1. Tuote ohiview
The One Control Crocodile Tail Loop Wing (OC10W) is an advanced programmable 10-channel loop switcher designed to optimize your guitar effects setup. It integrates user feedback and technical advancements to provide flexible signal routing, comprehensive MIDI control, and convenient remote programming via Bluetooth.
Kuva 1: Etuosa view of the One Control Crocodile Tail Loop Wing (OC10W), showing the display, footswitches, and input/output jacks.
2. Asennusopas
2.1. Virtaliitäntä
Connect a standard 9V DC power supply (not included) to the 9V DC input jack on the rear panel of the OC10W. Ensure the power supply meets the required specifications (9V, 150mA minimum).
2.2. Ääniliitännät
- Connect your guitar or instrument to the INPUT Jack.
- Yhdistä OUT1 or OUT2 Jack sinulle amplifier'in panos.
- For each effect pedal, connect the pedal's input to a LÄHETÄ jack (e.g., SEND1) and the pedal's output to the corresponding PALATA jack (e.g., RETURN1). The OC10W features seven serial mono loops (SEND1-7/RETURN1-7) and three parallel loops (SEND8-10/RETURN8-10).
- The VIRITIN output can be connected to a dedicated tuner pedal. This output features a mute switch for silent tuning.
Kuva 2: Takaosa view of the OC10W, illustrating the various input, output, send, and return jacks for audio connections.
2.3. MIDI-liitännät
Use standard MIDI cables to connect the MIDI IN ja MIDI OUT jacks to other MIDI-compatible devices for comprehensive control and synchronization.
2.4. Bluetooth Pairing (Winglink App)
The OC10W can be controlled and programmed remotely via the Winglink iOS app. Ensure Bluetooth is enabled on your iOS device and follow the app's instructions to pair with the OC10W. Look for the Winglink logo on the device.
Figure 3: Close-up of the Winglink logo, indicating Bluetooth connectivity for the iOS app.
3. Käyttö
3.1 Toimintatavat
The OC10W supports two primary modes of operation:
- Ohjelmatila: Allows you to store and recall complex effect pedal combinations and MIDI commands as presets. The OC10W offers 168 MIDI presets.
- Manuaalinen tila: Enables direct control over individual loops via the footswitches, allowing you to turn effects on and off instantly without recalling a preset.
3.2. Footswitch Functions
The OC10W features multiple footswitches for versatile control:
- PROGRAM / LOOP Footswitches (1-7): In Program Mode, these recall specific presets. In Manual Mode, they activate/deactivate the corresponding effect loops.
- BANK+ / LOOP8 Footswitch: Used to increment banks in Program Mode or control Loop 8 in Manual Mode.
- MUTE / LOOP9 Footswitch: Mutes the output for silent tuning or controls Loop 9.
- FS3 / MULTI JACK Footswitch: Controls external devices via the FS3 jack or acts as a multi-function switch.
- FS1, FS2, SLV: Additional footswitches for various control functions, often configurable.
Kuva 4: Lähikuva view of the OC10W's footswitch section, including the main program/loop switches and control switches.
3.3. Näyttö ja merkkivalot
The central display shows the current bank/index, program number, or custom name. LED indicators provide visual feedback on active loops, MIDI status, and other functions.
Figure 5: Close-up of the OC10W's digital display, showing a typical preset indication.
4. Huolto
To ensure the longevity and optimal performance of your One Control Crocodile Tail Loop Wing, follow these maintenance guidelines:
- Puhdistus: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
- Varastointi: Säilytä laitetta viileässä, kuivassa paikassa, poissa suorasta auringonvalosta, äärimmäisistä lämpötiloista ja korkeasta kosteudesta.
- Liitännät: Periodically check all cable connections (audio, MIDI, power) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
- Jalkakytkimet: While designed for durability, avoid excessive force when operating the footswitches.
5. Vianmääritys
If you encounter issues with your OC10W, refer to the following common problems and solutions:
| Ongelma | Mahdollinen syy | Ratkaisu |
|---|---|---|
| Ei virtaa/laite ei käynnisty | Incorrect power supply; Loose power connection; Faulty power supply | Ensure a 9V DC power supply is correctly connected. Verify power supply functionality. |
| No sound/Signal loss | Incorrect audio connections; Faulty cables; Loop not active; Tuner mute engaged | Check all input, output, send, and return cables. Ensure the correct loops are active. Disengage tuner mute if active. |
| MIDI-ohjaus ei toimi | Incorrect MIDI connections; MIDI channel mismatch; Incorrect MIDI settings | Verify MIDI In/Out connections. Ensure MIDI channels match between devices. Check MIDI settings in the OC10W and connected devices. |
| Bluetooth-yhteysongelmat | Bluetooth pois päältä laitteessa; Sovellusongelmat; Häiriöt | Ensure Bluetooth is enabled on your iOS device. Restart the Winglink app and the OC10W. Try pairing again. |
6. Tekniset tiedot
| Ominaisuus | Erittely |
|---|---|
| Malli | Crocodile Tail Loop Wing (OC10W) |
| Tehostetyyppi | Programmable 10-Channel Loop Switcher |
| Silmukat | 7x Serial Mono Loops, 3x Parallel Loops |
| Buffer Circuit | BJF Buffer (switchable) |
| Ohitustyyppi | True Bypass (when buffer is off) |
| Esiasetukset | 168 MIDI Presets |
| Ohjaus | Footswitches, Full MIDI Control, Bluetooth (Winglink iOS app) |
| Lisäominaisuudet | Tuner Out with Mute Switch, 3x FS Connectors (TRS), 8-pin DIN plug |
| Virtalähde | Johdollinen sähkö |
| Voitage | 9 volttia |
| Ampkorotus | 150 miljoonaaamps |
| Mitat (P x L x K) | 46.5 x 12 x 8.5 cm |
| Tuotteen paino | 1.6 kg |
| Laitteistorajapinta | Bluetooth |
| Signaalin muoto | Analoginen |
7. Takuu ja tuki
One Control products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact One Control customer service or visit their official websivusto. Säilytä ostokuitti takuuvaatimuksia varten.
Valmistaja: One Control
