1. Johdanto
The HQST 20A PWM Flush Mount Solar Charge Controller is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and protection. It is compatible with both 12V and 24V battery systems, supporting various battery types including Lithium, Sealed (AGM), Gel, and Flooded batteries. This manual provides essential information for proper installation, operation, and maintenance of your solar charge controller.
2. Tuote ohiview
Familiarize yourself with the components of your HQST solar charge controller:
This diagram illustrates the key components and dimensions of the HQST 20A PWM Flush Mount Solar Charge Controller. It measures approximately 5.11 inches in length and 3.54 inches in width.
- 5V 1A USB Port: For charging USB-compatible devices.
- Ylös ja alas-painike: Used for navigating display screens and adjusting settings.
- LCD-näyttö: Shows real-time system data and settings.
- Load Button: Controls the DC load output.
- Kiinnitysreiät: For securing the controller during installation.
- Kuormaliittimet: Yhdistä tasavirtakuormiisi.
- Akun navat: Yhdistä akkupankkiisi.
- Solar Terminals: Connect to your solar panel array.
- Flat Mount Bracket: Optional bracket for surface mounting.
3. Asennus
3.1 Ohjaimen asennus
The controller offers flexible mounting options:
The controller can be installed using either a flush mount for a seamless look or a flat mount with the provided bracket. Choose a location that is dry, well-ventilated, and away from direct sunlight or heat sources.
- Uppoasennus: Integrate the controller directly into a panel or wall for a clean finish.
- Tasainen kiinnitys: Use the included bracket to mount the controller on a surface.
Ensure adequate space around the controller for air circulation to prevent overheating.
3.2 Johdotusliitännät
Follow the correct wiring sequence to prevent damage to the controller or battery:
- Liitä akku: First, connect the battery to the controller's battery terminals (7). Ensure correct polarity (positive to positive, negative to negative). The LCD will power on.
- Liitä aurinkopaneeli: Next, connect the solar panel to the controller's solar terminals (8). Ensure correct polarity.
- Kytke tasavirtakuorma: Finally, connect your DC loads to the controller's load terminals (6). Ensure correct polarity.
Katkaisujärjestys: To disconnect the system, reverse the order: disconnect the load, then the solar panel, and finally the battery.
This wiring diagram illustrates the proper connection order for the solar panel, battery, and DC load to the HQST solar charge controller.
When connecting wires, ensure they are inserted into the correct square socket for the cable, not the screw hole. Fully unscrew the terminal screws, insert the wire ends, then tighten the screws securely.
3.3 Akkutyypin asetus
The controller automatically recognizes 12V/24V Sealed (AGM), Gel, and Flooded batteries. For Lithium batteries, manual parameter setting is required:
The LCD display allows for manual adjustment of battery parameters, especially crucial for Lithium-ion batteries.
- Press and hold the 'Up & Down' button to enter the setting mode.
- Use the 'Up & Down' buttons to navigate to the battery type setting (e.g., "b01" for Gel, "b02" for Sealed, "b03" for Flooded, "b04" for Lithium).
- For Lithium batteries, further adjust charging voltage, ylipurkaustilavuustage, and other parameters as per your battery manufacturer's specifications.
- Press and hold the 'Load' button to save the settings and exit.
4. Käyttöohjeet
4.1 LCD-näytön navigointi
The LCD screen provides real-time monitoring of your solar system:
The intuitive LCD screen cycles through various operational data, including battery voltage, PV voitage, charge current, load current, controller temperature, and battery state of charge (SOC).
- Press the 'Up & Down' button (2) to manually cycle through the displayed parameters.
- The display will automatically cycle through parameters if no button is pressed for a few seconds.
4.2 Kuorman hallinta
The controller features a DC load output with multiple control modes:
- Press the 'Load' button (4) to manually turn the DC load output on or off.
- The controller supports 17 different load control modes, allowing for customized operation (e.g., dusk-to-dawn, timed operation). Refer to the full manual for detailed instructions on setting load modes.
