unauthorized modifications will void the warranty.
• Tarkista voltage rating of the device (110V/220V) matches your power supply before connection.

3. Tuotteen ominaisuudet

• Suuri LCD-näyttö selkeää ja helppoa lukemista varten.
• Weekly programmable with up to 16 ON/OFF settings per day.
• Built-in rechargeable battery for memory backup when power is off.
• High accuracy and strong anti-interference capability.
• Manuaalinen ohitustoiminto.
• Suitable for controlling street lights, neon lights, advertising signs, production equipment, broadcast television, and other power loads.

4. Pakkauksen sisältö

Tarkista pakkauksen sisältö avatessasi:

• 1 x SINOTIMER TM617 Digital Time Switch
• 1 x Käyttöohje (tämä asiakirja)
• Mounting Screws (if included with your specific model)

Figure 2: TM617 with protective cover open and mounting screws.

5. Asennus ja asennus

5.1 Asennus

The TM617 can be mounted on a wall or panel. Ensure a stable surface and adequate ventilation. Refer to the dimensional diagram for precise measurements.

Figure 3: TM617 Dimensional and Installation Diagram.

5.2 Kytkentäkaavio

Connect the power supply and load according to the wiring diagram provided on the device or in the detailed product specifications. Ensure all connections are secure and insulated. Incorrect wiring can damage the device or cause electrical hazards.

• Syöttöteho: Connect the 110V/220V AC power supply to the designated input terminals.
• Kuorman lähtö: Connect the appliance or load to be controlled to the output terminals.

Note: The internal battery charges when the device is connected to power. Allow several hours for the battery to fully charge before initial programming if the device has been stored for a long period.

6. Käyttöohjeet

6.1 Painikkeiden toiminnot

• P (Ohjelma): Siirtyy ohjelmointitilaan tai poistuu siitä.
• P+ (Päivä): Adjusts day of the week in setting mode; selects day in program mode.
• H+ (Tunti): Adjusts hour in setting mode; selects hour in program mode.
• M+ (minuutti): Adjusts minute in setting mode; selects minute in program mode.
• C/R (Cancel/Recall): Resets current setting; recalls programs.
• Clock Icon (Set Time): Press to enter time setting mode.
• Manual Override Button (Hand Icon): Toggles between ON/AUTO/OFF modes.

Figure 4: TM617 Buttons and Display.

6.2 Nykyisen kellonajan ja päivämäärän asettaminen

1. Paina ja pidä painettuna Kellon kuvake -painiketta.
2. Kun pidät Kellon kuvake, paina D+ to set the current day of the week (MO, TU, WE, TH, FR, SA, SU).
3. Kun pidät Kellon kuvake, paina H+ asettaaksesi nykyisen tunnin.
4. Kun pidät Kellon kuvake, paina M+ asettaaksesi nykyisen minuutin.
5. Vapauta Kellon kuvake -näppäintä tallentaaksesi asetukset.

6.3 PÄÄLLE/POIS-syklien ohjelmointi

The TM617 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Paina P -painiketta kerran. Näytössä näkyy "1 ON".
2. Paina D+ to select the day(s) for the first ON program (e.g., MO, TU, WE, TH, FR, SA, SU, or specific combinations).
3. Paina H+ to set the hour for the first ON program.
4. Paina M+ to set the minute for the first ON program.
5. Paina P -painiketta uudelleen. Näytössä näkyy "1 OFF".
6. Repeat steps 2-4 to set the day(s), hour, and minute for the first OFF program.
7. Jatka painamista P to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", setting each program as needed.
8. Kun olet asettanut kaikki haluamasi ohjelmat, paina Kellon kuvake -painiketta poistuaksesi ohjelmointitilasta ja palataksesi nykyisen ajan näyttöön.

To clear a specific program, press C/R when that program is displayed in programming mode.

6.4 Manuaalinen ohitus

The manual override button (hand icon) allows you to temporarily or permanently change the output state without affecting programmed settings.

• Paina Manuaalinen ohitus painiketta selataksesi tiloja:
• PÄÄLLÄ: Output is continuously ON, ignoring programs.
• AUTO: Output follows programmed ON/OFF cycles.
• OFF: Output is continuously OFF, ignoring programs.
• Valitse AUTO for normal operation based on your programmed schedule.

7. Huolto

• Puhdista laite säännöllisesti pehmeällä, kuivalla liinalla. Älä käytä hankaavia puhdistusaineita tai liuottimia.
• Ensure the device is kept free from dust and debris to maintain proper ventilation.
• The internal battery is designed for long life and typically does not require replacement. If the display becomes dim or settings are lost frequently, the battery may need servicing by a qualified technician.

8. Vianmääritys

9. Tekniset tiedot

10. Takuu ja tuki

SINOTIMER products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your original retailer or the SINOTIMER customer service department. Please have your product model number (TM617) and purchase date available when contacting support.

For the most up-to-date information, please visit the official SINOTIMER websivustolta tai katso tuotepakkaus.