RS PRO RSDS 1052 DL+ digitaalisen tallennusoskilloskoopin käyttöohje

1. Johdanto

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.

The RS PRO RSDS 1052 DL+ is a versatile 2-channel digital storage oscilloscope with a 50 MHz bandwidth, designed for precise signal analysis. It features a 7-inch TFT LCD display for clear waveform visualization and supports various measurement parameters and mathematical operations.

2. Turvallisuustiedot

Always adhere to the following safety precautions to prevent electric shock, fire, or damage to the instrument.

• Virtalähde: Varmista, että oskilloskooppi on kytketty virtalähteeseen, jonka jännite on määritetyllä jännitteellä.tage range (100-240V AC, 50/60Hz).
• Maadoitus: The instrument must be properly grounded to prevent electric shock. Do not defeat the grounding plug.
• Ympäristö: Operate the oscilloscope in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive dust.
• Koettimet: Use only probes supplied or recommended by RS PRO. Ensure probes are correctly rated for the voltage mitataan.
• Huolto: Jätä kaikki huoltotyöt pätevän huoltohenkilöstön tehtäväksi. Älä yritä avata laitetta.asing unless explicitly instructed.
• Turvallisuusluokka: This device is rated CAT I, CAT II. Observe all safety warnings on the device and in this manual.

3. Tuote ohiview ja komponentit

Tämä osio tarjoaa ylityksenview of the RS PRO RSDS 1052 DL+ oscilloscope and its main components.

Kuva 3.1: Etuosa View of the Oscilloscope. This image shows the front panel of the RS PRO RSDS 1052 DL+ oscilloscope, highlighting the 7-inch TFT LCD display, control knobs, function buttons, and input connectors for channels 1 and 2. The screen displays a typical waveform and FFT analysis.

Kuva 3.2: Kulmassa View of the Oscilloscope. This image provides an angled perspective of the RS PRO RSDS 1052 DL+ oscilloscope, showcasing its compact design and integrated handle for portability. The side ventilation grilles are also visible.

Kuva 3.3: Takaosa View of the Oscilloscope. This image displays the rear panel of the RS PRO RSDS 1052 DL+ oscilloscope, featuring the power input, USB device port, USB host port, LAN port, and Pass/Fail output. Safety warnings and product labels are also visible.

Figure 3.4: Oscilloscope Probe and Accessories. This image shows a passive oscilloscope probe (1:1/10:1) along with various accessories, including colored rings for channel identification and probe tip covers. These are essential for connecting signals to the oscilloscope.

Figure 3.5: Power Plugs and Probe Tip. This image displays an assortment of power plugs (EU, UK, US types) that may be included with the oscilloscope, along with a specialized probe tip. These ensure compatibility with various power outlets and provide versatility for measurements.

3.1 Mukana tulevat lisävarusteet

The RS PRO RSDS 1052 DL+ typically includes the following accessories:

• Passive Probe 1:1/10:1 (x2)
• USB-kaapeli
• Pika-aloitusopas
• Laatusertifikaatti
• Virtajohto (aluekohtainen)
• CD (including User Manual and EasyScopeX software)

4. Asennus

4.1 Pakkauksesta purkaminen ja tarkastus

1. Poista oskilloskooppi ja kaikki lisävarusteet varovasti pakkauksesta.
2. Inspect the instrument for any signs of physical damage during transit. If damage is found, contact your supplier immediately.
3. Verify that all included accessories listed in Section 3.1 are present.

4.2 Virtaliitäntä

1. Varmista, että takapaneelin virtakytkin on OFF-asennossa.
2. Kytke mukana toimitettu virtajohto oskilloskoopin takapaneelin AC-tuloon.
3. Plug the other end of the power cord into a grounded AC power outlet. The oscilloscope supports 100-240V AC, 50/60Hz.

4.3 Mittapään liitäntä ja kompensointi

1. Connect the BNC connector of the passive probe to one of the input channels (CH1 or CH2) on the front panel.
2. Attach the probe tip to the probe compensation output (usually a square wave test signal) on the front panel.
3. Adjust the compensation trimmer on the probe until the displayed square wave is flat-topped, without overshoot or undershoot. This ensures accurate measurements.

5. Käyttöohjeet

5.1 Peruskäyttö

• Virta päälle/pois: Press the power button on the front panel to turn the oscilloscope on or off.
• Automaattinen asennus: Paina Auto button to automatically adjust vertical, horizontal, and trigger settings for a stable waveform display.
• Pystysuuntaiset säätimet: Käytä VOLTS/DIV knob to adjust the vertical scale (voltage per division) and the SIJOITUS knob to move the waveform vertically.
• Vaakasuuntaiset säätimet: Käytä SEC/DIV knob to adjust the horizontal scale (time per division) and the SIJOITUS knob to move the waveform horizontally.
• Liipaisinsäätimet: Säädä TASO knob to set the trigger threshold. The trigger ensures a stable display of repetitive waveforms.

5.2 Lisätoiminnot

• Mittaustoiminnot: Paina Mitata button to access automatic measurement parameters such as Vpp, Vmax, Vmin, Freq, Period, etc.
• Matemaattiset funktiot: Paina Matematiikka button to perform mathematical operations on waveforms (e.g., Add, Subtract, Multiply, Divide, FFT).
• Storage and Recall: Käytä Tallenna/Muista buttons to save waveform data, setups, or screenshots to internal memory or a USB drive.
• USB-liitäntä: Connect a USB drive to the front panel USB host port for data storage. Use the rear USB device port to connect the oscilloscope to a PC for data transfer and control via EasyScopeX software.

6. Huolto

6.1 Puhdistus

• Irrota virtajohto ennen puhdistamista.
• Käytä pehmeää, damp cloth with mild detergent to clean the exterior of the instrument.
• Do not use abrasive cleaners or solvents that may damage the plastic parts.
• Varmista, ettei laitteen sisään pääse nestettä.

6.2 Kalibrointi

The oscilloscope is factory calibrated. For optimal performance, periodic calibration by qualified personnel is recommended, typically every 12-24 months, depending on usage and environmental conditions.

6.3 Varastointi

When not in use for extended periods, store the oscilloscope in a dry, dust-free environment, away from extreme temperatures and humidity.

7. Vianmääritys

Tässä osiossa on ratkaisuja yleisiin ongelmiin, joita saatat kohdata.

If the problem persists after attempting these solutions, please contact RS PRO customer support.

8. Tekniset tiedot

Key technical specifications for the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope:

• Analogiset kanavat: 2
• Oscilloscope Type: Digitaalinen tallennustila
• Kaistanleveys: 50 MHz
• Reaaliaikainen Sample Hinta: Up to 500 MSa/s
• Muistin syvyys: 32 kpts
• Näyttötyyppi: TFT LCD
• Näytön koko: 7 inches (800 x 480 pixels)
• Pystysuuntainen herkkyys: 2 mV/div - 10 V/div
• Aikaperusteinen alue: 10ns/div - 50s/div
• Virtalähde: Mains operated (100-240V AC, 50/60Hz)
• Paino: 2.5 kg
• Turvallisuusluokka: CAT I, CAT II
• Liitännät: RS232, USB Host, USB Device, LAN

9. Takuu ja tuki

RS PRO products are manufactured to high standards and are typically covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official RS PRO websivustolta tarkemmat takuuehdot.

For technical support, service, or inquiries regarding your RS PRO RSDS 1052 DL+ oscilloscope, please contact RS PRO customer service through their official channels. Contact information can usually be found on the RS PRO website or in the documentation provided with the product.

RS PRO Official Websivusto: https://uk.rs-online.com/web/