True Manufacturing GDM-72-HC~TSL01 Lasiovien myyntilaitteen käyttöohje

1. Tuote ohiview

The True Manufacturing GDM-72-HC~TSL01 is a commercial glass door merchandiser designed for displaying and refrigerating packaged food and beverages. This unit features an oversized refrigeration system for optimal product temperatures and energy efficiency. It is constructed with high-quality materials for durability and an attractive presentation.

Keskeisiä ominaisuuksia ovat:

• High capacity, factory balanced refrigeration system.
• Lämpötila-alue: 33°F - 38°F (0.5°C - 3.3°C).
• Non-peel or chip black powder coated cold rolled steel exterior.
• White aluminum interior with stainless steel floor.
• Double pane thermal insulated glass sliding doors.
• Adjustable heavy-duty PVC coated wire shelves.
• LED-sisävalaistus parantaa tuotteiden näkyvyyttä.
• Easily accessible condenser coil for cleaning.

Kuva 1: Etuosa view True Manufacturing GDM-72-HC~TSL01 -lasiovimyyjästä.

2. Asennus ja asennus

2.1 Pakkauksesta purkaminen

Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and your dealer. Retain all packaging materials for inspection.

2.2 Sijoitus

This unit is designed for freestanding installation. Ensure the merchandiser is placed on a level, sturdy surface capable of supporting its weight when fully loaded. Allow adequate clearance around the unit for proper ventilation and maintenance. The product dimensions are approximately 28.88 x 78.13 x 78.63 inches (W x D x H).

2.3 Sähköliitäntä

The merchandiser requires a dedicated 115/60/1 electrical supply with a NEMA-5-15R receptacle. Ensure the electrical supply matches the unit's requirements and that a qualified electrician performs the connection if necessary. Do not use extension cords.

2.4 Hyllyjen asennus

The unit comes with adjustable heavy-duty PVC coated wire shelves. Install the shelves by placing them on the shelf clips provided. Adjust the shelf height as needed to accommodate various product sizes. Ensure shelves are level and securely seated.

2.5 Oven käyttö

The merchandiser features double pane thermal insulated glass sliding doors. Ensure the doors slide smoothly and seal properly when closed to maintain optimal internal temperature.

3. Käyttöohjeet

3.1 Ensimmäinen käyttöönotto

After connecting the unit to power, allow it to run for several hours to reach the desired operating temperature before loading products. The factory-set temperature range is typically 33°F to 38°F (0.5°C to 3.3°C).

3.2 Lämpötilan säätö

The merchandiser is equipped with a temperature control system. Refer to the control panel for specific instructions on adjusting the temperature settings. Maintain the recommended temperature range for optimal product preservation.

3.3 Tuotteen lataaminen

Load products evenly on the shelves. Do not block the internal air vents, as this can impede airflow and affect cooling performance. Avoid overloading shelves to prevent damage and ensure proper air circulation.

3.4 Sisävalaistus

The unit features LED interior lighting to illuminate products. The lighting can typically be controlled via a switch, allowing for enhanced product visibility.

4. Huolto

Regular maintenance ensures the longevity and efficient operation of your merchandiser.

4.1 Ulko- ja sisäosien puhdistaminen

• Ulkopuoli: Clean the exterior surfaces with a mild soap and water solution. Wipe dry with a soft cloth. Avoid abrasive cleaners.
• Sisustus: Remove all products and shelves. Clean the interior with a mild, food-safe cleaning solution. Rinse thoroughly and dry before replacing products.
• Lasiovet: Use a glass cleaner for the doors. Avoid spraying directly onto the seals.

4.2 Lauhduttimen kelan puhdistus

The condenser coil should be cleaned regularly to maintain optimal cooling efficiency and prevent compressor strain. The unit features an easily accessible condenser coil. Refer to the technical diagrams for location and access. Use a brush or vacuum cleaner to remove dust and debris from the coil fins.

4.3 Sulatusjärjestelmä

This merchandiser is equipped with an automatic defrost system. No manual defrosting is typically required. Ensure the drain pan is clear and free of obstructions.

5. Vianmääritys

Ennen kuin otat yhteyttä huoltoon, tarkistaview seuraavat yleiset ongelmat ja ratkaisut:

• Yksikkö ei jäähdytä: Check if the power cord is securely plugged in. Verify the circuit breaker has not tripped. Ensure the temperature control is set correctly. Clean the condenser coil if it is dirty.
• Liiallinen melu: Check if the unit is level. Ensure no objects are vibrating against the unit. Verify fan blades are not obstructed.
• Vesi lattialla: Check if the drain line is clogged or disconnected. Ensure the unit is level.
• Doors Not Sealing Properly: Inspect door gaskets for damage or debris. Ensure shelves are not obstructing door closure.

Jos ongelmat jatkuvat näiden ratkaisujen kokeilemisen jälkeen, ota yhteyttä pätevään huoltohenkilöstöön.

6. Tekniset tiedot

Figure 2: Technical specifications and dimensions.

Figure 3: Detailed technical drawing and warranty information.

7. Takuutiedot

The True Manufacturing GDM-72-HC~TSL01 comes with a kolmen vuoden takuu on all parts and labor. Additionally, an additional two-year warranty is provided specifically for the compressor. This warranty covers defects in materials and workmanship under normal use and service.

For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official True Manufacturing websivusto.

8. Asiakastuki

For technical assistance, parts, or service inquiries, please contact True Manufacturing customer support. When contacting support, please have your model number (GDM-72-HC~TSL01) and serial number readily available.

You can find more information and contact details on the official True Manufacturing websivusto: www.truemfg.com