BOSCH BM2018 5/8" x 13" Carbide Tip Masonry Drill Bit

1. Tuote ohiview

The Bosch BM2018 5/8" x 13" Carbide Tip Masonry Drill Bit is engineered for efficient drilling in masonry, brick, and block materials. This bit is specifically designed for use with rotary drills only ja on not suitable for hammer drills. Its single-flute design facilitates fast drilling and optimized material removal, allowing for use in high-speed modes with cordless drills.

Keskeisiä ominaisuuksia ovat:

• Fast Spiral Rotary Masonry Bit: Designed for drilling in masonry, block, and brick with a rotary drill, ensuring fast drilling and extended life.
• Flute Design: Provides rapid material removal during operation.
• Carbide Head: Delivers long life in demanding masonry applications.
• Tarkkuusvalmistus: Engineered to minimize bit walking for clean, accurate starts.
• High-Speed Mode Compatibility: Optimized for performance in cordless high-speed drilling modes.

Image 1.1: The BOSCH BM2018 5/8" x 13" Carbide Tip Masonry Drill Bit.

2. Turvallisuustiedot

Always prioritize safety when operating power tools. Failure to follow these safety guidelines may result in serious injury.

• Käytä henkilönsuojaimia (PPE): Always wear safety glasses or goggles, hearing protection, and appropriate work gloves. A dust mask is recommended when drilling masonry.
• Työkappaleen kiinnitys: Varmista, että porattava materiaali on tukevasti kiinniamptai pidettynä liikkeen estämiseksi käytön aikana.
• Use Correct Drill Type: This bit is designed for rotary drills only. Do not use with hammer drills, as this can damage the bit and the drill, and may cause injury.
• Tarkista terä ennen käyttöä: Tarkista poranterä vaurioiden, halkeamien tai liiallisen kulumisen varalta. Älä käytä vaurioituneita teriä.
• Oikea ilmanvaihto: Work in a well-ventilated area to avoid inhaling dust, especially when drilling concrete or masonry.
• Vältä ylikuumenemista: Allow the drill bit to cool periodically during prolonged use to prevent overheating, which can reduce bit life and performance.
• Pidä kädet puhtaina: Never touch the rotating drill bit or the area being drilled during operation.
• Irrota pistoke pistorasiasta ennen terien vaihtoa: Always disconnect the drill from the power source before changing bits or performing any maintenance.

Image 2.1: Always use appropriate safety measures, including dust extraction, when drilling.

3. Asennus

Proper setup ensures safe and effective drilling.

1. Select the Correct Drill: Ensure you are using a rotary drill. This bit is not for hammer drills.
2. Unplug the Drill: Before inserting or removing the drill bit, always ensure the drill is unplugged from the power source or its battery is removed.
3. Avaa istukka: Käännä poranterää vastapäivään, jotta leuat avautuvat riittävän leveälle poranterän varren asettamista varten.
4. Aseta bitti: Insert the shank of the BM2018 masonry drill bit into the chuck. Ensure it is inserted as far as possible without the flutes touching the chuck jaws.
5. Kiristä istukka: Rotate the chuck clockwise to securely tighten the jaws around the drill bit shank. For keyless chucks, hand-tighten firmly. For keyed chucks, use the chuck key to tighten securely, ensuring all three jaws grip the bit evenly.
6. Varmista turvallisuus: Give the drill bit a gentle tug to confirm it is firmly seated and will not slip during operation.

4. Käyttöohjeet

Follow these steps for effective drilling in masonry, brick, and block.

1. Merkitse porauskohta: Merkitse selvästi tarkka kohta, johon aiot porata.
2. Aseta poranterä: Hold the drill firmly with both hands, ensuring a stable grip. Align the drill bit with the marked spot at a 90-degree angle to the surface.
3. Aloita hitaasti: Begin drilling at a slow speed to create a pilot indentation and prevent the bit from walking. The precision manufacturing of this bit helps reduce walking.
4. Lisää nopeutta ja painetta: Once the bit has engaged the material, gradually increase the drill speed. Apply steady, moderate pressure. Avoid excessive force, which can cause the bit to overheat or break.
5. Pidä yllä tasaista nopeutta: For optimal performance, maintain a consistent drilling speed. This bit is designed for efficient material removal, even in high-speed modes.
6. Puhdista roskat: Periodically withdraw the drill bit slightly from the hole to allow debris to clear from the flutes. This prevents clogging and reduces heat buildup.
7. Täydennä reikä: Jatka poraamista, kunnes haluttu syvyys on saavutettu.
8. Withdraw the Bit: Once the hole is complete, slowly withdraw the drill bit from the hole while the drill is still rotating.

Image 4.1: The BM2018 drill bit in action, drilling into a brick surface.

5. Huolto

Proper maintenance extends the life and performance of your drill bit.

• Puhdistus: After each use, clean the drill bit to remove dust and debris. A stiff brush or compressed air can be used.
• Voitelu (valinnainen): For very hard materials or prolonged drilling, a small amount of cutting fluid or water can be used to cool the bit and reduce friction. Ensure the drill is rated for wet drilling if using water.
• Varastointi: Store the drill bit in a dry place to prevent rust. Keep it in its original packaging or a drill bit case to protect the carbide tip from damage.
• Tarkastus: Regularly inspect the bit for signs of wear, dullness, or damage. A dull bit will drill slowly and generate excessive heat. Replace worn or damaged bits immediately.

6. Vianmääritys

Tässä on joitain yleisiä ongelmia ja niiden ratkaisuja:

• Bit is drilling slowly or not cutting:
  • The bit may be dull or worn. Replace the bit.
  • Insufficient pressure is being applied. Increase steady pressure.
  • Debris is clogging the flutes. Withdraw the bit periodically to clear debris.
• Bit is overheating:
  • Excessive pressure or speed. Reduce pressure or speed.
  • Lack of debris removal. Clear flutes more frequently.
  • Prolonged continuous drilling. Allow the bit to cool down.
• Bit is walking or slipping at the start:
  • Not starting at a slow speed. Begin drilling at a very slow speed until the bit bites into the material.
  • Insufficient grip on the drill. Ensure a firm, two-handed grip.
• Liiallinen tärinä:
  • Bit is bent or damaged. Replace the bit.
  • Bit is not properly secured in the chuck. Re-tighten the chuck.

7. Tekniset tiedot

Image 7.1: Dimensional representation of a drill bit, indicating length.

8. Takuu ja tuki

Lisätietoja tuotteen takuusta, palautuksista tai teknisestä tuesta saat Boschin viralliselta osoitteelta. websivustolta tai ota yhteyttä suoraan Boschin asiakaspalveluun. Säilytä ostokuitti ostotodistuksena.

Boschin asiakaspalvelu:

• Käy Boschin virallisella sivustolla websivustolta yhteystiedot ja tukiresurssit.
• Refer to the packaging for any specific warranty cards or contact information.