70mai Jump Starter MAX -käyttöohje

Johdanto

Thank you for choosing the 70mai Jump Starter MAX. This device is designed to provide a reliable solution for jump-starting 12V vehicles with dead batteries and also functions as a portable power bank. Please read this manual thoroughly before use to ensure safe and optimal operation.

Tuote loppuview

Tärkeimmät ominaisuudet

• Suuri kapasiteetti: Real 18,000mAh power bank with 500A start current and 1000A peak current.
• Laaja ajoneuvoyhteensopivuus: Designed for 12V vehicles, including petrol engines up to 8.0L and diesel engines up to 3.5L (Cars, SUVs, motorcycles, trucks, and more).
• Edistyneet turvallisuussuojaukset: Features over charge/discharge protection, reverse connection protection, temperature protection, over current protection, over voltage protection, short circuit protection, and reverse charging protection.
• Extreme Weather Adaptability: Operates effectively across a wide range of temperatures.
• Monikäyttöinen: Includes a helpful LED light and can charge electronic devices via USB.

Image: High Peak Current and Battery Capacity.

Image: Extreme Weather Adaptability.

Image: Wide Adaptability to Most Vehicles.

Pakkauksen sisältö

The 70mai Jump Starter MAX package includes the following items:

• 70mai Jump Starter Max unit
• USB-latauskaapeli
• Smart battery clip (jump start cable)
• Säilytyspussi
• Cigarette lighter socket cable
• Käyttöopas

Image: Contents of the 70mai Jump Starter MAX package.

Turvallisuustiedot

Please observe the following safety precautions to prevent injury or damage to the device and vehicle:

• Always ensure the jump starter is sufficiently charged before use.
• Connect the smart battery clip correctly: red clamp positiiviseen (+), musta clamp to negative (-). Incorrect connection can cause sparks or damage.
• Älä koske punaiseen ja mustaan ​​clampyhdessä, kun ne on kytketty apukäynnistimeen.
• Do not attempt to jump start a vehicle if the jump starter or cables are damaged.
• Pidä laite poissa lasten ulottuvilta.
• Käytä laitetta hyvin ilmastoidussa tilassa.
• Älä altista laitetta äärimmäisille lämpötiloille tai suoralle auringonvalolle pitkiä aikoja.
• Katso ajoneuvosi käyttöoppaasta tarkemmat apukäynnistysohjeet.

Asennus

Hyppykäynnistimen lataaminen

Before first use, fully charge the 70mai Jump Starter MAX. Connect the provided USB charging cable to the jump starter's input port and to a suitable USB power adapter (not included). The indicator lights on the device will show the charging status. Ensure all lights are solid, indicating a full charge, before storing or using for jump-starting.

Image: Jump Starter MAX with USB ports for charging and power supply.

Käyttöohjeet

Ajoneuvon hyppykäynnistys

1. Valmistele ajoneuvo: Ensure the vehicle's ignition is off and all accessories (lights, radio, AC) are turned off. Engage the parking brake.
2. Connect the Smart Battery Clip:
   • Liitä punainen (+) liitinamp of the smart battery clip to the positive (+) terminal of the vehicle's dead battery.
   • Liitä musta (-) liitinamp of the smart battery clip to the negative (-) terminal of the vehicle's dead battery.
   • Ensure a secure connection to both terminals.
3. Yhdistä Jump Starteriin: Plug the smart battery clip connector into the jump start port on the 70mai Jump Starter MAX. The indicator on the smart clip should show a green light, indicating a correct connection and readiness to jump start. If a red light or no light appears, check connections and battery status.
4. Käynnistä ajoneuvo: Once the smart clip indicates readiness, start your vehicle's engine. If the vehicle does not start immediately, wait 30 seconds before attempting again. Do not crank the engine for more than 3 seconds per attempt.
5. Katkaise yhteys: As soon as the vehicle starts, disconnect the smart battery clip from the 70mai Jump Starter MAX. Then, remove the black (-) clamp ajoneuvon akusta, jota seuraa punainen (+) -merkkivaloamp.

Image: 70mai Jump Starter MAX with smart battery clamps.

Käyttö tehopankina

The 70mai Jump Starter MAX can also be used to charge electronic devices. Connect your device's USB charging cable to the USB output port on the jump starter. The device will automatically begin charging. The cigarette lighter socket cable can be used to power compatible 12V accessories.

LED-valotoiminto

The integrated LED light can be activated by pressing the power button. It typically offers multiple modes (e.g., steady light, strobe, SOS signal). Press the button repeatedly to cycle through modes or turn off the light.

Huolto

• Lataa säännöllisesti: To maintain battery health, recharge the jump starter every 3-6 months, even if not used.
• Varastointi: Säilytä laitetta viileässä, kuivassa paikassa, poissa suorasta auringonvalosta ja äärimmäisistä lämpötiloista.
• Puhdistus: Pyyhi laite pehmeällä, kuivalla liinalla. Älä käytä voimakkaita kemikaaleja tai hankaavia puhdistusaineita.
• Kaapelin tarkastus: Periodically inspect the smart battery clip and cables for any signs of damage or wear. Replace if necessary.

Vianetsintä

Tekniset tiedot

Takuu ja tuki

The 70mai Jump Starter MAX comes with a 1 vuoden takuu from the date of purchase. For warranty claims, technical support, or any inquiries, please contact our support team:

• Sähköposti: support@nexdigitron.com
• WhatsApp/Call: 7737373626
• Websivusto: www.nexdigitron.com

Säilytä ostokuittisi takuun voimassaoloa varten.