4.3 USB-latausporttia
The integrated 5V 1A USB port (1) can charge small electronic devices. This port is active when the DC load output is enabled.
4.4 4-Stage Älykäs lataus
The controller employs an advanced 4-stagLatausalgoritmi akun kunnon ja käyttöiän optimoimiseksi:
This graph illustrates the voltage ja nykyinen profiles during the 4-stage charging process, including Bulk, Boost/Absorption, Float, and Equalization stages.
- Irtolataus: Tarjoaa maksimaalisen virran akun nopeaa lataamista varten.
- Boost/Absorption Charge: Pitää äänenvoimakkuuden vakionatage to ensure the battery is fully charged without overcharging.
- Kelluva veloitus: Vähentää tilavuuttatagalemmalle tasolle akun pitämiseksi täydessä latauksessa ja itsepurkautumisen kompensoimiseksi.
- Tasoitusmaksu: (For lead-acid batteries only) Periodically overcharges the battery to balance cell voltagja estävät sulfaation.
5. Huolto
To ensure the longevity and optimal performance of your HQST solar charge controller, perform the following maintenance checks:
- Säännöllinen tarkastus: Periodically check all wiring connections for tightness and signs of corrosion. Loose connections can cause voltagputoaminen ja ylikuumeneminen.
- Puhtaus: Keep the controller's exterior clean and free from dust, dirt, and debris. Use a dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
- Ilmanvaihto: Ensure that the installation area remains well-ventilated to allow for proper heat dissipation. Blocked vents can lead to overheating and reduced efficiency.
- Akun kunto: Monitor your battery's health and performance regularly. Follow the battery manufacturer's maintenance guidelines.
6. Vianmääritys
Jos aurinkolataussäätimessäsi on ongelmia, katso seuraavat yleiset ongelmat ja ratkaisut:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Controller Display is Off | Akku ei saa virtaa tai akku on kytketty väärin. | Tarkista akun liitännät ja varmista oikea napaisuus. Tarkista akun varaustila.tage on yli vähimmäiskäyttötilavuudentage. |
| Akku ei lataudu | No solar input, incorrect solar panel connection, or faulty solar panel. | Ensure solar panels are receiving adequate sunlight. Check solar panel wiring for correct polarity and secure connections. Test solar panel voltage. |
| DC Load Not Working | Load output disabled, incorrect load connection, or over-discharge protection active. | Press the Load button to enable output. Check load wiring for correct polarity and secure connections. Verify battery voltage is above the over-discharge protection threshold. |
| Error Code Displayed (e.g., E02) | Specific system fault (e.g., E02 typically indicates over-discharge). | Consult the full product manual for a complete list of error codes and their corresponding solutions. Address the underlying issue (e.g., charge battery for E02). |
If the problem persists after attempting these solutions, please contact HQST customer support.
7. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Malli | 20A PWM Flush Mount |
| System Voltage | 12V / 24V Auto-recognition (Lithium batteries require manual setting) |
| Suurin latausvirta | 20A |
| Akkuyhteensopivuus | Lithium, Sealed (AGM), Gel, Flooded |
| Lataus Stages | 4-Stage (Bulk, Boost/Absorption, Float, Equalization) |
| USB-lähtö | 5V 1A |
| Näytön tyyppi | LCD |
| Tuotteen mitat (P x L x K) | 5.11 x 3.54 x 1.36 tuumaa |
| Tuotteen paino | 9.1 unssia |
| Maksimilämpötila | 45 °C (113 °F) |
| Suojausominaisuudet | Reverse polarity, over-voltage, over-current, over-discharge, short-circuit, reverse current. |
8. Takuu ja tuki
This HQST product is backed by a 10 vuoden takuu, reflecting our commitment to quality and durability. For any technical assistance, troubleshooting, or warranty claims, please contact HQST customer support.
You can find contact information and additional resources on the official HQST websivusto: www.hqst.com
Please have your product model number (20A PWM Flush Mount) and purchase details ready when contacting support.
