Johdanto
This manual provides instructions for the Plustek OpticFilm Series Adapter (Model: OF adapter). This adapter is designed to provide power to compatible Plustek OpticFilm series scanners, including models 8100, 8200i, 7400, 7500, and 7600. Please read this manual thoroughly before use to ensure proper setup and operation.
Asennus
Purkaminen
Carefully remove the adapter and any included cables from the packaging. Verify that all components are present.
Sovittimen liittäminen
- Locate the power input port on your Plustek OpticFilm series scanner.
- Connect the proprietary connector of the Plustek OpticFilm Series Adapter to the scanner's power input port.
- Connect the power cord (if separate) to the adapter, then plug the power cord into a standard electrical outlet (100-240V AC, 50-60Hz).
- Ensure all connections are secure before powering on your scanner.
Toiminta
Once the adapter is correctly connected to your scanner and a power source, the scanner should receive power. The adapter functions automatically to provide the necessary power. Refer to your specific Plustek OpticFilm scanner's manual for instructions on powering on and operating the scanner itself.
Huolto
Yleinen hoito
- Pidä sovitin puhtaana ja pölyttömänä. Käytä puhdistamiseen pehmeää, kuivaa liinaa.
- Avoid exposing the adapter to moisture, liquids, or extreme temperatures.
- Älä yritä avata tai korjata sovitinta. Jätä kaikki huoltotyöt pätevän henkilöstön tehtäväksi.
- Varmista, että sovittimen ympärillä on asianmukainen ilmanvaihto käytön aikana ylikuumenemisen estämiseksi.
Vianetsintä
Scanner Not Powering On
- Tarkista virtaliitännät: Ensure the adapter is securely plugged into both the scanner and a functional electrical outlet.
- Verify Outlet Functionality: Testaa pistorasiaa toisella laitteella varmistaaksesi, että se syöttää virtaa.
- Tarkista kaapelit: Check the power cables for any visible damage or frayed wires. Replace if necessary.
- Vahvista yhteensopivuus: Ensure this adapter is the correct power supply for your specific Plustek OpticFilm scanner model.
Sovittimen ylikuumeneminen
- Varmista ilmanvaihto: Make sure the adapter is not covered and has adequate airflow around it.
- Disconnect if Hot: If the adapter feels excessively hot, disconnect it immediately from the power source and scanner. Allow it to cool down before reconnecting. If overheating persists, discontinue use and contact support.
Tekniset tiedot
| Ominaisuus | Yksityiskohta |
|---|---|
| Mallinumero | OF adapter |
| Tulo Voltage | 100-240V AC |
| Tulotaajuus | 50-60 Hz |
| Lähtö Voltage | 15.0V DC |
| Lähtövirta | 1.2 Amps |
| Wattage | 18 wattia |
| Liittimen tyyppi | Omistusoikeus |
| Mukana olevat komponentit | 2 x USB-kaapeli (Note: USB cables are typically for data transfer, not power for this adapter) |
| Pakkauksen mitat | 4.17 x 3.23 x 2.4 tuumaa |
| Tuotteen paino | 6.4 unssia |
Takuutiedot
For detailed warranty information regarding your Plustek OpticFilm Series Adapter, please refer to the warranty card included with your product or visit the official Plustek website. Warranty terms and conditions may vary by region and are subject to change. Please retain your proof of purchase for warranty claims.
Asiakastuki
Should you require technical assistance or have questions about your Plustek OpticFilm Series Adapter, Plustek offers comprehensive customer support to ensure you get the most out of your product.
Available Support Channels:
- Realtime Online Zendesk Support: Access live chat support for immediate assistance with common issues or inquiries.
- USA Expert Phone Support: Contact our U.S.-based technical support team via phone for direct assistance.
- Online Form/Email Support: Submit your inquiries through our website's contact forms or via email for detailed responses.
- Consultant Support: For specialized solution inquiries and Software Development Kit (SDK) support, dedicated consultant support is available.
Saat ajantasaisimmat yhteystiedot ja tukiresurssit Plustekin viralliselta verkkosivustolta. websivusto.
